MAGNETIC PRODUCTS DATA SHEET Supersedes data of 1997 Nov 21 File under Magnetic Products, MA1 1999 Jan 18
CORE SETS Effective core parameters SYMBOL PARAMETER VALUE UNIT Σ(I/A) core factor (C1).81 mm 1 V e effective volume 81 mm 3 I e effective length 25.6 mm A e effective area 32. mm 2 A min minimum area 23.8 mm 2 m mass of set 4.5 g handbook, halfpage 7.4 2.9.4 1.35 ±.2 2.3 M1.7 17.9.7 6.4.2 3,,, +.1,,,,,,,,, 12.4 +.5 14.7.6 8 +.4 12.4 ±.1 CBW128 Fig.1 core set. Core sets for filter applications Clamping force 4 ±2 N. GRADE A L (nh) µ e AIR GAP (µm) (WITH NUT) (WITHOUT NUT) 4C6 25 ±3% 16 25-4C6-E25/N -4C6-E25 4 ±3% 26 1-4C6-E4/N -4C6-E4 63 ±3% 41 4-4C6-E63/N -4C6-E63 15 ±25% 97-4C6 3D3 4 ±3% 26 12-3D3-E4/N -3D3-E4 63 ±3% 41 7-3D3-E63/N -3D3-E63 1 ±3% 65 4-3D3-E1/N -3D3-E1 16 ±3% 13 2-3D3-A16/N -3D3-A16 1 ±25% 65-3D3 3H3 16 ±3% 13 23-3H3-A16/N -3H3-A16 25 ±3% 161 11-3H3-A25/N -3H3-A25 315 ±3% 23 9-3H3-A315/N -3H3-A315 4 ±3% 258 7-3H3-A4/N -3H3-A4 22 ±25% 142-3H3 1999 Jan 18 2
GRADE A L (nh) µ e AIR GAP (µm) (WITH NUT) (WITHOUT NUT) 3H1 16 ±3% 13 23-3H1-A16/N -3H1-A16 25 ±3% 161 11-3H1-A25/N -3H1-A25 315 ±3% 23 9-3H1-A315/N -3H1-A315 4 ±3% 258 7-3H1-A4/N -3H1-A4 63 ±5% 46 5-3H1-A63/N -3H1-A63 1 ±1% 65 25-3H1-A1/N -3H1-A1 125 ±1% 85 2-3H1-A125/N -3H1-A125 245 ±25% 158-3H1 3B7 1 ±3% 63 49-3B7-E1/N -3B7-E1 16 ±3% 13 23-3B7-A16/N -3B7-A16 25 ±3% 161 11-3B7-A25/N -3B7-A25 315 ±3% 23 9-3B7-A315/N -3B7-A315 4 ±3% 258 7-3B7-A4/N -3B7-A4 27 ±25% 174-3B7 1999 Jan 18 3
INDUCTANCE ADJUSTER General data handbook, halfpage O 3.13.7 PARAMETER SPECIFICATION Material of head and thread Maximum operating temperature polypropylene (PP), glass fibre reinforced 125 C 9.5 4.5 M 1.7.7 2.4 min MGC79 Fig.2 inductance adjuster. Inductance adjuster selection chart GRADE A L (nh) TYPES FOR LOW ADJUSTMENT Note 1. Maximum adjustment range. L/L (1) % TYPES FOR MEDIUM ADJUSTMENT L/L (1) % TYPES FOR HIGH ADJUSTMENT 3H1; 3H3; 4 ADJ-RM6-GREEN 2 3B7 63 ADJ-RM6-GREEN 14 ADJ-RM6-RED 22 1 ADJ-RM6-GREEN 1 ADJ-RM6-RED 16 16 ADJ-RM6-GREEN 6 ADJ-RM6-RED 1 ADJ-RM6-WHITE 19 2 ADJ-RM6-RED 8 ADJ-RM6-WHITE 15 ADJ-RM6-VIOLET 18 25 ADJ-RM6-WHITE 12 ADJ-RM6-VIOLET 14 ADJ-RM6-BROWN 2 315 ADJ-RM6-WHITE 9 ADJ-RM6-BROWN 15 ADJ-RM6-BLACK 22 4 ADJ-RM6-VIOLET 8 ADJ-RM6-BLACK 16 ADJ-RM6-GREY 3 63 ADJ-RM6-BLACK 9 ADJ-RM6-GREY 15 1 ADJ-RM6-BLACK 5 ADJ-RM6-GREY 8 125 ADJ-RM6-GREY 5 3D3 4 ADJ-RM6-GREEN 2 63 ADJ-RM6-GREEN 14 ADJ-RM6-RED 23 1 ADJ-RM6-GREEN 9 ADJ-RM6-RED 16 ADJ-RM6-WHITE 28 16 ADJ-RM6-RED 1 ADJ-RM6-WHITE 17 4C6 25 ADJ-RM6-GREEN 2 4 ADJ-RM6-GREEN 14 ADJ-RM6-RED 2 63 ADJ-RM6-GREEN 8 ADJ-RM6-RED 12 L/L (1) % 1999 Jan 18 4
