An Ink That s Right For Every Job.

Transcription

1 An Ink That s Right For Every Job. NARROW WEB PRINTING INKS Mexico Phone: +52 (55) Nazdar.com

2 Table of Contents Nazdar Narrow Web Catalog Flexo - UV LED Inks... 6 Rotary Screen- UV LED Inks... 9 UV LED Varnishes/Adhesives...10 Flexo - UV Inks...14 Rotary Screen- UV Inks...15 Letterpress/Offset - UV Inks...21 UV Varnishes/Adhesives...23 Flexo - Water Based Inks...38 Water Based Coatings/Adhesives...38 Nazdar Ink Technologies -World Headquarters 8501 Hedge Lane Terrace Shawnee, KS USA Toll Free US: Tel: Customer Service NazdarOrders@nazdar.com Technical Support InkAnwers@Nazdar.com Nazdar EMEA Battersea Road, Heaton Mersey Stockport, England SK4 3EA Tel: + 44 (0) Nazdar Nazdar Asia Pacific 11, Changi North Street 1 #03-03/04 Singapore Tel: aspac@nazdar.com Nazdar Tlalnepantla Gustavo Baz 180 D-4 San Jeronimo Tepetlacalco Tlalnepantla, Edo. de Mexico Mexico Tel: +52 (55) Fax: +52 (55) An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

3 Introduction to Nazdar Inks Nearly 100 Years of Inks & Coatings Innovation Focused on Your Flexographic, Screen and Digital Printing Ink Needs The Nazdar company manufacturers the most comprehensive selection of UV, UV-LED and water-base flexographic inks, screen printing inks, and wide-format digital inks obtainable from a single source. Nazdar inks are primarily used by printers in Roll Label & Packaging, Point of Purchase (POP), Banner, Container, Industrial, Metal, Ad Specialty, Nameplate / Membrane Switch, Sign and Textile decorating markets. Nazdar digital printing inks can be used in a wide selection of digital inkjet printing presses like VUTEk, NUR, Scitex, Mutoh, Océ, Mimaki and Gandi, Hewlett-Packard, Epson, Roland, Agfa, Teckwin and other notable wide-format digital printers. Whether printing indoor or outdoor applications on paper, plastics, textiles, metal, glass, or containers and packaging, there s a Nazdar ink that s right for every job. Nazdar accepts responsibility as a corporate citizen and acknowledges our obligation to help improve the quality of the environment, society, and community of which we are a part. We are committed to formulate all our products with environmental advantages in mind, including more energy efficient UV curing inks that are V-Pyrol free and heavy metal free solvent based inks designed to have lower VOCs and easy reclamation. Nazdar also provides extensive regulatory compliance training to industry associations and printers. Nazdar Shawnee s QMS have received ISO 9001:2015 certification. 3 U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com

4 Nazdar On-Line The continuing evolution of communications technology has brought faster access to product information, service and support for on-line users everywhere, including the screen printing industry. Nazdar was one of the first screen printing ink manufacturers to have a presence on the World Wide Web and continues to remain at the forefront of online services by offering a wealth of information and educational interactive opportunities to our web site s visitors. The Nazdar On-Line web site is a printer s gateway to the latest news and technical information concerning Nazdar s products and services. It s also the best way to keep up with what s happening locally by visiting the special Nazdar branch location web sites within Nazdar On-Line. That s just the beginning. Nazdar On-Line also provides dates and locations for national and regional trade shows and educational seminars, and links to other important on-line printing resources. Nazdar on-line provides an area where printers can download valuable software to assist in color calibration and color matching. Direct links to Nazdar departments such as customer service, technical service, and regulatory compliance provide fast response to any questions concerning Nazdar products. If you ve visited the Nazdar On-Line site in the past, stop by again; we re continually updating and improving our programming and information. We re sure you ll find it both educational and informative. Ink Answers Got ink questions? We have ink answers. The Ink Answers service has become an incredibly useful communication tool for Nazdar s distributors, salesforce and end-users. If you have an ink question InkAnswers@nazdar.com. 4 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

5 UV LED - NARROW WEB INKS Nazdar.com 5 U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com

6 6800 Series UV LED Flexo Ink (Light Emitting Diode) 6800 Series UV LED (Light Emitting Diode) Flexo Ink is specifically formulated for Tag, Label and Packaging applications. These inks have excellent rheology characteristics making them ideal for most printing equipment and product applications. These inks have been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. PRODUCT OFFERING Process Colors Standard process colors are formulated to print using an anilox volume of BCM. Base Colors Standard base colors are designed to be high strength, and formulated to print using anilox volume of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container Opaque White: 11 lb, 50 lb Base Transparent White: 8lb, 40 lb Other Colors: 9 lb, 45 lb Overprint Varnish: 8 lb, 40 lb Base Printing Colors 6808 Base White/Blanco (BW8) 6809 Base Black/Negro (BW8) 6810 Base Transparent White/Blanco Use to reduce strength and viscosity Base Yellow/Amarillo (BW5) 6812 Base Orange/Naranja(BW6) 6813 Base Warm Red/Rojo (BW5) 6814 Base Rubine Red/Rojo (BW4) 6815 Base Rhodamine Red/Rojo (BW4) 6816 Base Purple/Morado (BW4) 6817 Base Violet/Violeta (BW5) 6818 Base Reflex Blue/Azul (BW5) 6819 Base Process Blue/Azul (BW8) 6820 Base Green/Verde (BW8) 6860 Base Transparent White/Blanco Use to reduce strength. Other Colors 6801 Opaque White 6849 Dense Black UV LED - Flexo Fade Resistant (FR) Colors 6821 FR Yellow/Amarillo (BW7) 6822 FR Orange/Naranja (BW7) 6823 FR Warm Red/Rojo (BW7) 6824 FR Rubine Red/Rojo (BW8) 6825 FR Rhodamine Red/Rojo (BW8) 6826 FR Purple/Morado (BW8) 6827 FR Violet/Violeta (BW8) 6828 FR Reflex Blue/Azul (BW8) Process Colors 6841 Process Yellow/Amarillo (BW5) 6842 Process Magenta/Rojo (BW5) 6843 FR Process Cyan /Azul (BW8) 6844 FR Process Black/Negro (BW8) 6847 FR Process Yellow/Amarillo (BW7) 6848 FR Process Magenta/Rojo (BW8) 6820 Green 6822 Orange 6827 Violet RE393 CARE97 CARE71 CARE41 NWC10 Expanded Gamut Colors Additives UV Reducer (Up to 10% by weight) Photoinitiator for dark colors Non Silicone Defoamer Silicone Leveling Agent Cleaners EZ Cleaner APPLICATION AND USE Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, coated paper & board, PETG, PVC shrink, direct thermal. Anilox Rolls Process Printing: BCM Solid & Line Printing: BCM Plates 6800 Series UV LED Flexo Ink is compatible with most UV Flexo plates currently on the market. Printing 6800 Series UV LED Flexo Ink can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. LED Cure Parameters 6800 Series UV LED Flexo Ink cures at web speeds in excess of 500 fpm (152m/min) when exposed to a 16W/cm 2 UV LED curing lamp, with an output wavelength of 395nm. 6 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

7 Additives All additives should be thoroughly mixed into the ink before each use. Please refer to the 6800 Series UV LED Flexo Additive guide for troubleshooting and usage information, or contact Nazdar for more information. Clean Up Use NWC10 EZ Cleaner. Fade Resistance 6800 Series UV LED Flexo Inks are formulated with standard and fade resistant (FR) pigments. Storage and Handling 6800 Series UV LED Flexo Ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. To prevent premature cure or gelling, keep away from heat, flame and direct light sources. Proper personal protection equipment is required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink Performance Verification. friction. These tests should be performed prior to beginning the full production run. 68NC Series Nestlé Compliant UV LED Flexo Ink 68NC Series UV LED (Light Emitting Diode) Flexo Ink is specifically formulated for Tag, Label and Packaging applications. These inks have excellent rheology characteristics making them ideal for most printing equipment and product applications. These inks were formulated for use with UV LED curing lamps of at least 8W/cm 2, which have an output wavelength of 395nm. 68NC Series UV LED (Light Emitting Diode) Flexo Ink was formulated using ingredients as specified by the Nestle Guidance Note on Packaging Ink - Version Migraton Testing: 68NC Series UV Flexo Ink is formulated to comply with the Nestle Guidance Note on Packaging Inks (21st February 2014). Although 68NC Series UV Flexo Inks are formulated with low migration materials, the end user should determine suitability of the end application by appropriate migration testing. All possible sources of migration and contamination should be evaluated for compliance. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, coated paper & board, PETG, PVC shrink, direct thermal paper. Plates: 68NC Series UV LED Flexo Ink is compatible with most UV Flexo plates currently on the market. Printing: 68NC Series UV LED Flexo Ink can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. LED Cure Parameters: 68NC Series UV LED Flexo Ink cures at web speeds in excess of 700 fpm (210m/min) when exposed to a 16W/cm2 UV LED curing lamp, with an output wavelength of 395nm. Use NWC10 EZ Cleaner. 68NC Series UV LED Flexo Ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. To prevent premature cure or gelling, keep away from heat, flame and direct light sources. Proper personal protection equipment is required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. printed web for all applicable and specified properties. These properties include but are not limited to: migration, cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. PRODUCT OFFERING Process Colors: Standard process colors are formulated to print using an anilox volume of BCM. Base Colors: Standard base colors are designed to be high strength, and formulated to print using anilox volume of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container: Opaque White Base Transparent White Other Colors Overprint Varnish 11 lb, 50 lb 8 lb, 40 lb 9 lb, 45 lb 8 lb, 40 lb 68NC08 68NC09 68NC10 68NC11 68NC21 Base Printing Colors Base White/Blanco (BW8) Base Black/Negro (BW8) Base Transparent White/Blanco Use to reduce strength and viscosity. Base Yellow/Amarillo (BW5) FR Yellow/Amarillo (BW7) U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 7

