Material Safety Data Sheet

Transcription

1 CS: Page: 1 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER Product Name Company Name Address Emergency Tel. Telephone/Fax Number Recommended Use Other Names Other FLUFFY FABRIC SOFTENER F1000 (READY TO USE)- LONGER LASTING Colgate-Palmolive Pty Ltd (ABN ) Australia: Level 14, 34 George Street, Sydney NSW 2000 Australia AUS , NZ: Tel: AUS (02) NZ: Fax: AUS (02) , NZ: Fabric stener. Name 2. HAZARDS IDENTIFICATION Hazard Classification Safety Phrase(s) FLUFFY FABRIC SOFTENER RTU - JASMINE FLUFFY FABRIC SOFTENER RTU - SUMMER BREEZE FLUFFY FABRIC SOFTENER RTU - WHITE LAVENDER New Zealand Address: Level 4, 4 Knights Road, Lower Hutt. Product Code NON-HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. Hazard classification according to the criteria NOHSC. Dangerous goods classification according to the Australia Dangerous Goods Code. S2 Avoid contact with eyes. 3. COMPOSITION/INFORMATION ON INGREDIENTS Ingredients 4. FIRST AID MEASURES Inhalation Ingestion Skin Name CAS Proportion Mineral oil 2-Propanol Ammonium chloride Phosphoric acid Phosphorous acid 2-Bromo-2-nitropropane -1,3-diol Butylated hydroxytoluene Propylene glycol Acetic acid Hydrochloric acid -chloro-2-methyl-2h-i sothiazol-3-one and 2-methyl-2H-isothiazol -3-one (3:1) Acrylamide Non hazardous ingredients and water <1 % <1 % <0.01 % <0.01 % <0.01 % <0.01 % <0.01 % 7--6 <0.01 % <0.001 % <0.001 % <0.001 % <0.001 % Balance If inhaled, remove affected person from contaminated area. Keep at rest until recovered. If symptoms persist seek medical attention. Do not induce vomiting. Wash out mouth thoroughly with water. If symptoms develop seek medical attention. (never give anything by mouth if affected person is semi-conscious or unconscious-seek medical attention). Wash affected area thoroughly with soap and water. If symptoms develop seek medical attention. Print Date: 31/10/2012 CS: 1.6.2

2 CS: Page: 2 Eye First Aid Facilities Advice to Doctor Other. FIRE FIGHTING MEASURES Suitable Extinguishing Media Hazards from Combustion Products Specific Hazards Precautions in connection with Fire If in eyes, hold eyelids apart and flush the eyes continuously with running water. Continue flushing for several minutes until all contaminants are washed out completely. If symptoms develop and persist seek medical attention. Eyewash and normal washroom facilities. Treat symptomatically. For advice in an emergency, contact a Poisons Centre (Phone Australia ; New Zealand 0800 POISON / ) or a doctor at once. Use appropriate fire extinguisher for surrounding environment. Non-combustible material Non-combustible material Fire fighters should wear Self-Contained Breathing Apparatus (SCBA) operated in positive pressure mode and full protective clothing to prevent exposure to vapours or fumes. Water spray may be used to cool down heat-exposed containers 6. ACCIDENTAL RELEASE MEASURES Emergency Procedures 7. HANDLING AND STORAGE Precautions for Safe Handling Conditions for Safe Storage Corrosiveness Slippery when spilt. Avoid accidents, clean up immediately. Small spill: Mop up & wash residue to drain with copious amounts water. Large spill: Wear appropriate personal protective equipment and clothing to minimise exposure, since product is acidic. Increase ventilation. If possible contain the spill. Place inert absorbent material onto spillage. Collect the material and place into a suitable labelled container. Do not dilute material but contain. Dispose waste according to the applicable local and national regulations. If contamination sewers or waterways occurs inform the local water and waste management authorities in accordance with local regulations. Industrial applications: Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up mists or vapours in the work atmosphere. Avoid inhalation vapours and mists, and skin or eye contact as product is acidic. Maintain high standards personal hygiene i.e. Washing hands prior to eating, drinking, smoking or using toilet facilities. Store in a cool, dry, well-ventilated area, out direct sunlight. Store in suitable, labelled containers. Keep containers closed when not in use. Avoid contact with incompatible materials such as strong oxidising agents and materials that will react with water. Protect from frost. Not corrosive to metals. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION National Exposure Standards No exposure value assigned for this material by Safe Work, Australia. However, the available exposure limits for ingredients are listed below: Safe Work, Australia Exposure Standards: Substance TWA STEL NOTICES ppm mg/m³ ppm mg/m³ Acetic acid Acrylamide Sk Ammonium chloride Butylated hydroxytoluene Hydrochloric acid 7. (peak limitation) - Isopropanol Mineral oil Orthophosphoric acid Propylene glycol: - particulates vapour and particulates Print Date: 31/10/2012 CS: 1.6.2