COIL FORMERS General data PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with UL 94V- ; UL file number E167521(M) Pin material copper-tin alloy (CuSn), tin-lead alloy (SnPb) plated Maximum operating temperature 18 C, IEC 685 class H Resistance to soldering heat IEC 668-2-2, Part 2, Test Tb, method 1B, 35 C, 3.5 s Solderability IEC 668-2-2, Part 2, Test Ta, method 1 handbook, full pagewidth 12.7 7.62 1.6 7.8.15.8.1 (6.4 min).4.75 O.6 2.54.5 2 3 6.5.15 1 O 12.3.2 O 7.45.2 4 5.7 max 1.4 min 8.6.4 5.2 1.15 MGC8 Fig.3 coil former; 4-pins. Winding data for 4-pins coil former NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED AVERAGE LENGTH OF TURN (mm) WINDING AREA (mm 2 ) WINDING WIDTH (mm) 1 4 all 3 15 6.4 CSV-RM6S/R-1S-4P 2 4 all 3 2 7. 2 3. CSV-RM6S/R-2S-4P 1999 Jan 18 5
handbook, full pagewidth 12.7 7.62 1.6 7.8.15 (6.4 min).8.1 2.54.5 3.7 min.4.75 O.6 4 5 6.5.15 12.3.2 O 7.45.2 2 5.7 max 1 6 8.6.4 5.2 1.15 MGC81 Fig.4 coil former; 6-pins. Winding data for 6-pins coil former NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED AVERAGE LENGTH OF TURN (mm) WINDING AREA (mm 2 ) WINDING WIDTH (mm) 1 6 all 3 15 6.4 CSV--1S-6P 2 6 all 3 2 7. 2 3. CSV--2S-6P MOUNTING PARTS General data handbook, halfpage 2.3 1.6 ITEM SPECIFICATION Clamping force 2 N Clip material steel Clip plating silver (Ag) Solderability IEC 668-2-2, Part 2, Test Ta, method 1 12 9.8 Type number CLI/P-RM6.7 4.5 MGC82 Fig.5 Mounting clip for. 1999 Jan 18 6
DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype Design-in Preferred Support These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 1999 Jan 18 7
a worldwide company Australia: Philips Components Pty Ltd., NORTH RYDE, Tel. +61 2 985 4455, Fax. +61 2 985 4466 Austria: Österreichische Philips Industrie GmbH, WIEN, Tel. +43 1 6 11 12 41, Fax. +43 1 6 11 12 11 Belarus: Philips Office Belarus, MINSK, Tel. +375 172 2 924/733, Fax. +375 172 2 773 Benelux: Philips Nederland B.V., EINDHOVEN, NL, Tel. +31 4 2783 749, Fax. +31 4 2788 399 Brazil: Philips Components, SÃO PAULO, Tel. +55 11 821 2333, Fax. +55 11 829 1849 Canada: Philips Electronics Ltd., SCARBOROUGH, Tel. +1 416 292 5161, Fax. +1 416 754 6248 China: Philips Company, SHANGHAI, Tel. +86 21 6354 188, Fax. +86 21 6354 16 Denmark: Philips Components A/S, COPENHAGEN V, Tel. +45 3329 3333, Fax. +45 3329 395 Finland: Philips Components, ESPOO, Tel. +358 9 615 8, Fax. +358 9 615 851 France: Philips Composants, SURESNES, Tel. +33 1 499 6161, Fax. +33 1 499 6493 Germany: Philips Components GmbH, HAMBURG, Tel. +49 4 2489-, Fax. +49 4 2489 14 Greece: Philips Hellas S.A., TAVROS, Tel. +3 1 4894 339/+3 1 4894 239, Fax. +3 1 4814 24 Hong Kong: Philips Hong Kong, KOWLOON, Tel. +852 2784 3, Fax. +852 2784 33 India: Philips India Ltd., MUMBAI, Tel. +91 22 493 311, Fax. +91 22 493 966/495 34 Indonesia: P.T. Philips Development Corp., JAKARTA, Tel. +62 21 794 4, Fax. +62 21 794 