CATALOGUE 2010/2011 Mongrel Safety Boots These Mongrel Safety Work Boots are made to Australian Standard AS/NZS 2210.3.2009 Class1* or 2210.3.2000 class 1* and are a basic safety boot marked category SB. The boots are certified by TUV Rhineland Australia P/L,www.tuv.com. Mongrel Safety Boots are suitable for general industrial and agricultural use. The boots will feature either a TPU/PU sole or a Nitrile Rubber PU sole which have specific usage conditions. The sole type appears on the boots and on the inner tag. TPU/PU The maximum temperature in which TPU/PU soles can be used intermittent contact up to 130 c and continuous contact up to 110 c. Chemical contact avoid use with strong acids and alkalis >10% concentrations such as hydrochloric and sulphuric acids and caustic soda. The soles are oil resistant. Nitrile Rubber/PU For Nitrile Rubber/PU soles the maximum temperature for usage range is up to 300 c. The sole is acid, oil and heat resistant. The boots have a removable inner sole. For safety certification all testing is carried out with the inner sole in place and the boot should only be used with the inner sole in place for maximum safety in particular shock absorption. Should the innersole need to be replaced it is important to purchase one of a similar standard. Replacement innersoles can be purchased from sales outlets carrying the Mongrel Boots range. A list of stockists is available via our website www.mongrelboots.com.au Unauthorised alterations Any unauthorised alterations to footwear such as mechanical stretching or adding vent holes are discouraged as they may take the footwear out of compliance with this standard void any approval or certification of the footwear reduce the effectiveness of the footwear. Where alterations of the footwear are contemplated, advice should be sought from the manufacturers and approving authorities. Comfort and safety It is essential that the boots are properly fitted for maximum comfort and safety. Of special importance is to allow room under the cap for your toes to move. Your toes should not come into contact with any part of the toe cap. You should allow around 5mm between your toes and the back of the cap. Your heel should fit neatly into the back of the boot so that when walking, your boots do not move up and down on your heel. The boot should fit comfortably around your foot. Maximising the life of your Mongrel boots Store in dry and well ventilated environments air conditioned environments are ideal. Drying your boots should be at normal room temperature. Avoid forced heat drying and direct sunlight. Regular cleaning is recommended. Remove dirt and grime from the upper with a damp cloth and then apply boot polish or dubbin depending on leather type. With suede or nubuck leather, clean with a suede or nubuck brush. Soles should be cleaned regularly with water and allow to dry. The life of your boots is also related to the use to which they are exposed. Up to 5 years from date of manufacture can be expected with mild industrial use. * Only applies to Mongrel Safety range. Mongrel Boots Because what you do makes a difference to the boots you wear How to order Retail Mongrel Boots are available from a wide range of outlets including work wear specialist stores, disposal stores and can be found in leading country retailers of quality footwear. Should you wish to find an outlet near you please contact us by mail, phone, fax, email or use the dealer locator on www.mongrelboots.com.au Trade Please contact us by mail, phone, fax or email using the information below for a wholesale price list. We will require your store name and contact details. VICTOR FOOTWEAR Pty Ltd ACN 000 370 178 15 George Young St. Auburn NSW 2144 Australia Phone: (02) 8667 2555 Fax: (02) 8667 2500 Email: sales@mongrelboots.com.au Website: www.mongrelboots.com.au Mongrel Boots is a registered trademark of Victor Footwear Pty Ltd
Now there s a Mongrels that fits what you do Quality TPU and Rubber Soles At Victor Footwear we ve been making boots in Australia for Australian workers since 1930. Our new manufacturing facility in Sydney now manufactures work boots that represent the latest in technological advances in our industry. The new range of Mongrels Boots feature high quality materials required to meet the purpose to which the boots have been designed. Long wearing rubber soles for tough work places. A variety of leather upper grades matched to the need for performance. Sole designs created with traction needs of a wide variety of occupations in mind. Our Mongrel SP Series were originally designed to incorporate the most significant technological, comfort and safety features into one premium range. Now we ve taken that foundation and created a range with all the best technology plus individual features to create boots that meet the special needs of our wearers. If you re in the mining industry or working in really tough environments there s our rubber soled extra spec SP-R series. If you need good ankle support but, like many trades dealing with the general public, you need to take your boots on and off often there s ZipSiders our SP-Z Series. SP-P Series is based around our original premium styles and contain many Mongrel favourites. SP-S is our lightweight Sport series with aluminium safety cap