3 CS: Page: 3 Biological Limit Values Engineering Controls Respiratory Protection Eye Protection Hand Protection Body Protection TWA (Time Weighted Average): The average airborne concentration a particular substance when calculated over a normal eight-hour working day, for a five-day week. STEL (Short Term Exposure Limit): The average airborne concentration over a 1 minute period which should not be exceeded at any time during a normal eight-hour workday. Peak Limitation: A ceiling concentration which should not be exceeded over a measurement period which should be as short as possible but not exceeding 1 minutes. Ceiling: A concentration that should not be exceeded during any part the working day. 'Sk' Notice: Absorption through the skin may be a significant source exposure. The exposure standard is invalidated if such contact should occur. 'Sen' Notice: The substance may cause sensitisation by skin contact or by inhalation 2-Propanol[ ] Acetone in urine End shift 40 mg/l at end work week No special engineering controls required. Industrial applications: Use with good general ventilation. If mists or vapours are produced, local exhaust ventilation should be used. Not necessary under normal conditions use. Industrial applications: Safety glasses with side shields, goggles or full-face shield as appropriate recommended. Final choice appropriate eye/face protection will vary according to individual circumstances ie. methods handling or engineering controls and according to risk assessments undertaken. Eye protection should conform with Australian/New Zealand Standard AS/NZS Eye Protectors for Industrial Applications. Industrial applications: Wear gloves impervious material conforming to AS/NZS 2161: Occupational protective gloves - Selection, use and maintenance. Final choice appropriate glove type will vary according to individual circumstances. This can include methods handling, and engineering controls as determined by appropriate risk assessments. Industrial applications: Suitable protective clothing should be worn e.g. cotton overalls buttoned at neck and wrist. When large quantities are handled the use plastic aprons and rubber boots is recommended. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odour Melting Point Boiling Point Solubility in Water Specific Gravity ph Value Vapour Pressure Vapour Density (Air=1) Viscosity Colour Flash Point Smooth, free flowing viscous liquid. Soluble cps (2 C) Jasmine: White White Lavender: Light Purple Pink Summer Breeze: Yellow Print Date: 31/10/2012 CS: 1.6.2

4 CS: Page: 4 Flammability Auto-Ignition Temperature Flammable Limits - Lower Flammable Limits - Upper Non-combustible liquid 10. STABILITY AND REACTIVITY Chemical Stability Conditions to Avoid Incompatible Materials Hazardous Decomposition Products Hazardous Polymerization Stable under normal conditions storage and handling. Extremes temperature and direct sunlight. Strong oxidising agents, materials that may react with water. Will not occur. 11. TOXICOLOGICAL INFORMATION Toxicology Inhalation Ingestion Skin Eye Chronic Effects 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence / Degradability Mobility Environ. Protection No toxicity data are available for this material. Inhalation product vapours may cause irritation the nose, throat and respiratory system. Ingestion this product may irritate the gastric tract causing nausea and vomiting. May be irritating to skin. The symptoms may include redness, itching and swelling. May be irritating to eyes. The symptoms may include redness, itching and tearing. Prolonged or repeated skin contact may cause irritation leading to dermatitis. 13. DISPOSAL CONSIDERATIONS Disposal Considerations 14. TRANSPORT INFORMATION Transport Prevent large quantities this material entering the environment. The disposal large quantities spilled or waste material must be done in accordance with applicable local and national regulations. Road and Rail Transport: Australia: Not classified as Dangerous Goods according to the Australian Code for the Transport Dangerous Goods by Road and Rail (ADG Code) (7th edition). Marine Transport (IMO/IMDG): Not classified as Dangerous Goods by the criteria the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea. Air Transport (ICAO/IATA): Not classified as Dangerous Goods by the criteria the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air. Print Date: 31/10/2012 CS: 1.6.2

5 CS: Page: IMDG Marine Pollutant (MP) No 1. REGULATORY INFORMATION Regulatory Poisons Schedule 16. OTHER INFORMATION Date preparation or last revision MSDS Contact Person/Point Not classified as Hazardous according to criteria National Occupational Health & Safety Commission (NOHSC), Australia. Not classified as a Scheduled Poison according to the Standard for the Uniform Scheduling Medicines and Poisons (SUSMP). Not Scheduled MSDS Reviewed: October 2012 Supersedes: March Hr Emergency Response Australia New Zealand End Of MSDS... Copyright ACOHS Pty Ltd Copyright in the source code the HTML, PDF, XML, XFO and any other electronic files rendered by an Infosafe system for Infosafe MSDS displayed is the intellectual property Acohs Pty Ltd. Copyright in the layout, presentation and appearance each Infosafe MSDS displayed is the intellectual property Acohs Pty Ltd. The compilation MSDS's displayed is the intellectual property Acohs Pty Ltd. Copying any MSDS displayed is permitted for personal use only and otherwise is not permitted. In particular the MSDS's displayed cannot be copied for the purpose sale or licence or for inclusion as part a collection MSDS without the express written consent Acohs Pty Ltd. Print Date: 31/10/2012 CS: 1.6.2