8 68NC12 68NC22 68NC13 68NC23 68NC14 68NC24 68NC25 68NC26 68NC27 68NC28 68NC19 68NC20 68NC60 68NC01 68NC41 68NC42 68NC43 68NC44 68NC47 68NC48 UV LED - Flexo Base Orange/Naranja(BW6) FR Orange/Naranja (BW7) Base Warm Red/Rojo (BW5) FR Warm Red/Rojo (BW7) Base Rubine Red/Rojo (BW4) FR Rubine Red/Rojo (BW8) FR Rhodamine Red/Rojo (BW8) FR Purple/Morado (BW8) FR Violet/Violeta (BW8) FR Reflex Blue/Azul (BW8) Base Process Blue/Azul (BW8) Base Green/Verde (BW8) Base Transparent White/Blanco Use to reduce strength. Other Colors Opaque White Process Colors Process Yellow/Amarillo (BW5) Process Magenta/Rojo (BW5) FR Process Cyan /Azul (BW8) FR Process Black/Negro (BW8) FR Process Yellow/Amarillo (BW7) FR Process Magenta/Rojo (BW8) 6800 Series UV LED Flexo Metallic Ink 6800 Series UV LED (Light Emitting Diode) Flexo Metallic Ink is specifically formulated for Tag and Label applications. These inks have excellent rheology characteristics making them ideal for most printing equipment and product applications. These Dual Cure inks have been specifically formulated for use with 16W/cm 2 UV LED curing lamps (with an output wavelength of 395nm), or conventional Hg UV lamps. PRODUCT OFFERING Packaging Per Container Silver Gold 8 lb, 10 lb Metallic Printing Colors UV LED Flexo 871 Gold UV LED Flexo 872 Gold UV LED Flexo 873 Gold UV LED Flexo 874 Gold UV LED Flexo 875 Gold UV LED Flexo 876 Gold 682VMS CARE 86 RE306 NWC10 UV LED Flexo Sterling Silver VMP Additives UV initiator UV Reducer Cleaners EZ Cleaner APPLICATION AND USE Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, coated paper & board. 68NC20 68NC22 68NC27 NWC10 Expanded Gamut Colors Green Orange Violet Cleaner EZ Cleaner Anilox Rolls Process Printing: BCM Solid & Line Printing: BCM Plates 6800 Series UV LED Flexo Metallic Ink is compatible with most UV Flexo plates currently on the market. Printing 6800 Series UV LED Flexo Metallic Ink Series can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Clean Up Use NWC10 EZ Cleaner. Fade Resistance 6800 Series UV LED Flexo Metallic Silver inks have Blue Wool values of 7-8 and Bronze inks are 5. 8 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

9 Storage and Handling 6800 Series UV LED Flexo Metallic Ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. To prevent premature cure or gelling, keep away from heat, flame and direct light sources. Proper personal protection equipment is required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Shelf Stability. The UV Flexo Metallic Ink Series in unopened containers have 6 months shelf life. Although useable after 6 months, some loss of brilliance may occur Series UV LED Rotary Screen Ink (Light Emitting Diode) 8700 Series UV LED (Light Emitting Diode) Rotary Screen Ink is formulated specifically for roll label applications. The 8700 Series exhibits exceptional print characteristics such as adhesion to a wide range of substrates, high gloss, abrasion resistance and excellent chemical resist. These inks were formulated for use with UV LED curing lamps of at least 8W/ cm2, which have an output wavelength of 395nm. PRODUCT OFFERING Standard Printing Colors The 8700 series Base Colors have excellent opacity, flow characteristics, and are press ready. The 8700 base colors and 8776 UV LED No-Sil White are designed to be overprinted by other printing technologies such as 6800 Series UV LED Flexo Ink, (see 6800 Series technical data sheet for more information). The 8700 Series standard printing colors can be used in matches to achieve Pantone color simulations. These blend formulations are available at Packaging Per Container Opaque White Base Transparent White Other Colors Overprint Varnish Non Silicone UV LED - Rotary Screen 11 lb, 50 lb 8 lb, 40 lb 9 lb, 45 lb 8 lb, 40 lb Standard Printing Colors Base Transparent White/Blanco Base White/Blanco (BW8) Base Black/Negro (BW8) Base Orange/Naranja (BW6) Base Yellow/Amarillo (BW5) Base Warm Red/Rojo (BW5) Base Rubine Red/Rojo (BW4) Base Rhodamine Red/Rojo (BW4) Base Purple/Morado (BW4) Base Violet/Violeta (BW5) Base Reflex Blue/Azul (BW5) Base Process Blue/Azul (BW8) Base Green/Verde (BW8) Other Colors 8776 Opaque Non Silicone White NWC10 Cleaners EZ Cleaner APPLICATION AND USE Pressure sensitive vinyl, coated paper and board, top coated and print treated polyester, BOPP films, polyethylene and polystyrene. Mesh Selection: Rotary Screen: Use rotary screens which will deposit 5 to 15 microns of ink film thickness. Flat Screens: Use tpi ( tpcm) monofilament polyester mesh. LED Cure Parameters: 8700 Series ink cures up to 300 fpm (90m/min) when exposed to a 16W/cm2 UV LED curing lamp, with an output wavelength of 395nm. Additives All additives should be thoroughly mixed into the ink before each use. Prior to production, test any additive adjustment to the ink. Clean Up Use NWC10 EZ Cleaner. Storage and Handling The 8700 Series ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Keep away from heat, flame and direct light sources. Otherwise, premature cure or gel could occur. are required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Performance Verification. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 9

10 UV LED - Varnishes/Adhesives UV LED - Varnishes/Adhesives OP61002 UV LED Gloss Imprintable Varnish OP61002 UV LED Gloss Imprintable Varnish is used to provide a stampable/imprintable coating over many water based, solvent based, and UV curable inks. OP61002 exhibits high gloss and is specifically formulated for Tag and Label printing. The overprint clear has excellent rheology characteristics making it ideal for most printing equipment, and product applications. This coating has been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Benzophenone (BP): This product is formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP61003 UV LED Gloss Varnish OP61003 UV LED Gloss Varnish is a Premium Gloss Over Print Varnish that exhibits high gloss and is specifically formulated for Tag and Label printing. The overprint clear has excellent rheology characteristics making it ideal for most printing equipment, and product applications. This coating has been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Gloss: 90+ (60 ) Benzophenone (BP) This product is not formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP62001 UV LED Matte Varnish OP62001 UV LED Matte Varnish is a very versatile matte UV LED coating that offers a smooth low gloss finish, high scuff resistance and fast cure. This coating has excellent rheology characteristics making it ideal for most printing equipment, and product applications. This coating has been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Benzophenone (BP) This product is formulated with 10 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

11 formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP63000 UV LED Laminating Adhesive OP63000 UV LED Laminating Adhesive was developed to bond clear films to various films, papers, and foil substrates. OP Series UV Flexo Adhesives are specifically formulated for Tag and Label printing. The laminating adhesives have excellent rheology characteristics making them ideal for most printing equipment, and product applications. This coating has been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Gloss: 90+ (60 ) Benzophenone (BP) This product is formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP63016 UV LED Cold Foil Adhesive OP63016 Cold Foil Adhesive is a non pressure-sensitive adhesive designed to be printed, wet laminated, and cured through special transparent cold foil films. This coating has been specifically formulated for use with 16W/cm2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Benzophenone (BP): This product is formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. friction. These tests should be performed prior to beginning the full production run. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 11

12 OP69001 UV LED Release Varnish OP69001 UV LED Release Varnish is specifically formulated to be used as a release coating. This coating has excellent rheology characteristics making it ideal for most printing equipment, and product applications. This coating has been specifically formulated for use with 16W/cm 2 UV LED curing lamps, which have an output wavelength of 395nm. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Properties: Benzophenone (BP) This product is formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. 12 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

