MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Material name Revision date Version # 01 CAS # Mixture MSDS Number VEL-110 Product use Decontamination/Cleaning Agent. Manufacturer/Supplier Veltek Associates, Inc. 15 Lee Blvd MALVERN, PA USA vai@sterile.com Contact Person: All questions regarding chemical content should be directed to CARECHEM 24 Telephone: Emergency CARECHEM 24: Hazards Identification Physical state Appearance Emergency overview Liquid. Clear, colorless to straw-colored liquid. DANGER! Harmful if swallowed. Causes eye burns. Causes skin burns. OSHA regulatory status This product is hazardous according to OSHA 29 CFR Potential health effects Routes of exposure Eye contact. Ingestion. Inhalation. Skin contact. Eyes Causes eye burns. Prolonged contact causes serious eye and tissue damage. Skin Causes skin burns. May cause serious chemical burns to the skin. Inhalation In high concentrations, vapors may be irritating to the respiratory system. Ingestion Harmful if swallowed. Ingestion may produce burns to the lips, oral cavity, upper airway, esophagus and possibly the digestive tract. Target organs Eyes. Skin. Respiratory system. Gastro-intestinal tract. Chronic effects Prolonged skin contact may cause dermatitis. Signs and symptoms Extreme irritation of eyes and mucous membranes, including burning and tearing. May cause burns in mucous membranes, throat, esophagus and stomach. May cause serious chemical burns to the skin. Potential environmental effects The product contains a substance which is very toxic to aquatic organisms. 3. Composition / Information on Ingredients Components CAS # Percent Didecyldimethylammon ium chloride Alkyl(C12-16)dimethy lbenzylammonium chloride Alcohols, C9-11, ethoxylated EDTA, Sodium salt Citric acid <1 Composition comments All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. 1 / 6

2 4. First Aid Measures First aid procedures Eye contact Skin contact Inhalation Ingestion tes to physician General advice Flush thoroughly with water for at least 15 minutes. Get immediate medical assistance. If medical assistance is not immediately available, flush an additional 15 minutes. Make sure to remove any contact lenses from the eyes before rinsing. Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention immediately! Chemical burns must be treated by a physician. Move injured person into fresh air and keep person calm under observation. Get medical attention if any discomfort occurs. Rinse mouth thoroughly with water and give large amounts of milk or water to people not unconscious. Do not induce vomiting. If vomiting occurs, the head should be kept low so that stomach vomit doesn't enter the lungs. Obtain medical attention and take along these instructions. Treat symptomatically. Symptoms may be delayed. Chemical burns must be treated by a physician. 5. Fire Fighting Measures Flammable properties Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Protection of firefighters Specific hazards arising from the chemical Protective equipment and precautions for firefighters Fire fighting equipment/instructions The product is not flammable. Use fire-extinguishing media appropriate for surrounding materials. ne known. During fire, gases hazardous to health may be formed. Thermal decomposition products are toxic and corrosive. Selection of respiratory protection for firefighting: follow the general fire precautions indicated in the workplace. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Move containers from fire area if you can do it without risk. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. 6. Accidental Release Measures Personal precautions Environmental precautions Methods for containment Methods for cleaning up Other information Ensure adequate ventilation. Avoid inhalation of vapors/spray and contact with skin and eyes. Wear suitable protective clothing. See Section of the MSDS for Personal Protective Equipment. Do not allow to enter drains, sewers or watercourses. Collect and dispose of spillage as indicated in Section 13 of the MSDS. Contact local authorities in case of spillage to drain/aquatic environment. Collect spillage. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Clean up in accordance with all applicable regulations. Clean up in accordance with all applicable regulations. 7. Handling and Storage Handling Storage Provide adequate ventilation. Avoid inhalation of vapors/mist and contact with skin and eyes. Wear appropriate personal protective equipment. Handle and open container with care. Change contaminated clothing. Wash contaminated clothing before reuse. Observe good industrial hygiene practices. Keep container tightly closed and in a well-ventilated place. Store away from incompatible materials.. Exposure Controls / Personal Protection Occupational exposure limits Engineering controls Personal protective equipment Eye / face protection exposure limits noted for ingredient(s). Provide adequate ventilation and minimize the risk of inhalation of vapors. Shower, hand and eye washing facilities near the workplace are recommended. Use approved safety goggles or face shield. 2 / 6

3 Skin protection Respiratory protection General hygiene considerations Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier. Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapor contact. In case of inadequate ventilation: Use a NIOSH/MSHA approved air purifying respirator as needed to control exposure. Consult with respirator manufacturer to determine respirator selection, use, and limitations. Use positive pressure, air-supplied respirator for uncontrolled releases or when air purifying respirator limitations may be exceeded. Follow respirator protection program requirements (OSHA and ANSI Z.2) for all respirator use. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. 9. Physical & Chemical Properties Appearance Clear, colorless to straw-colored liquid. Color Colorless to straw. Odor Organic. Odor threshold Physical state Liquid. Form Liquid. ph 7.31 Melting point Freezing point Boiling point Flash point > 221 F (> 105 C) Tag Closed Cup Evaporation rate Flammability limits in air, upper, % by volume Flammability limits in air, lower, % by volume Vapor pressure Vapor density Specific gravity (water=1) Solubility (water) Partition coefficient (n-octanol/water) Auto-ignition temperature Decomposition temperature VOC 20 % Approx. Viscosity 13.6 mm2/s Viscosity temperature 71.6 F (22 C) Bulk density.35 lb/gal 10. Chemical Stability & Reactivity Information Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products Possibility of hazardous reactions Material is stable under normal conditions. Elevated temperatures. Freezing. Strong oxidizing agents. Reducing agents. Carbon oxides. Nitrogen Oxides. Hydrogen chloride gas. Hazardous polymerization does not occur. 3 / 6

