HYDROWALL SATIN Super concealing, satin, water-based acrylic enamel paint for interior walls and extremely stain repellent. The product is characterized by a special kind of paint film mildew resistant. Complies with HACCP standards and CE 852/2004 reg. Suitable for environments with food such as cold stores according to UNI 11021:2002. Product certificate with test reports n.252/l of 10/07/2010 - n. 365/L of 07/29/2016. Special additives prevent mould growth. Hydrowall meets the needs of those working in the field of food processing. Its formulation is designed to provide all the criteria of hygiene and safety required by HACCP system. Classified by UNI:EN 13300:2002 Colours Packaging White and Colour chart Base S.S.C. 1 4-10 litres Product characteristics Composition Mean specific weight Based on special acrylic resins and fines pigments in water dispersion. 1,150-1,250 kg/l. Percentage of dry residue of the mix by volume 41% +/- 1. Drying Time Recoatable Resa Coverage Filling Dry: 2-4 hours. After 6-8 ore. 14-16 sqm/l per coat. Optimal. Good. Film Aspect Satin (30-40 Gloss - Glossmeter 60 ). 1/4
Film thickness 75 micron wet- 55 micron dryed, after 2 coats. Thermal conditions of application: Air Temperature: 5-35 C. Product Temperature: 10-30 C. Relative Humidity : max 85%. Do not apply under adverse weather conditions. If the product is applied in enclosed areas, a continuous supply of air is required, so that the escaping water vapour does not condense on the surface. Resistance To wet abrasion Excellent, more than 35.000 Gardner cycles (ASTM 2486). Classification: Water-based painting for interiors UNI:EN 13300:2002 Test Wet Scrub Resistance Grit Brilliance Result (Ldft)=3.61 micron after 200 brushing cycles Classe 1 Thin Medium Brightness (reflectance between 10 and 60 with a geometry of 60 ) Coverage power Class 1 Opacity with a yeld of 5.3 m 2 /lt = 99.54% +/- 1.39%. Resistance to athmospheric agents Good Water resistance Other properties The product completes the drying and polymerization process after 7 10 days by the application under optimal conditions. Non-yellowing. - Odourless. - Excellent elasticity. - Highly washable. - Easy to apply. - Low dirt attraction - Mildew resistant-paint film -Stain repellent Storage In tightly sealed cans, protected from frost. Under a temperature between +5 and +30 C. Results of the Certification Reports by GFC (n 252/L of 10.07.2010 - n. 365/L of 07/29/2016) 2/4
The product "HYDROWALL SATIN" is suitable for painting in food environments and can be used for walls, ceilings and for all surfaces which require resistance to mildew. The product can be washed with an alkaline degreasing agent. The product is suitable for cold stores. Instructions for use Use To paint wall surfaces. Hydrowall creates a protective shield against stains. Its composition makes easy and effective all cleaning operations over time, to always ensure clean walls. Substance 5 minutes 1 hour Thè Removed Removed Cola based drinks Removed Removed Fruit juice* Removed Removed Soy sauce Removed Removed Ketchup Removed Removed Mayonnaise Removed Removed Children pencils* Removed Removed Red Wine** Removed Slightly visible Coffee** Removed Slightly visible Chocolate creams Removed Removed Oil Removed Removed Spreading creams Removed Removed Milk Removed Removed Bath foam/soaps Removed Removed Tomato Removed Removed * Stains caused by some markers and fruit juices may not be completely removed. ** Coffee and red wine are very difficult to remove, take action shortly to remove the stain. The stain may remain slightly visible depending on the color. Warnings: Stains should be removed in accordance with the times stated. Use a soft sponge on the surface to be smudged avoiding the use of abrasive wipes, aggressive detergents, alcohol or solvents. Use neutral detergents suitably diluted with water. Application method Brush or short haired roller or spray. Dilution From 10 to 15% by volume with water for the white color and lite colors. To realize other colors, apply the first and the second coat undiluted or maximum 5% by volume with water. 3/4
Cleaning of equipment With water immediately after use. Application systems A) New Walls: - Apply one brush coat of Isolante Acrilico, diluted 400% by volume with water - Apply two coats of Hydrowall Mat, diluted as indicated over. B) Old Walls: - Sand thoroughly, removing any old coats of loose paint - In case of chalking substrates, apply one brush coat of white Ancoral PLS, diluted 40-60% by volume with with Diluente Sintetico 914090L. - Apply one brush coat of or highly washable products diluted as indications of technical sheet. Notes For surfaces coated with tempera paints or breathable paints, it is recommended that the coating be completely removed. Apply the product Igienix in presence of mould, as indication of technical sheet. Product specification Super concealing, opaque, water-based acrylic enamel paint for interior walls (type:hydrowall Satin) and extremely stain repellent. Characterized by a special kind of mildew resistant- film. Complies with HACCP standards and CE 852/2004 reg. Suitable for environments with food such as cold stores according to UNI 11021:2002. Product certificate by GFC Chemical with test reports n.252/l of 10/07/2010 - n. 365/L of 07/29/2016. Classified by UNI:EN 13300:2002 Film aspect: Satin (30 40 Gloss-Glossmeter 60 ). Film thickness : 75 micron wet- 55 micron dryed, after 2 coats. Drying Time: Dry: 2-4 hours. Wet abrasion resistance Excelent, More than 35.000 Gardner cycles (ASTM 2486). Percentage of dry residue of the mix by volume 41% +/- 1. Mean specific weight 1,150-1,250 kg/l. 4/4
Coverage Power Class 1 All technical information contained herein is indicative. For more detailed information, please consult our TECHNICAL SERVICE DEPARTMENT 5/4