13 UV - NARROW WEB INKS Nazdar.com U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 13

14 UV - Flexo 92NCF Series UV Flexo Ink 92NCF Series UV Flexo Shrink Sleeve Ink is specifically formulated for shrink sleeve applications where extremely low odor is necessary. The ink is highly flexible, and has excellent rheology characteristics making it ideal for most printing equipment, and shrink sleeve applications. 92NCF Series UV Flexo Shrink Sleeve Ink will shrink up to 70%, depending on application. Cure Parameters 92NCF Series UV Flexo Shrink Sleeve Ink was formulated using ingredients as specified by the Nestle Guidance Note on Packaging Ink - version Migration Testing: 92NCF Series UV Flexo Shrink Sleeve Ink is formulated with low migration materials recommended by Nestle. The final converter should determine suitability of the end application by appropriate migration testing. Although the 92NCF Series UV Flexo Shrink Sleeve Ink is formulated to comply with Nestle listed materials, all possible sources of migration and contamination should be evaluated for compliance. These include but are not limited to: press wash, ink, substrate, storage and proper cure. PVC, PETG, PLA and Polystyrene. (Orientation of the material can be MDO or TDO); also BOPP films, polyethylene, coated paper and board. Corona treatment may be necessary for some applications. Anilox Rolls: line (cells per inch) corresponding to a volume from 7.5 to 0.8 bcm. Plates: 92NCF Series UV Flexo Shrink Sleeve Ink is compatible with most UV Flexo plates on the market. Printing: 92NCF Series UV Flexo Shrink Sleeve Ink is formulated to be press ready. 92NCF Series UV Flexo Shrink Sleeve Ink is also suitable for surface printing. 92NCF Series UV Flexo Shrink Sleeve Ink can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: 92NCF Series UV Flexo Shrink Sleeve Ink cures when exposed to a medium pressure mercury vapor lamp set at watts per inch. Thorough cure is critical to low odor and low migration. These guidelines are intended only as a starting point for determining cure parameters, which must be determined under actual production conditions. Additives: All additives should be thoroughly mixed into the ink before each use. Prior to production, test any additive adjustment to the ink. Only Nestle compliant additives should be used. For general clean up use NWC10 EZ Cleaner. To meet Nestle specifications only low odor and non-migratory approved cleaning solvents from the Nestle list should be used. Fade Resistance: 92NCF Series UV Flexo Shrink Sleeve Ink are designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. 92NCF Series UV Flexo Shrink Sleeve Ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. To prevent premature cure or gelling, keep away from heat, flame and direct light sources. Proper personal protection equipment is required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. 92NCF Series UV Flexo Shrink Sleeve Ink is a one-part, 100% solids UV-curable Flexo printing ink and does not contain HDODA or printed web for all applicable and specified properties. These properties include but are not limited to: migration, cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. PRODUCT OFFERING To maintain the integrity of the 92NCF formulation, only approved inks and additives from this sheet may be intermixed. Standard Printing White 92NCF01 NC UV Flxo Opq Shrnk Wht 1P White and NC UV Flxo Opq Shrnk Wht 4P are press ready and have excellent opacity, flow and adhesion characteristics. These whites are NOT designed to mix with any other 92NCF Base Colors. Process Colors Standard process colors are formulated to print using up to 1200 line (0.8 bcm) anilox. Base Colors 92NCF Base Colors are designed to be high strength. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container Opaque White: 11 lb, 50 lb Base Transparent White: 8 lb, 40 lb Other Colors: 9 lb, 45 lb Over Print Varnish: 8 lb, 40 lb 92NCF09 92NCF10 92NCF60 92NCF11 92NCF12 92NCF13 Base Printing Colors Base Black/Negro (BW8) Base Transparent White/Blanco Use to reduce strength and viscosity. Base Transparent White/Blanco Use to reduce strength. Base Yellow/Amarillo (BW5) Base Orange/Naranja(BW6) Base Warm Red/Rojo (BW5) 14 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

15 92NCF14 92NCF19 92NCF20 92NCF21 92NCF22 92NCF23 92NCF24 92NCF25 92NCF26 92NCF27 92NCF28 92NCF41 92NCF42 92NCF43 92NCF44 92NCF47 Base Rubine Red/Rojo (BW4) Base Process Blue/Azul (BW8) Base Green/Verde (BW8) Fade Resistant (FR) Colors FR Yellow/Amarillo (BW7) FR Orange/Naranja (BW7) FR Warm Red/Rojo (BW7) FR Rubine Red/Rojo (BW8) FR Rhodamine Red/Rojo (BW8) FR Purple/Morado (BW8) FR Violet/Violeta (BW8) FR Reflex Blue/Azul (BW8) Process Colors Process Yellow/Amarillo (BW5) Process Magenta/Rojo (BW5) FR Process Cyan /Azul (BW8) FR Process Black/Negro (BW8) FR Process Yellow/Amarillo (BW7) 92NCF48 FR Process Magenta/Rojo (BW8) 92NCF01 Opaque Whites NC UV Flxo Opq Shrnk Wht 1P NC UV Flxo Opq Shrnk Wht 4P NWC10 Cleaner EZ Cleaner 9300 Series UV Flexo Ink 9300 Series UV Flexo Ink was specifically formulated for Tag, Label and Shrink Sleeve printing. These inks have excellent rheology characteristics making them ideal for most flexographic printing equipment and product applications. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, coated paper & board and shrink films. Printing: 9300 Series UV Flexo Ink can be printed over Rotary Screen 8376 No-Sil Combination White. (See the 8300 Series technical data sheet for more information) Series UV Flexo Ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Pretest to determine optimum printing performance for each set of ink, substrate, anilox, press, curing variables/conditions and any post printing processes Series UV Flexo Ink can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: 9300 Series UV Flexo Ink cures when exposed to a medium pressure mercury vapor lamp set at watts per inch. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Ink Handling: Direct skin contact to UV inks is the primary route of exposure and irritation. Therefore, it is recommended that all personnel handling UV products wear gloves and barrier cream to prevent direct skin contact. Safety glasses are suggested in areas where ink may be splashed. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the 9300 Series Material Safety Data Sheet for further instructions and warnings. The 9300 Series Standard Bases, Fade Resistant Bases and Process Colors are HDODA and Benzophenone free. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. PRODUCT OFFERING Packaging Per Container Process Colors Standard process colors are formulated to print using up to 1200 line (0.8 bcm) anilox. Base Colors Standard base colors are designed to be high strength, and formulated to print using anilox volume of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Other Available Products Fluorescents - See UV Flexo Fluorescent Data Sheet Metallics - See UV Flexo Metallic Data Sheet Packaging Per Container Opaque White: 11 lb, 50 lb Base Transparent White: 8 lb, 40 lb Other Colors: 9 lb, 45 lb Overprint Varnish: 8 lb, 40 lb U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 15

16 Base Printing Colors 9308 Opaque Base White/Blanco (BW8) 9309 Base Black/Negro (BW8) 9310 Base Transparent White/Blanco Use to reduce strength and viscosity Base Yellow/Amarillo (BW5) 9312 Base Orange/Naranja(BW6) 9313 Base Warm Red/Rojo (BW5) 9314 Base Rubine Red/Rojo (BW4) 9315 Base Rhodamine Red/Rojo (BW4) 9316 Base Purple/Morado (BW4) 9317 Base Violet/Violeta (BW5) 9318 Base Reflex Blue/Azul (BW5) 9319 Base Process Blue/Azul (BW8) 9320 Base Green/Verde (BW8) 9360 Base Transparent White/Blanco Use to reduce strength Dense Black (BW8) Base Yellow 012 (BW5) Base Orange 021 (BW5) Base Red 032 (BW5) Base Blue 072 (BW5) Fade Resistant (FR) Colors 9321 FR Yellow/Amarillo (BW7) 9322 FR Orange/Naranja (BW7) 9323 FR Warm Red/Rojo (BW7) 9324 FR Rubine Red/Rojo (BW8) 9325 FR Rhodamine Red/Rojo (BW8) 9326 FR Purple/Morado (BW8) 9327 FR Violet/Violeta (BW8) 9328 FR Reflex Blue/Azul (BW8) Process Colors 9341 Process Yellow/Amarillo (BW5) 9342 Process Magenta/Rojo (BW5) 9343 FR Process Cyan /Azul (BW8) 9344 FR Process Black/Negro (BW8) 9347 FR Process Yellow/Amarillo (BW7) 9348 FR Process Magenta/Rojo (BW8) UV - Flexo Opaque Whites 9301 Opaque Printing White Not for blending / Not low odor. Shrink Opaque Whites UV Flxo Opq Shrnk Wht 2P UV Flxo Opq Shrnk Wht Rapid UV Flxo Opq Shrnk Wht Rsist Shrink White LOLM Low odor low migration UV Flexo Shrink White HS RE392 CARE41 CARE70 CARE71 CARE86 NWC10 Additives UV Reducer Silicone Leveling Agent UV Photoinitiator Non-silicone Defoamer UV Photoinitiator Cleaner EZ Cleaner UV Flexo Polar White Ink UV Flexo Polar White Ink exhibits high opacity and is specifically formulated for tag and label printing Series UV Flexo Polar White Ink is designed to provide a high opacity rotary screen look and feel at UV flexo speeds Series UV Flexo Polar White Ink has excellent rheology characteristics and gloss making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene and polystyrene. Note: As with all film substrates, lots may vary and testing is recommended before use. Anilox Rolls: Anilox rolls with a volume of at least 15BCM are recommended for best results. Plates: This Ink Series is compatible with most water based flexo plates on the market. Printing: Softer plates, harder tapes and minimal nip pressure are recommended for best results. This Ink Series can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: This Ink Series is formulated to cure using a medium pressure mercury vapor lamp set at watts per inch. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. 16 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