4 11. Toxicological Information Toxicological data Components EDTA, Sodium salt (64-02-) Toxicological information Acute effects Local effects Sensitization Chronic effects Carcinogenicity Epidemiology Mutagenicity Reproductive effects Symptoms and target organs Further information Test Results Acute Dermal LD50 Rabbit: > 2000 mg/kg Acute Oral LD50 Rat: > 2000 mg/kg The information in this section is for the individual ingredients that are expected to contribute to the potential health effects of this product. Harmful if swallowed. May cause burns of the gastrointestinal tract if swallowed. Contact with this material will cause burns to the skin, eyes and mucous membranes. In high concentrations, vapors may be irritating to the respiratory system. Prolonged skin contact may cause dermatitis. Corrosive effects. Prolonged contact causes serious eye and tissue damage. May cause serious chemical burns to the skin. Prolonged skin contact may cause dermatitis. 12. Ecological Information Ecotoxicological data Components EDTA, Sodium salt (64-02-) Ecotoxicity Persistence and degradability Bioaccumulation / Accumulation Partition coefficient (n-octanol/water) Mobility in environmental media Test Results EC50 Water flea (Daphnia magna): > 100 mg/l 4 hours LC50 Leuciscus idus: > 500 mg/l 96 hours The product contains a substance which is very toxic to aquatic organisms. The product is water soluble and may spread in water systems. 13. Disposal Considerations Disposal instructions Waste from residues / unused products Contaminated packaging 14. Transport Information Dispose of this material and its container at hazardous or special waste collection point. Do not reuse container. Do not allow this material to drain into sewers/water supplies. Dispose in accordance with all applicable regulations. Dispose of in accordance with local regulations. Since emptied containers retain product residue, follow label warnings even after container is emptied. Dispose of in accordance with local regulations. Read safety instructions, MSDS and emergency procedures before handling. DOT UN1903 Proper shipping name Disinfectants, liquid, corrosive, n.o.s. (Didecyldimethylammonium chloride, 4 / 6

5 Environmental hazards Special precautions Labels required Additional information: Read safety instructions, MSDS and emergency procedures before handling. Special provisions A6, A7, B10, T14, TP2, TP27 Packaging exceptions ne Packaging non bulk 201 Packaging bulk 243 IATA 1903 Proper shipping name Disinfectant, liquid, corrosive, n.o.s. (Didecyldimethylammonium chloride, Environmental hazards Special precautions Read safety instructions, MSDS and emergency procedures before handling. Additional information: ERG code L IMDG 1903 Proper shipping name DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (Didecyldimethylammonium chloride, Environmental hazards EmS. F-A, S-B Special precautions Read safety instructions, MSDS and emergency procedures before handling. TDG Proper shipping name DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (Didecyldimethylammonium chloride, UN1903 NO Additional information: Special provisions Regulatory Information US federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR TSCA Section 12(b) Export tification(40 CFR 707, Subpt. D) t regulated. CERCLA (Superfund) reportable quantity (lbs) (40 CFR 302.4) ne Superfund Amendments and Reauthorization Act of 196 (SARA) Hazard categories Immediate Hazard - Delayed Hazard - Fire Hazard - Pressure Hazard - Reactivity Hazard - 5 / 6

6 Section 302 extremely hazardous substance (40 CRF 355, Appendix A) Section 311/312 (40 CFR 370) Drug Enforcement Administration (DEA) (21 CFR ) Canadian regulations WHMIS status WHMIS classification WHMIS labeling t controlled This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR. Controlled D1B - Immediate/Serious-TOXIC D2B - Other Toxic Effects-TOXIC E - Corrosive Inventory status Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Domestic Substances List (DSL) Canada n-domestic Substances List (NDSL) China Inventory of Existing Chemical Substances in China (IECSC) Europe European Inventory of Existing Commercial Chemical Substances (EINECS) Europe European List of tified Chemical Substances (ELINCS) Japan Inventory of Existing and New Chemical Substances (ENCS) Korea Existing Chemicals List (ECL) New Zealand New Zealand Inventory Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) State regulations Mexico regulations 16. Other Information This product does not contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. This safety data sheet was prepared in accordance with the Official Mexican Standard (NOM-01-STPS-2000). Further information HMIS is a registered trade and service mark of the NPCA. G - Safety Glasses, Gloves, Vapor Respirator HMIS ratings Health: 3 Flammability: 1 Physical hazard: 0 Personal protection: B NFPA ratings Health: 3 Flammability: 1 Instability: 0 Disclaimer This information is provided without warranty. The information is believed to be correct. This information should be used to make an independent determination of the methods to safeguard workers and the environment. Issue date / 6