and advanced tri-colour sports technology. And if you want a basic safety boot with value for money leather uppers in rugged hide you ll like our Trade range SP-T Series. And if you don t need steel toe caps there is SP-N our non safety protective range. TPU PU/Rubber Thermoplastic polyurethane provides better grip, comfort, flexibility and wear resistance. It s not only lighter and tougher, it also has a longer shelf life. Matched with our ToughSider sole designs it provides a formidable series of benefits for our wearers. Our SP-R range has been designed to take on the toughest conditions but not at the expense of comfort. A new lightweight and flexible polyurethane midsole has been fused with a long wearing nitrile rubber outsole. The sole features a heavy duty 6mm deep tread pattern and is heat resistant up to 300 C. And we ve matched a whole new range of innersoles under the brand name OrthoTec. Now OrthoTec combined with choice on Mongrels SP Series will result in the perfect for you, your feet and the job you do. New comfort breakthrough OrthoTec innersoles New Boots built on sound, high spec foundations As with any worthwhile job the key is to create sound foundations. Each of our six specialist styles feature key comfort and safety breakthroughs that are common across the all occupations. Adding to the basic foundation of our trademark AirZone sole design is a new range of three specific innersole designs under the brand name OrthoTec. The OrthoTec range has been matched to the SP Series into which they are included. The styles are called OrthoTec PU, OrthoTec Gel and OrthoTec Air. Each OrthoTec innersole style is constructed using an open-cell foam material which with specific computer aided design allows air to circulate around the foot, keeping the wearers feet cooler and drier. Moisture reduction means less odour and harmful fungus and bacteria. Roller Sole technology Mongrels Roller Sole technology is featured in all SP Series styles. This computer aided design feature results in a specially shaped sole that creates a roller action when walking. This roller action increases comfort and safety by making the action of walking far smoother thus lessening fatigue. ToughSider sole protection Mongrels ToughSider sole design principles have been applied to create soles to match each of our SP Series ranges. The balance between lightness in the case of SP-S and longevity in tough conditions that will need to met by our SP-R range have been computed to create soles with a unique ability to promote both comfort and durability. AirZone Comfort System AirZone technology is a highly effective element of sole design and features in all SP Series ranges. The system uses air trapped in the cavity of the heel to significantly reduce the degenerative effects of heel strike. The shock absorber effect of AirZone increases comfort which is a safety feature for workers as it reduces tiredness. PU Gel PU Air Our PU innersole features a thick soft structure matched to a design featuring interconnected air holes that assist the open-cell foam to circulate air throughout the boot while creating extra absorbency. This style features in most of the SP Series range The lighter weight of our SP-S range which has been designed using sports technology including tri-coloured soles has been matched with a special PU Gel innersole. This innersole features a cradle to maintain the innersole integrity and a Gel pad in the heel for extra shock absorbency. Our value for money trade range SP-T features OrthoTec open foam PU in a deceptively simple but long wearingand comfortable design. The air blown PU assists in air circulation and moisture control. The nature of its construction also means that the innersole will maintain its shape and not flatten out significantly even over time.
Mongrel SP Premium Mongrel SP Premium TPU/PU dua l density Toug hsider sole better grip, for flexibility an d wear resist ance The origins of our SP range are found in this variety of styles featuring premium grade leather uppers in lace-up, elastic sided and slip on styles they feature OrthoTech PU innersoles and are suitable for a wide variety of working environments where comfort, reliable grip and functionality are required. Our SP-P range also provides styles and fittings specifically suitable for women in the workforce who require safety work boots. >ToughSider dual density sole for extra shock absorbency >Proven AirZone comfort system > with inter-connected air holes for cool, comfortable feet >Roller sole technology for ease of movement > >Premium quality leather uppers >Original SP comfort and safety >Suitable for a wide variety of work environments >Selected Women s fittings available >Specialised Freezer Boot with Thinsulate+ insulation one of the lightest most effective insulation materials available keeps feet warm and dry while allowing sweat to evaporate. 210025 Black Derby Shoe 260020 Black Lace-up Boot Padded collar Padded collar 290080 Black Hiker Shoe 260050 Olive Lace- Up Boot Speed lacing D rings 240030 Claret Kip Elastic 240020 Black Kip Elastic 260030 Claret Kip Lace-up Boot 250ICE Claret Kip Freezer Boot Speed lacing D rings Thinsulate+ insulation Speed lacing D rings, Sizes 3-14 (full sizes only) + Registered trademark of 3M