17 are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. printed web for all applicable and specified properties. These properties include but are not limited to: migration, cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. PRODUCT OFFERING Packaging Per Container Polar White 11 lb, 50 lb Standard Colors 9391 Polar White II 9400 Series UV Flexo Ink 9400 Paper Series UV Flexo Ink was specifically formulated for Tag and Label printing. These inks have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Paper, Board and some films. Anilox Rolls: line (cells per inch) corresponding to a volume from 7.5 to 0.8 bcm. Plates: 9400 Series is compatible with most UV Flexo plates on the market. Printing: 9400 Series can be printed over Rotary Screen 8376 No-Sil Combination White. (See the 8300 Series technical data sheet for more information). The 9400 Series ink is formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Pretest to determine optimum printing performance for each set of ink, substrate, anilox, press, curing variables/conditions and any post printing processes. The 9400 Series can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: 9400 Series ink cures at web speeds up to 1000 fpm when exposed to a medium pressure mercury vapor lamp set at watts per inch. These guidelines are intended only as a starting point for determining cure parameters, which must be determined under actual production conditions. Additives: All additives should be thoroughly mixed into the ink before each use. Prior to production, test any additive adjustment to the ink. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. GENERAL INFORMATION Ink Handling: Direct skin contact to UV inks is the primary route of exposure and irritation. Therefore, it is recommended that all personnel handling UV products wear gloves and barrier cream to prevent direct skin contact. Safety glasses are suggested in areas where ink may be splashed. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the 9400 Series Material Safety Data Sheet for further instructions and warnings. The 9400 Series ink is a one-part, 100% solids UV-curable Flexo printing ink and does not contain HDODA or friction. These tests should be performed prior to beginning the full production run. Fade Resistance: The 9400 Series inks are designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. PRODUCT OFFERING Process Colors: Standard process colors are formulated to print using up to 1200 line (0.8 bcm) anilox. Base Colors: 9400 Base Colors are designed to be high strength. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Other Available Products: Fluorescent Colors See UV Flexo Fluorescent Data Sheet. Metallic Colors- See UV Flexo Metallic Data Sheet. Packaging: The Opaque White is available in 11 lb and 50 lb containers, Base Transparent White is available in 8 lb and 40 lb containers, all other colors are available in 9 lb and 45 lb containers. Clears / Varnishes: 9410 Base Transparent White can be used to reduce the strength of the base, process, and fluorescent colors. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 17

18 UV - Flexo Base Printing Colors 9408 Opaque Base White/Blanco (BW8) 9409 Base Black/Negro (BW8) 9410 Base Transparent White/Blanco 9411 Base Yellow/Amarillo (BW5) 9412 Base Orange/Naranja(BW6) 9413 Base Warm Red/Rojo (BW5) 9414 Base Rubine Red/Rojo (BW4) 9415 Base Rhodamine Red/Rojo (BW4) 9416 Base Purple/Morado (BW4) 9417 Base Violet/Violeta (BW5) 9418 Base Reflex Blue/Azul (BW5) 9419 Base Process Blue/Azul (BW8) 9420 Base Green/Verde (BW8) Fade Resistant (FR) Colors 9421 FR Y ellow/amarillo (BW7) 9422 FR Orange/Naranja (BW7) 9423 FR Warm Red/Rojo (BW7) 9424 FR Rubine Red/Rojo (BW8) 9425 FR Rhodamine Red/Rojo (BW8) 9426 FR Purple/Morado (BW8) 9427 FR Violet/Violeta (BW8) 9428 FR Reflex Blue/Azul (BW8) Process Colors 9441 Process Y ellow/amarillo (BW5) 9442 Process Magenta/Rojo (BW5) 9443 FR Process Cyan /Azul (BW8) 9444 FR Process Black/Negro (BW8) 9447 FR Process Yellow/Amarillo (BW7) 9448 FR Process Magenta/Rojo (BW8) Additives RE393 UV Reducer (Up to 10% by weight) UV Flexo Metallic Ink The UV Flexo Metallic Ink Series is an ink system which offers high brilliance and good printability. Paper, Paperboard, and various films. Use NWC10 EZ Cleaner These inks are formulated to be press ready. Thoroughly mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. To prevent premature cure or gelling, keep away from heat, flame and direct light sources. Proper personal protection equipment is required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Fade Resistance: UV Flexo Metallic Ink is designed for interior applications only. Shelf Stability: The UV Flexo Metallic Ink Series in unopened containers will have a minimum of 3 months shelf stability. Although useable after 3 months, some loss of brilliance may occur. Benzophenone: These inks are formulated without benzophenone. PRODUCT OFFERING UM UM UM UM UM UM UM Metallic Printing Colors UV Flexo 876 Gold UV Flexo 872 Gold UV Flexo 873 Gold UV Flexo 874 Gold UV Flexo 871 Gold UV Flexo 875 Gold UV Flexo 877 Silver UM UV Flexo 877 Silver UM UV Flexo Shrink Silver Cleaner Additives NWC10 EZ Cleaner CARE 86 UV Initiator RE393 UV Reducer Cleaner NWC10 EZ Cleaner 18 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

19 UV - Rotary Screen 8300 Series UV Rotary Screen Ink 8300 Series UV Rotary Screen Ink is formulated specifically for roll label applications. The 8300 Series exhibits exceptional print characteristics such as adhesion to a wide range of substrates, high gloss, abrasion resistance and excellent chemical resist. Pressure sensitive vinyls, coated paper and board, top coated and print treated polyester, BOPP films, polyethylene and polystyrene. Surface energy of substrates should be at least 40 dynes/cm to achieve proper adhesion. The use of in-line, on press corona treatment can increase the dyne level of many substrates. Mesh Selection: Rotary Screen: Use rotary screens which will deposit 5 to 15 microns of ink film thickness. Flat Screens: Use tpi ( tpcm) monofilament polyester mesh. Cure Parameters: 7400 UV Letterpress Series ink cures at web speeds up to 500 fpm when exposed to a medium pressure mercury vapor lamp set at watts per inch. These guidelines are intended only as a starting point for determining cure parameters, which must be determined under actual production conditions Stencil: Solvent resistant, UV ink compatible direct emulsions and capillary films. Squeegee: durometer polyurethane squeegee. Coverage: square feet ( square meters) per gallon depending upon ink deposit. Cure Parameters: 8300 Series ink cures when exposed to a medium pressure mercury vapor lamp set at watts per inch at web speeds of up to 250 ft/min. Cure parameters must be determined under actual production conditions. Additives: All additives should be thoroughly mixed into the ink before each use. Prior to production, test any additive adjustment to the ink. Use NWC10 EZ Cleaner. mix the ink prior to printing. Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Keep away from heat, flame and direct light sources. Otherwise, premature cure or gel could occur. Proper personal protection equipment and adequate ventilation are required when handling this material. Please consult MSDS for details on proper handling of this material. Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Standard Printing Colors: The 83300/83400 series Base Colors have excellent opacity, flow characteristics, and are press ready. The base colors and 8376 No-Sil Combination White are designed to be overprinted by other printing technologies such as 9300 Series UV Flexo, (see 9300 Series technical data sheet for more information). The 8300 Series standard printing colors can be used in matches to achieve Pantone color simulations. These blend formulations are available at Overprint/Mixing Clears: 8327 Mixing/Overprint Clear contains silicone and can be used to reduce the density of colors, or as a clear base for special effect additives such as Metallics Transparent White is non- silicone based and can be used to reduce the density of the colors or as a clear base for special effects additives such as Metallics.. Flourescent Colors: The 8300 series fluorescent colors have the tendency to settle; so high speed mixing is required prior to printing. Fluorescent colors fade with exposure to ultraviolet light. This includes outdoor exposure as well as UV lamp exposure. It is therefore recommended to adjust art so these colors are the final colors printed on any image. Tactile Inks: Tactile inks are available; please see the UV Rotary Screen Tactile Ink Technical Data Sheet for more information. Overprint Clears: UV Rotary Screen Overprint Clears are also available; please consult the corresponding Technical Data Sheet for details of these items. Packaging: The Opaque Whites are available in 11 lb and 50 lb containers, Mixing/Overprints Clears are available in 8 lb and 40 lb containers, all other colors are available in 9 lb and 45 lb containers. Additives/Reducers are available in quart and gallon containers. Cleaners are available in 8 lb, 40 lb and 468 lb containers. Fade Resistance: The 8300 Series inks are designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. The 8300 Series ink is formulated to be press ready. Thoroughly U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 19

20 UV - Rotary Screen Silicone Non-Silicone Standard Printing Colors Transparent White 8327 Mixing/Over Print Clear Tinting White Tinting Black Orange Yellow Warm Red Rubine Red Rhodamine Red Purple Violet Reflex Blue Process Blue Green OP8001 OP8002 Overprint Colors R/S Gloss OPV Clear (See OP8001 TDS for more details) R/S Gloss Varnish (See OP8002 TDS for more details) 8327 Mixing/Over Print Clear Tactile Varnishes R/S Tactile Varnish - Standard Viscosity (See UV Rotary Screen Tactile Ink TDS for more details) R/S Tactile Varnish - High Viscosity RE200 NWC10 (See UV Rotary Screen Tactile Ink TDS for more details) Additives/Reducers UV Reducer Cleaners EZ Cleaner Non-Silicone Containing Whites 8376 Combination White 8375 Combo White Combo White Beverage White Silicone Containing Whites 8378 High Intensity White 8379 High Intensity Black 8377 White Flourescent Colors Orange Yellow Orange Orange/red Red Cerise Pink Blue Green Magenta 20 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

21 UV - Letterpress 6400 Series UV Flexo Ink 6400 Offset Paper Series Ink was specifically formulated for Tag and Label printing. The 6400 has excellent print quality especially at high speeds. The 6400 inks have excellent color strength, curing, adhesion and scratch resistance UV Offset Series is suitable for a variety of paper substrates such as: Gloss, Semi-gloss, Cast gloss, Bond, Uncoated and folding carton SBS, SUS and CCNB. Also works on some films. Properties: Excellent color consistency and mileage Non - Bleed Very good adhesion to a wide variety of substrates Great print quality at high speeds Excellent curing High Quality Plates/Blankets: 6400 UV Offset Series is compatible with UV Offset plates and blankets on the market. Printing: 6400 UV Offset Series can be printed over Rotary Screen 8376 No-Sil Combination White, s and over 9301 Flexo Opaque White (See the 8300 and 9300 Series technical data sheets for more information). Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Pretest to determine optimum printing performance for each set of inks, substrate, press, curing variables/conditions and any post printing processes. The 6400 UV Offset Series can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: 6400 UV Offset Series ink cures at web speeds up to 1000 fpm when exposed to a medium pressure mercury vapor lamp set at watts per inch. These guidelines are intended only as a starting point for determining cure parameters, which must be determined under actual production conditions. Ink Handling: Direct skin contact to UV inks is the primary route of exposure and irritation. Therefore, it is recommended that all personnel handling UV products wear gloves and barrier cream to prevent direct skin contact. Safety glasses are suggested in areas where ink may be splashed. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the 6400 UV Offset Series Material Safety Data Sheet for further instructions and warnings. The 6400 UV Offset Series ink is a one-part, 100% solids UV-curable offset printing ink and does not contain HDODA or Standard Printing White The 6401 Opaque White has excellent opacity and can be used as first down or where opacity is critical when trapping other colors. Process Colors The 6400 UV Offset Series 4 color process inks are based on SWOP standards. Base Colors The 6400 UV Offset Base Series are designed to be high strength. The base colors can be mixed together to achieve an unlimited number of strong vibrant colors. Additives: Reducer: Use RE364 UV Tack Reducer to reduce the viscosity of the ink. Add 3-4% by weight. Each percentage added will reduce tack rpm Photoinitiator: Use CARE70 to improve cure. Add 1-2% by weight. Isopropyl alcohol, denatured alcohol or any suitable commercial press wash. Standard Printing Colors 6401 Base Opaque White/Blanco 64C09 64C10 64C11 64C13 64C14 64C15 64C16 64C17 64C18 64C19 64C20 Base Printing Colors Base Black/Negro Base Transparent White/Blanco Base Yellow/Amarillo Base Warm Red/Rojo Base Rubine Red/Rojo Base Rhodamine Red/Rojo Base Purple/Morado Base Violet/Violeta Base Reflex Blue/Azul Base Process Blue/Azul Base Green/Verde Process Colors 6441 Process Yellow/Amarillo 6442 Process Magenta 6443 Process Cyan/Azul 6444 Process Black/Negro RE364 CARE70 Additives/Reducers UV Tack Reducer UV Photoinitiator Dark Trapping: The 6400 UV Offset inks are formulated for tack stepping 14-17@ 800rpm and can be wet trapped. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 21

22 UV - Letterpress 7400 Series UV Flexo Ink 7400 Letterpress Series Ink was specifically formulated for Tag and Label printing. The 7400 has excellent print quality especially at high speeds. The 7400 inks have excellent color strength, curing, adhesion and scratch resistance UV Letterpress Series is suitable for a variety of treated film and paper substrates such as: BOPP, Polyethylene, Polyester, Gloss, Semi-gloss, Cast gloss, Bond, Uncoated and folding carton SBS, SUS and CCNB. Also works on some films. Properties: Excellent color consistency and mileage Non - Bleed Very good adhesion to a wide variety of substrates Great print quality at high speeds Excellent curing High Quality Plates: 7400 UV Letterpress Series is compatible with UV Letterpress plates on the market. Printing: 7400 UV Letterpress Series can be printed over Rotary Screen 8376 No-Sil Combination White, s and over 9301 Flexo Opaque White (See the 8300 and 9300 Series technical data sheets for more information). Maintain ink temperature at F (18-32 C) for optimum print and cure performance. Pretest to determine optimum printing performance for each set of inks, substrate, press, curing variables/conditions and any post printing processes. The 7400 UV Letterpress Series can be affected by stray UV light in and around a printing facility. Be aware of skylights, windows and overhead lights curing the ink. Light filters are recommended. Keep ink containers covered when not in use. Cure Parameters: 7400 UV Letterpress Series ink cures at web speeds up to 500 fpm when exposed to a medium pressure mercury vapor lamp set at watts per inch These guidelines are intended only as a starting point for determining cure parameters, which must be determined under actual production conditions Ink Handling: Direct skin contact to UV inks is the primary route of exposure and irritation. Therefore, it is recommended that all personnel handling UV products wear gloves and barrier cream to prevent direct skin contact. Safety glasses are suggested in areas where ink may be splashed. If ink does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the 7400 UV Letterpress Series Material Safety Data Sheet for further instructions and warnings. The 7400 UV Letterpress Series ink is a one-part, 100% solids UV-curable Letterpress printing ink and does not contain HDODA or Standard Printing White The 7401 Opaque White has excellent opacity and can be used as first down or where opacity is critical when trapping other colors. Process Colors The 7400 UV Letterpress Series 4 color process inks are based on SWOP standards. Base Colors The 7400 UV Letterpress Base Series are designed to be high strength. The base colors can be mixed together to achieve an unlimited number of strong vibrant colors. Additives: Reducer: Use RE306 UV Reducer to reduce the viscosity of the ink. Add 3-4% by weight. Each percentage added will reduce tack rpm Photoinitiator Use CARE70 to improve cure. Add 1-2% by weight. Isopropyl alcohol, denatured alcohol or any suitable commercial press wash. Standard Printing Colors 7401 Base Opaque White/Blanco Base Printing Colors 7409 Base Black/Negro 7410 Base Transparent White/Blanco 7411 Base Yellow/Amarillo 7413 Base Warm Red/Rojo 7414 Base Rubine Red/Rojo 7415 Base Rhodamine Red/Rojo 7416 Base Purple/Morado 7417 Base Violet/Violeta 7418 Base Reflex Blue/Azul 7419 Base Process Blue/Azul 7420 Base Green/Verde Process Colors 7441 Process Yellow/Amarillo 7442 Process Magenta 7443 Process Cyan/Azul 7444 Process Black/Negro RE364 CARE70 Additives/Reducers UV Tack Reducer UV Photoinitiator Dark 22 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

23 UV - Varnishes/Adhesives OP1001 UV Flexo GP Varnish AF The OP1001 UV Flexo GP Varnish is formulated to be nonbleeding and lower odor than other UV varnishes. OP Series UV Flexo Varnishes are specifically formulated for Tag and Label printing. The OP1001 exhibits better rub characteristics than the OP1003. The overprint clears have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive direct thermal coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: 400 C Cure: W/inch Medium Pressure Hg Lamp Gloss: >80 (60 ) Rub: 800+ Sutherland Rubs (4lb weight, face to face) Slide: 6-10 Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1003 UV GP Varnish AF OP1003 is formulated to be non-bleeding and lower odor then other UV Varnishes. The OP1003 is specifically formulated for Tag and Label printing. The overprint varnish has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP film, polyethylene, polystyrene and some paper & board. Target Viscocity: 400 C Cure: W/inch Medium Pressure Hg Lamp Gloss: >80 (60 ) Rub: 500+ Sutherland Rubs (4lb weight, face to face) Slide: 8-12 (face to face) MEK: >50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1005 UV GP Gloss Varnish OP1005 GP UV Flexo Varnish exhibits high gloss and is specifically formulated for Tag and Label printing. The overprint clear has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Cure: W/inch Medium Pressure Hg Lamp Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 23