8 Ireland: Philips Electronics (Ireland) Ltd., DUBLIN, Tel. +353 1 764 23, Fax. +353 1 764 21 Israel: Rapac Electronics Ltd., TEL AVIV, Tel. +972 3 645 444, Fax. +972 3 6491 7 Italy: Philips Components S.r.l., MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557 Japan: Philips Japan Ltd., TOKYO, Tel. +81 3 374 5135, Fax. +81 3 374 535 Korea (Republic of): Philips Electronics (Korea) Ltd., SEOUL, Tel. +82 2 79 1472, Fax. +82 2 79 148 Malaysia: Philips Malaysia SDN Berhad, Components Division, PULAU PINANG, Tel. +6 3 75 5213, Fax. +6 3 757 488 Mexico: Philips Components, EL PASO, U.S.A., Tel. +52 915 772 42, Fax. +52 915 772 4332 New Zealand: Philips New Zealand Ltd., AUCKLAND, Tel. +64 9 815 4, Fax. +64 9 849 7811 Norway: Norsk A/S Philips, OSLO, Tel. +47 22 74 8, Fax. +47 22 74 8341 Pakistan: Philips Electrical Industries of Pakistan Ltd., KARACHI, Tel. +92 21 587 4641-49, Fax. +92 21 577 35/+92 21 587 4546 Philippines: Philips Semiconductors Philippines Inc., METRO MANILA, Tel. +63 2 816 6345, Fax. +63 2 817 3474 Poland: Philips Poland Sp. z.o.o., WARSZAWA, Tel. +48 22 612 2594, Fax. +48 22 612 2327 Portugal: Philips Portuguesa S.A., Philips Components: LINDA-A-VELHA, Tel. +351 1 416 316/416 3333, Fax. +351 1 416 3174/416 3366 Russia: Philips Russia, MOSCOW, Tel. +7 95 755 6918, Fax. +7 95 755 6919 Singapore: Philips Singapore Pte Ltd., SINGAPORE, Tel. +65 35 2, Fax. +65 355 1758 South Africa: S.A. Philips Pty Ltd., JOHANNESBURG, Tel. +27 11 47 5911, Fax. +27 11 47 5494 Spain: Philips Components, BARCELONA, Tel. +34 93 31 63 12, Fax. +34 93 31 42 43 Sweden: Philips Components AB, STOCKHOLM, Tel. +46 8 5985 2, Fax. +46 8 5985 2745 Switzerland: Philips Components AG, ZÜRICH, Tel. +41 1 488 22 11, Fax. +41 1 481 773 Taiwan: Philips Taiwan Ltd., TAIPEI, Tel. +886 2 2134 29, Fax. +886 2 2134 2929 Thailand: Philips Electronics (Thailand) Ltd., BANGKOK, Tel. +66 2 745 49, Fax. +66 2 398 793 Turkey: Türk Philips Ticaret A.S., GÜLTEPE/ISTANBUL, Tel. +9 212 279 277, Fax. +9 212 282 677 United Kingdom: Philips Components Ltd., DORKING, Tel. +44 136 512, Fax. +44 136 512 345 United States: Display Components, ANN ARBOR, MI, Tel. +1 734 996 94, Fax. +1 734 761 2776 Magnetic Products, SAUGERTIES, NY, Tel. +1 914 246 2811, Fax. +1 914 246 487 Passive Components, SAN JOSE, CA, Tel. +1 48 57 56, Fax. +1 48 57 57 Yugoslavia (Federal Republic of): Philips Components, BELGRADE, Tel. +381 11 625 344/373, Fax. +381 11 635 777 Internet: Display Components: www.dc.comp.philips.com Passive Components: www.passives.comp.philips.com For all other countries apply to: Philips Components, Building BF-1, P.O. Box 218, 56 MD EINDHOVEN, The Netherlands, Fax. +31-4-27 23 93. COD21 Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands