TECHNICAL INSTRUCTION

Transcription

1 DSCRIPTION: RFRNC DOCUMNTS. G6-SP-007 Pag. 1 de 8 - IFMA-389 PAINTING AIRCRAFT GNRAL INSTRUCTIONS - IFMA SHTS FOR TH PRPARATION AND APPLICATION OF CONDUCTIV AND ANTISTATIC PAINTS. - IFMA-310 US OF DGRASING PRODUCTS - MP CHROMATING TRATMNT BY ALODIN 1200 ON ALUMINIUM ALLOYS - STL`s: 332A Ind. 332A Ind.C 332A A Ind.A 332A Rev 0 332A Rev 0 - DRAWINGS: 332A AR 332A AM 332A Q 332A AO 332A R 332A U MATRIALS AND QUIPMNT. Thinners, bases, Catalyst and degreasing products: - Diestone - HYSO Alodine BAS 2002/A - CATALYST 2002/B CHO-SHILD THINNR: 2002/C uipment: - Vacuum cleaner and compressed air. - White cotton cloths. - Brush. - Gun. - Scott Brite. - Abrasive paper (grit 400 or 320). - Thermohygrograph Safety equipment: - Protective eyewear - Disposable latex gloves - Mask - Disposable protective clothes

2 DSCRIPTION: G6-SP-007 Pag. 2 de 8 RACTIVATION AND APPLICATION OF CONDUCTIV PAINT DGRASING WITH DISTON SANDING DOWN (using approx.400grade sand DUST RMOVAL RACTIVATION DGRASING WITH HYSO99 DUSTR PAD ALODIN 1132 MASKING VRIFY TH AMBINT CONDITIONS CHCK TH CONDITIONS QUIPMNTS APPLICATION FILL OUT TH APPLICATION RGISTR QUALITY INSPCTION IS TH PAINT ACCORDING TO TH RQUIRD? YS NO STOR

3 DSCRIPTION: G6-SP-007 Pag. 3 de 8 RACTIVATION (of a painted surface) Degreasing/ cleaning with DISTON. Sanding using approx. 320/400 grit abrasive paper. Wiping with an "anti-dust" cloth. After degreasing, protect part by dabbing Alodine Painting operations shall be carried out within

4 DSCRIPTION: G6-SP-007 Pag. 4 de 8 MASKING MATRIAL Protect all surfaces which will be not painted with primer. All metallizations, acrylic windows, tires, etc., must be masked with adhesive tape or stickers to prevent deposition of primer. 332A Painting with CHO-SHILD a rectangle of 10mm per

5 DSCRIPTION: G6-SP-007 Pag. 5 de 8 The following accompanying pieces where conductive paint (CHO-SHILD 2002) is 332A A01 332A A

6 DSCRIPTION: G6-SP-007 Pag. 6 de 8 APPLICATION OF CONDUCTIV PAINT (CHO_SHILD Verify that the ambient conditions for the application of conductive paint in the paint booth are within specified parameters. TMPRATUR: 15ºC~25ºC RLATIV HUMDITY: 40%~ 70% Before the application of CHO_SHILD-2002, check the perfect cleaning of the area of application, and that the application equipment is It s obligatory to wear latex gloves and mask during the application of the painting. Apply the mixture in two coats. Time between coats: 15 minutes Thickness of dry film is μm Aplication is done with nozzle diameter betwen 1.2 mm and 1.6mm, air pressure: 3 to Fill out all data requiered in Application Register CHO_SHILD 2002 is mixed according to the TI G6-SPa) Mixing number b) Date / Time of application start c) Product d) Touch-up e) Paint type f) Relative Humidity g) Temperature h) nd time of aplication i) Time of application start drying j) nd time of application drying k) Drying temperature l) Operators (painter) sign m) Verification of thickness and paint adhesion Quality Requirements after application of the CHO_SHILD 2002: dry coat must be even and of uniform colour, with no surface irregularities such as blistering, pronounced "orange peel", grain, dullness, etc... At 20ºC, for mask (adhesive tape): 24 hours

7 DSCRIPTION: G6-SP-007 Pag. 7 de 8 RQUIRMNTS FOR TRATMNT OF WAST AND PROTCTION QUIPMNT. Utilization of the product standards PRODUCT DISTON HARMFUL FLAMMABL MASK DISPOSABL LATX PROTCTIV YWAR HOW TO US Avoid prolonged contact with skin (use globes) Use mask (semimáscara) with replaceable filter for respiratory protection Use the minimum amount necessary, avoid accumulating rags soaked in the workplace. Because is a flammable liquid must be controled any possible sources of ignition (electrical, sparks with tools, smoke..) MASURS OF HYGIN Wash hands before eating and smoking Do not use for cleaning of stains on the skin FIRST AID INHALATION : Move affected person to breathe clean air, call for medical attention. SKIN : Wash contaminated skin with soap and water. If irritation persists, call for medical attention. YS : Act quickly. Flush eyes with water. call for medical attention immediately. INGSTION : Do not induce vomiting. Whenever the person is conscious give water to drink. If there isn t a fast recovery, call for medical attention. IN CAS OF LAKAG Absorb or prevent the spread of liquid product. Wash contaminated area with water. IN CAS OF FIR Can be used dry chemical powder and / or carbon dioxide. Not suitable water jet. STORAG Keep away from sources of heat or ignition. Do not smoke. WAST TRATMNT Do not throw residues down the drain. COMMNTS Diestone is a solvent that can cause skin irritation on prolonged contact. Its vapors are flammable and inhalation of the same harmful. Keep container correctly closed.

8 DSCRIPTION: G6-SP-007 Pag. 7 de 8 RQUIRMNTS FOR TRATMNT OF WAST AND PROTCTION QUIPMNT. Utilization of the product standards PRODUCT HYSO 99 HARMFUL FLAMMABL MASK DISPOSABL LATX PROTCTIV YWAR HOW TO US Avoid prolonged contact with skin (use globes) Use mask (semimáscara) with replaceable filter for respiratory protection Use the minimum amount necessary, avoid accumulating rags soaked in the workplace. Because is a flammable liquid must be controled any possible sources of ignition (electrical, sparks with tools, smoke..) MASURS OF HYGIN Wash hands before eating and smoking Do not use for cleaning of stains on the skin FIRST AID INHALATION : Move affected person to breathe clean air, call for medical attention. SKIN : Wash contaminated skin with soap and water. If irritation persists, call for medical attention. YS : Act quickly. Flush eyes with water. call for medical attention immediately. INGSTION : Do not induce vomiting. Whenever the person is conscious give water to drink. If there isn t a fast recovery, call for medical attention. IN CAS OF LAKAG Absorb or prevent the spread of liquid product. Wash contaminated area with water. IN CAS OF FIR Can be used dry chemical powder and / or carbon dioxide. Not suitable water jet. STORAG Keep away from sources of heat or ignition. Do not smoke. WAST TRATMNT Do not throw residues down the drain. COMMNTS HYSO 99 is a solvent that can cause skin irritation on prolonged contact. Its vapors are flammable and inhalation of the same harmful. Keep container correctly closed.