24 UV - Varnishes/Adhesives friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1007 UV Gloss Resist Varnish OP1007 UV Gloss Resist Varnish is specifically formulated for overprinting digitally printed Tag and Label applications. The overprint varnish exhibits high gloss and has excellent rheology characteristics making it ideal for most printing equipment. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and board stocks. Target Viscocity: 300 C Cure: W/inch Medium Pressure Hg Lamp Gloss: >80 (60 ) Rub: 500+ Sutherland Rubs (4lb weight, face to face) Slide: <12 (face to face) MEK: >50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1008 UV Gloss Resist II Varnish OP1008 UV Gloss Resist Varnish is specifically formulated for overprinting digitally printed Tag and Label applications. OP1008 has better chemical and water resistance when compared with OP1007. The overprint varnish exhibits high gloss and has excellent rheology characteristics making it ideal for most printing equipment. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and board stocks. Target Viscocity: 310 C Cure: watts/inch Gloss: > 75 (60 ) Rub: > 500 cycles - 4lb weight, face to face Slide: <10 (face to face) MEK: >50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1009 UV Gloss Resist Varnish OP1009 UV Flexo Varnish is a Benzophenone Free Varnish that exhibits high gloss and is specifically formulated for Tag and Label printing. The overprint clear has excellent rheology characteristics, 24 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

25 making it ideal for most printing equipment and product applications. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: 440 C Cure: watts per inch Gloss: >80 (60 ) Rub: > 500 cycles - 4lb weight, face to face Slide: <12 MEK: >50 double rubs Benzophenone (BP): This product is Not formulated with line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1010 UV Gloss Flexo Varnish OP1010 is specifically formulated for overprinting digitally printed Tag and Label applications. The overprint varnish exhibits high gloss and has excellent rheology characteristics making it ideal for most printing equipment. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: 300 C Cure: watts/inch Gloss: >80 (60 ) Rub: > 500 cycles - 4lb weight, face to face Slide: <12 (face to face) MEK: >50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF line (cells per inch) corresponding to a volume from 8.0 to 5.0 bcm. Reverse angle doctor blade is recommended. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1011 UV Gloss Varnish 722 OP1011 was formulated with raw materials that comply with the US Food and Drug Administration s (FDA) Food Contact Notification (FCN) No This product may be used as described in the FCN No There are many types of food packages and the printing ink is only one constituent. Nazdar does not control the parameters in food package printing, packing and storage, therefore, Nazdar is not able to issue certificates or declarations of compliance which cover the legal responsibility of the entire packaging chain. The manufacturer of the packaging and the filler are responsible for the properties of the food packaging and its compliance with applicable legal requirements. While technical information and advice on the use of this product is provided in good faith, the User bears sole responsibility for selecting the appropriate product for their end-use requirements. See full disclaimer at the end of the document. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: sec/#3 Zahn Cure: watts per inch Gloss: >80 (60 ) Benzophenone (BP): This product is Not formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 25

26 UV - Varnishes/Adhesives friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1012 UV Gloss M Varnish OP1012 is specifically formulated for overprinting digitally printed Tag and Label applications. The overprint varnish exhibits high gloss and has excellent rheology characteristics making it ideal for most printing equipment. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: 300 C Cure: watts per inch Gloss: >80 Rub: > 500 cycles - 4lb weight, face to face Slide: <12 (face to face) MEK: > 50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1012 An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1013 Combo Screen/Coater TC OP1013 has been developed for press application via screen, blanket, tower, dampener, flexo, or converted offset coating units. This topcoat will exhibit excellent flow, leveling properties, resulting in high gloss cured films with excellent flexibility and rub/scuff resistance. Pressure sensitive coated papers, paper & board stocks. Target Viscocity: C Cure: 300 ft/min Gloss: 90+ (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: Not available An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1015 Gloss Roller Coat Clear OP1015 has been developed for roller coat applications. This topcoat will exhibit excellent flow, leveling properties, resulting in high gloss cured films with excellent flexibility and rub/scuff resistance. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. 26 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

27 Target Viscocity: C Cure: watts per inch Gloss: 80+ (60 ) Benzophenone (BP): This product is Not formulated with Apply with a Roller Coater. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1016 UV GP Gloss OPV OP1016 is a solvent-free, UV curable general purpose coating. This product exhibits excellent adhesion to paper and some treated film stocks. It exhibits excellent flow, wet out, and leveling. It is recommended for use with solvent base, UV curable and water base inks to provide a good overall set of properties to labels at an economical Price. The product has good scuff, excellent chemical resistance, good water resistance, and a very high gloss. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C Cure: watts per inch Gloss: 85+ (60 ) Rub: Sutherland Rubs (4lb Weight) Slide: <12 (face to face) Resistance: Solvent and Water Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1027 An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1017 UV Gloss IMP Varnish OP1017 is a solvent-free, UV curable stampable coating. This product exhibits excellent adhesion to paper and some treated film stocks. It exhibits excellent flow, wet out, and leveling. It is used to provide a stampable, low fingerprint coating over many water based, solvent based, and UV curable inks. Pressure sensitive coated papers, and treated films. Target Viscocity: C/77 F Cure: watts per inch Gloss: 85+ (60 ) Rub: Sutherland Rubs (4lb Weight) Benzophenone (BP): This product is formulated with BP Free Alternative: Not available An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 27

28 UV - Varnishes/Adhesives OP1019 UV Hot Stampable Primer OP1019 is a solvent-free, UV curable stampable coating. This product exhibits excellent adhesion to paper and some treated film stocks. It exhibits excellent flow, wet out, and leveling. It is used to provide a stampable, low fingerprint coating over many water based, solvent based, and UV curable inks. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C/77 F Cure: 175+ ft/min 300W/in Hg lamp Gloss: 85+ (60 ) Rub: Sutherland Rubs (4lb Weight) Benzophenone (BP): This product is formulated with BP Free Alternative: Not available An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1021 UV Flexo DT OPV OP1021 is a solvent-free, UV topcoat designed specifically for use with direct thermal substrates. This product exhibits excellent adhesion to paper and most treated film stocks. It exhibits good flow, wet out, and leveling properties. The result is very high gloss with excellent adhesion, flexibility, and clarity. The product is durable and offers good chemical resistance. Pressure sensitive direct thermal coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: F Cure: 300W/in Hg Lamp Appearance: Amber Liquid Benzophenone (BP): This product is formulated with BP Free Alternative: Not available formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1027 Premium Gloss OPV OP1027 Premium Gloss Over Print Varnish exhibits high gloss and is specifically formulated for Tag and Label printing. The overprint clear has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Target Viscocity: C Cure: 400 ft/min with one 300w/in lamp Gloss: 90 (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1027 formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product 28 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

29 resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1028 Premium Gloss HS OPV OP1028 is a high gloss UV coating. This product exhibits excellent adhesion to paper and some treated film stocks. It exhibits excellent flow, wet out, and leveling. It is recommended for use with solvent base, UV curable and water base inks to provide a good overall set of properties to labels at an economical Price. The product has good scuff, excellent chemical resistance, good water resistance, and a very high gloss. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C Cure: watts per inch Gloss: >90 (60 ) MEK: Excellent. 100 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: Not available formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1030 UV Gloss IMP Varnish II OP1030 is a solvent-free, UV curable stampable coating. This product exhibits excellent adhesion to paper and treated film stocks. It exhibits excellent flow, wet out, and leveling. It is used to provide a stampable/ imprintable coating over many water based, solvent based, and UV curable inks. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Target Viscocity: C/77 F Cure: watts per inch Gloss: 90 (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1030 formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1031 UV Gloss TT Imprintable Coating OP1031 is a UV curable coating that can be foil stamped, imprinted, laser printed or written on with most pens or markers. This product exhibits excellent flow, wet out, and leveling. It is used to provide a stampable/ imprintable coating over many water based, solvent based, and UV curable inks. Most paper and and film based label substrates. Target Viscocity: C/77 F U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 29

30 UV - Varnishes/Adhesives Cure: 200 ft/min with one 300w/in lamp Gloss: 90 (60 ) Benzophenone (BP): This product is formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1032 UV Scuff Resistant Gloss BPF OPF1032 is a versatile, fast curing Benzophenone Free UV curable scuff resistant coating. This product exhibits excellent adhesion to paper and treated film stocks. It exhibits excellent flow, wet out, and leveling. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Target Viscocity: C Gloss: 95 ± 4 (60 ) Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP1103 UV Gloss Imprintable Varnish OP1103 UV Flexo Varnish exhibits outstanding product resistance to water, chemicals and a very high gloss. The OP1103 exhibits excellent flow, wet out, and leveling. Varnish has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C/77 F Cure: 300W/in Hg lamp, 450+ fpm Gloss: 85+ (60 ) Rub: (4lb weight) Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1027 An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. 30 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