Mongrel SP Rubber Mongrel SP Rubber New ToughSider PU midsole with Nitrile Rubber outside 580070 Tan Hiker padded tongue and collar 550050 Wheat High Leg padded tongue and collar 545030 Oil Kip Elastic Side padded tongue and collar 580080 Black Hiker padded tongue and collar 550020 Black High Leg OrthoTec Pu innersole padded tongue and collar The Mongrels SP-R or Rubber soled range is a high-tech workboot that s built to take the heat no matter how rugged the conditions. It features a new light and flexible polyurethane midsole with a nitrile rubber outer sole and heavy duty 6mm tread pattern. Matched with our new Orthotec Gel innersole Mongrels is designed for industries such as mining or heavy construction. > New light and flexible Polyurethane midsole with a nitrile rubber outsole and heavy duty 6mm deep tread pattern > Heat resistant up to 300º > New Toughsider III dual density sole for extra shock absorbency > Proven AirZone comfort system > New PU footbed with inter-connected air-holes for cool comfortable feet > Roller sole technology for ease of movement > Moulded PU scuff cap > 565030 Oil Kip Lace Up Heat resistant to 300C padded tongue and collar 550030 Oil Kip High Leg Heat resistant to 300C padded tongue and collar
Mongrel SP Sport Mongrel SP Sport New Tri-Colou r TPU/PU To ughsider Sol e 310025 Black Sports Shoe Sizes 3-13 (6.5 10.5) Many occupations require all the advantages of SP safety without the need to meet harsh treatment. Indeed light weight can be critical in some work situations. Our SP Sport range provides a long wearing but lighter weight combination of aluminium toecap and tri-colour TPU sole. It is further enhanced with our OrthoTec Gel innersole. > New tri-colour TPU/PU sole for extra grip > New ToughSider dual density sole for extra shock absorbency > New lightweight, padded aluminium toe cap for maximum safety and comfort > Proven AirZone comfort system > New two density PU Gel footbed with interconnected air-holes for cool comfortable feet > Roller sole technology for ease of movement 310030 Brown Sports Shoe 315075 Brown Slip On Shoe Sizes 3-13 (6.5 10.5) 315085 Black Slip On Shoe 330080 Black Jogger Shoe Sizes 3-13 (6.5 10.5) 350080 Black Sports Shoe 380070 Rust Hiker Boot 380080 Black/Grey Hiker Boot 390080 Black/Grey Hiker Shoe Sizes 3-13 (6.5 10.5)
Mongrel SP ZipSiders Mongrel SP ZipSiders TPU/PU dual density ToughSider sole for better grip, flexibility and wear resistance 261020 Black Kip Boot 251020 Black Highleg Boot 261050 Wheat Boot 251050 Wheat Highleg Boot Originally designed to meet the needs of tradesman requiring a boot that was easy to slip on and off but provided greater ankle support increasingly required on many worksites. The range has been redesigned and new styles included as a result of demands in specific industries in particular construction. Z styles feature the. >Easy on.. easy of ZipSider styling >ToughSider dual density sole for extra shock absorbency >Proven AirZone comfort system > with inter-connected air-holes for cool, comfortable feet >Roller sole technology for ease of movement > >Premium quality leather uppers
Mongrel SP Trade Mongrel SP Trade TPU/PU dual density ToughSider sole for better grip, flexibility and wear resistance 240011 Black Elastic EVA innersole 220080 Black Hiker Shoe 240040 Wheat Elastic 230080 Black Hiker Boot 240090 Tan Kip Elastic 260010 Black Boot Our Trade range provides a combination of premium SP features along with economical rugged leather uppers designed to meet the most common trade environments. They feature our Orthotec PU Airt innersole and provide value for money without sacrificing safety or comfort. >ToughSider dual density sole for extra shock absorbency >Proven AirZone comfort system > that is highly resistant to flattening >Roller sole technology for ease of movement > >Rugged leather uppers >Traditional SP comfort and safety
Mongrel SP Non-Safety Range Mongrel SP Non-Safety Range TPU/PU dual density ToughSider sole for better grip, flexibility and wear resistance 910025 Black Derby Shoe OrthoTec PU AIR innersole Padded collar 916030 Brown Kip Elastic Sizes 5-14 (6.5-10) 915025 Black Slip on Shoe Padded collar 916020 Black Kip Elastic Sizes 5-14 (6.5-10) 916040 Wheat Elastic 917030 Claret Kip Lace-up Boot Speed lacing D rings 951020 Black Highleg Boot 961020 Black Kip Boot Not everyone requires a steel toe cap. So Mongrels has provided a number of styles featuring all the best of SP design and comfort without the metal cap. The range includes everything from riding boots to classic elastic sided designs. Including our Orthotec Comfort innersole and with sole constructions and materials to match the design -they re suitable for executives to landowners and a whole range of workers in between. > with inter-connected air holes for cool, comfortable feet >Roller sole technology for ease of movement >Premium quality leather uppers >Original SP comfort and safety >Suitable for a wide variety of work environments where steel caps are not required >Riding Boots with traditional look soles in TPU/PU for longer wear and comfort Foot-bed Fibreglass shank PU TPU 805025 Black Riding Boot TPU/PU sole Rigid instep shank for horse riding Sizes 4-13 805070 Brown Riding Boot TPU/PU sole Rigid instep shank for horse riding Sizes 4-13)