31 OP1107 UV Flexo HP Digital Resistance OP Varnish OP1107 UV Flexo HP Digital Resistant OP Varnish is specifically formulated for overprinting digitally printed Tag and Label applications. The overprint varnish exhibits high gloss and has excellent rheology characteristics making it ideal for most printing equipment. Digitally printed pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and board stocks. Target Viscocity: 300 C/77 F Cure: 300W/in Hg lamp, 450+ fpm Gloss: >80 (60 ) Rub: >500 cycles (4lb weight, face to face) Slide: <12 MEK: >50 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF1107 An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP2001 UV Matte Varnish OP2001 Matte UV Flexo Varnish was specifically formulated as a matte finish general purpose for Tag and Label printing. The overprint varnish has excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Gloss: 8-12(60 ) MEK: >100 double rubs Benzophenone (BP): This product is formulated with BP Free Alternative: OPF2001 An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP2014 UV Matte Imprintable OPV OP2014 is a very versatile matte UV coating that offers a smooth low gloss finish, high scuff resistance, fast cure and can be foil stamped, imprinted or written on with a pen or marker. Specifically formulated for paper and film pressure sensitive materials for flexo label applications. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Target Viscocity: cps, #3 C/77 F Cure: 225 ft/min with one 300 watt/inch Hg lamp Gloss: <15 (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: Not available formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include Target Viscocity: 750 C/77 F Cure: 300W/in Hg lamp U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 31

32 UV - Varnishes/Adhesives but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP2015 UV Matte Varnish OP2015 UV Matte Varnish is a very versatile matte UV coating that offers a smooth low gloss finish, high scuff resistance and fast cure. The OP2015 UV MATTE VARNISH has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Target Viscocity: C/77 F Cure: W/in Hg lamp Gloss: <15 (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: Not Available formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP2017 UV Scuff Resistant Matte BPF OPF2017 is a versatile, fast curing Benzophenone Free UV curable matte scuff resistant coating. This product exhibits excellent adhesion to paper and treated film stocks. It exhibits excellent flow, wet out, and leveling. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Target Viscocity: C/77 F Gloss: 13 ± 3 (60 ) Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP2018 UV Matte Imprintable Varnish OP2018 UV Matte Imprintable varnish is a very versatile matte UV coating that offers a smooth low gloss finish, high scuff resistance and fast cure. The OP2018 UV Matte Imprintable Varnish has excellent rheology characteristics, and press stability making it ideal for most printing equipment, and product applications. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Cure: W/in Hg lamp Benzophenone (BP): This product is formulated with BP Free Alternative: Not Available 32 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

33 formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3000 UV Laminating Adhesive OP3000 UV Laminating Adhesive was developed to bond clear films to various films, papers, and foil substrates. OP Series UV Flexo Adhesives are specifically formulated for Tag and Label printing. The laminating adhesives have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board.. Target Viscocity: 750 C Cure: 300W/in Hg lamp Benzophenone (BP): This product is Not formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3003 UV Release Coating OP3003 UV Release Coating is designed to be used with most pressure sensitive adhesives for multi-layered construction of booklets, coupons and extended flap labels. The UV Release Coating has excellent rheology characteristics, and superior cure speed. OP3017 UV Flexo Peel & Release Adhesive can be used with the OP3003 to create a Peel/Reseal type of label where the label can be opened and resealed multiple times. OP3018 UV Flexo Dry Peel Adhesive can be used with the OP3003 to create a Dry Peel type label. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C Cure: 300W/in Hg lamp MEK: > 10 double rubs Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3015 Laminating Adhesive OP3015 Laminating Adhesive was developed to bond clear films to various films, papers, and foil substrates. OP Series UV Flexo Adhesives are specifically formulated for Tag and Label printing. The laminating adhesives have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 33

34 UV - Varnishes/Adhesives Target Viscocity: C Cure: 250 fpm with one 300W/in Hg lamp Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3016 Cold Foil Adhesive OP3016 Cold Foil Adhesive is a non pressure-sensitive adhesive designed to be printed, wet laminated, and cured through special transparent cold foil films. Superior processing speeds and competitive material costs enable OP3016 to provide significant economic advantages over other cold foil adhesives or traditional hot foil die set-ups. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Target Viscocity: C Cure: W/in Hg lamp Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3017 Peel & Release Adhesive OP3017 UV Flexo Peel & Release Adhesive can be used with the OP3003 to create a Peel/Reseal type of label where the label can be opened and resealed multiple times. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C Cure: 300W/in Hg lamp Benzophenone (BP): This product is Not formulated with An anilox with a BCM range of is suggested for flexo formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. 34 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

35 OP3018 Dry Peel Adhesive OP3018 UV Flexo Dry Peel Adhesive can be used with the OP3003 to create a Dry Peel type label. Pressure sensitive coated papers, vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and paper & board stocks. Target Viscocity: C Cure: 300W/in Hg lamp Benzophenone (BP): This product is Not formulated with An anilox with a BCM range of 5-10 is suggested for flexo applications, with a reverse angle doc tor blade. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3019 Laminating Adhesive OP3019 Laminating Adhesive was developed to bond clear films to various films, papers, and foil substrates. OP Series UV Flexo Adhesives are specifically formulated for Tag and Label printing. The laminating adhesives have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, paper and board. Benzophenone (BP): This product is Not formulated with printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OP3020 Laminating Adhesive OP3020 Laminating Adhesive was developed to bond clear films to various films, papers, and foil substrates. OP Series UV Flexo Adhesives are specifically formulated for Tag and Label printing. The laminating adhesives have excellent rheology characteristics making them ideal for most printing equipment, and product applications. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, paper and board. Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 35

36 36 UV - Varnishes/Adhesives OP8003 R/S Gloss Varnish OP8003 Rotary Screen Gloss Varnish is formulated for roll label applications. The OP8003 exhibits exceptional print characteristics such as adhesion to a wide range of substrates, has a high gloss, and excellent abrasion resistance. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper and board. Target Viscocity: cps 3@50 Cure: 300W/in Hg lamp Gloss: 80+ (60 ) Benzophenone (BP): This product is formulated with BP Free Alternative: Not available It is recommended that you use a screen that will apply an ink film thickness of 5-15 microns. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OPF1032 Scuff Resistant Gloss BP Free OPF1032 is a versatile, fast curing Benzophenone Free UV curable scuff resistant coating. This product exhibits excellent adhesion to paper and treated film stocks. It exhibits excellent flow, wet out, and leveling. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Target Viscocity: Gloss: 95 ± 4 (60 ) Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. OPF2017 Scuff Resistant Matte BPF OPF2017 is a versatile, fast curing Benzophenone Free UV curable matte scuff resistant coating. This product exhibits excellent adhesion to paper and treated film stocks. It exhibits excellent flow, wet out, and leveling. Pressure sensitive vinyl s, top coated and print treated polyester, BOPP films, polyethylene, polystyrene and some paper & board. Target Viscocity: C Gloss: 13 ± 3 (60 ) Benzophenone (BP): This product is Not formulated with formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. stored in a sealed container away from heat, flame and should not be exposed to any direct light source. Otherwise, premature cure or gel could occur. The product should be mixed prior to use. An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

37 Water Based - NARROW WEB INKS Nazdar.com37 U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com

38 38 Water Based - Flexo W100 Series Water Based Flexo Paper Ink The W100 Series Water Based Flexo Paper Ink is specifically formulated to meet the demands of today s Narrow Web converters. The W100 Series Water Based Paper Ink features: Ease of Use High Speed Printing Good Color Strength Excellent Press Stability Superior Resolubility Coated / Uncoated Paper. Viscosity: On average sec., #3 77 F ph Range: Plates: This ink Series is compatible with most WB Flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. The ph and viscosity of the ink should be maintained during printing with the use of additives to adjust ph and viscosity. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent). Wash the affected area with soap and water. Consult the W100 Series Material Safety Data Sheet for further instructions and warnings. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run. Fade Resistance: This ink series is designed for interior applications only. Fade Resistant colors are not available in this Series. If fade resistance is required please contact your local Nazdar representative for an alternate product recommendation. PRODUCT OFFERING Process Colors: Standard process colors are formulated to print using anilox volume of BCM. Base Colors: Standard base colors are designed to be high strength, and formulated to print using anilox volume of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container: Opaque White: 11 lb, 50 lb, 500lb Base Transparent White: 8 lb, 40 lb, 400lb Other Colors: 9 lb, 45 lb, 450lb W W W W W W W W W W W W W W W W W CARE79 CARE75 RE192 NWC10 Base Printing Colors Opaque White An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone: Black Transparent White Yellow Orange Warm Red Rubine Red Rhodamine Red Purple Violet Reflex Blue Process Blue Green Process Colors Process Yellow Process Magenta Process Cyan Process Black Additives ph Adjuster Defoamer Retarder (Slow Additive) Cleaner EZ Cleaner W300 Series Water Based Flexo Ink The W300 Series Water Based Film Ink is specifically formulated to meet the demands of today s Narrow Web Label converters. The W300 Series Water-Base Film Ink features: High Speed Printing Easy to use

39 High Color Strength Compatible with Water-base and UV Coatings Fast Drying Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, coated paper and board. Note: As with all film substrates, lots may vary and testing is recommended before use. Anilox Rolls: For standard colors use an anilox with a cell volume of 3.0 bcm bcm. For process colors use an anilox with a cell volume of bcm. Viscosity: On average sec., #3 77 F ph Range: Plates: Compatible with most WB Flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. The ph and viscosity of the ink should be maintained during printing with the use of additives to adjust ph and viscosity, See the additive guide. Use NWC10 EZ Cleaner. Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Standard Colors 3bcm/PN 4bcm/PN Opaque White W W Black W W Transparent White W W Yellow W W Orange W W Warm Red W W Rubine Red W W Rhodamine Red W W Purple W W Violet W W Reflex Blue W W FR Process Blue (BW8) W W FR Green (BW8) W W Fade Resistant Colors 3bcm/PN 4bcm/PN FR Yellow (BW6) W W FR Orange (BW6) W W FR Warm Red (BW6) W W FR Rubine Red (BW6) W W FR Rhodamine Red (BW8) W W FR Purple (BW8) W W FR Violet (BW8) W W FR Reflex Blue (BW8) W W Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the W300 Series Material Safety Data Sheet for further instructions and warnings. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run. Fade Resistance: This ink series is designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. PRODUCT OFFERING Standard Printing Colors: The W300 Series is available in 3 ranges of standard printing colors when using a 3bcm, 4bcm and 5bcm anilox rollers. There is also a set of fade resistant (FR) colors. Process Colors Process Yellow Process Magenta FR Process Yellow (BW6) FR Process Magenta (BW6) FR Process Cyan (BW8) FR Process Black (BW8) Process Extender Additives Stabilizer PH Adjuster Defoamer Film Aid Paper Reducers Slow Reducer W W W W W W W CARE73 CARE74 CARE75 CARE77 RE198 4 Color Process: The W300 Series 4 color process inks are designed to print with anilox rollers having 1-2 bcm. W300 is also available in fade resistant (FR) colors. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 39

40 W510 Series Water Based Flexo Ink W510 Series Water Based Flexo Inks have been formulated to meet the needs of SHRINK SLEEVE and LAMINATION applications. With superb press stability, high run speeds, and excellent color strength this ink system is sure to meet the needs of today s flexographic printers. W510 Series Water Based Flexo Inks perform well in both inline and offline lamination applications with various adhesive chemistries. W510 Series Water Based Flexo Inks can also be used for Reverse Print Shrink Sleeves when combined with our high slip opaque white inks. PVC and PET Note: As with all film substrates, lots may vary and testing is recommended before use Anilox Rolls: For standard colors use an anilox with a cell volume of 3.0 bcm BCM. For process colors use an anilox with a cell volume of BCM. Viscosity: On average sec., #3 77 F ph Range: Water Based - Flexo Plates: This ink Series is compatible with most water based flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. The ph and viscosity of the ink should be maintained during printing with the use of additives to adjust ph and viscosity. See the additive guide. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the Ink Series Material Safety Data Sheet for further instructions and warnings. and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run. Fade Resistance: This ink series is designed for interior applications only. The colors designated with (FR) are formulated with pigments which have extended fade resistance. PRODUCT OFFERING Process Colors: Standard process colors are formulated to print using BCM aniloxes. Base Colors: Standard base colors are designed to be high strength, and formulated to print using anilox volume of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container: Opaque White: 11 lb, 50 lb, 500lb Base Transparent White: 8 lb, 40 lb, 400lb Other Colors: 9 lb, 45 lb Overprint Varnish: 8 lb, 40 lb, 450lb Standard Colors BW W Base Black 8 W Transparent White - W Base Yellow 5 W Base Orange 6 W Base Warm Red 5 W Base Rubine Red 4 W Base Rhodamine Red 3 W Base Purple 3 W Base Violet 4 W Base Reflex Blue 4 W FR Process Blue 8 W FR Green 8 W Dense Black 8 Fade Resistant Colors BW W FR Yellow 6 W FR Orange 6 W FR Warm Red 6 W FR Rubine Red 6 W FR Rhodamine Red 8 W FR Purple 8 W FR Violet 8 W FR Reflex Blue 8 Process Colors BW W Process Yellow 5 W Process Magenta 4 W FR Process Yellow 6 W FR Process Magenta 6 W FR Process Cyan 8 40 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

41 W FR Process Black 8 W Process Yellow 5 W Process Magenta 4 W FR Process Yellow 6 W FR Process Magenta 6 W Process Extender W W W5 NW16124 CARE73 CARE74 CARE75 RE198 CARE95 NWC10 Opaque Whites WB Opaque White Low slip. WB Opaque White II High slip. Shrink OP White TNV Opaque White Additives Stabilizer PH Adjuster Defoamer Slow Reducer Slip Additive Cleaner EZ Cleaner W700 Series Water Based Brewery Ink The W700 Series Water Based Brewery Ink was developed for labels used on returnable type bottles which under-go a washup cycle in Sodium Hydroxide solution. The W700 Series inks exhibit outstanding pressroom performance and stability. These inks are high strength at low viscosity Paper and metalized papers. Anilox Rolls: For standard colors use an anilox with a cell volume of 3.0 bcm bcm. For process colors use an anilox with a cell volume of bcm. Viscosity: On average sec., #3 77 F ph Range: Plates: This ink Series is compatible with most WB Flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. The ph and viscosity of the ink should be maintained during printing with the use of additives to adjust ph and viscosity, See the additive guide. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the Ink Series Material Safety Data Sheet for further instructions and warnings. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run. Fade Resistance: This ink series is designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. PRODUCT OFFERING Standard Colors: This Ink Series is available in 3bcm and 4bcm. Part numbers for the 3bcm are listed below. Part numbers for the 4 bcm are not shown but are available upon request. 4 Color Process: These inks are designed to print with anilox rolls having bcm. Also available in fade resistant (FR) colors. Standard Colors Opaque White Black Transparent White FR Process Blue (BW8) FR Green (BW8) FR Yellow (BW6) FR Orange (BW6) FR Warm Red (BW6) FR Rubine Red (BW6) FR Rhodamine Red FR Purple (BW8) FR Violet (BW8) FR Reflex Blue (BW8) Process Colors FR Process Yellow (BW6) 3bcm/PN W W W W W W W W W W W W W W U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 41

42 Water Based - Flexo FR Process Magenta (BW6) W FR Process Cyan (BW8) W FR Process Black (BW8) W Process Extender W original container; store separately to avoid contaminating unused ink. Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the Ink Series Material Safety Data Sheet for further instructions and warnings. Additives Stabilizer PH Adjuster Defoamer Print Aid Film CARE73 CARE74 CARE75 CARE77 Testing should be conducted at least 4 hours after printing to allow the properties of the ink to fully develop. After press/ job set up is complete, inspect a portion of the printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run. Reducers Slow Reducer Cleaner EZ Cleaner RE198 NWC10 W750 Series Water Based Polycoated Board Ink The W750 Series Water Based Polycoated Board Inks are developed for use on disposable beverage cups, cartons and containers manufactured from polycoated board. These inks have been specifically developed to have excellent water resistance and are ideal for use on cold cup and ice-cream containers. The W750 Series Water Based Cold Cup Inks exhibit outstanding pressroom performance and stability. These inks are high strength and low viscosity. Fade Resistance: This ink series is designed for interior applications only. The colors designated with (FR) use pigments which have extended fade resistance. PRODUCT OFFERING Process Colors: Standard process colors are formulated to print using anilox volumes of BCM. Base Colors: Standard base colors are designed to be high strength, and formulated to print using anilox volumes of BCM. The colors can be mixed together to achieve an unlimited number of strong vibrant colors. Packaging Per Container: Opaque White Base Transparent White Other Colors 11 lb, 50 lb, 500lb 8 lb, 40 lb, 400lb 9 lb, 45 lb, 450lb Polycoated board. Viscosity: On average sec, #3 77 F ph Range: Plates: This ink Series is compatible with most WB Flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. The ph and viscosity of the ink should be maintained during printing with the use of additives to adjust ph and viscosity, See the additive guide. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the 42 Base Printing Colors An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone: Black Transparent White Yellow Orange Warm Red Rubine Red FR Process Blue (BW8) FR Green (BW8) FR Violet (BW8) Process Colors Process Yellow Process Magenta FR Process Cyan (BW8) FR Process Black (BW8) W W W W W W W W W W W W W750064

43 Additives PH Adjuster Defoamer Cleaner EZ Cleaner CARE79 CARE75 NWC10 WM Series Water Based Metallic Inks The WM series is a Metallic Ink system that uses the latest in Water-base technology. The WM series utilizes pigment and binder technology that will exhibit a brilliant metallic effect. Paper, Paperboard, and various films. Film Weight: Recommend coat weight: wet pounds per 1000 square feet. Viscosity: On average sec., #3 76 F PRODUCT OFFERING Metalliic Printing Colors WM W/B Laminating Silver WM W/B Shrink P-873 Gold WM W/B Shrink 877 Silver WM W/B AP 871 Gold WM W/B AP 872 Gold WM W/B AP 873 Gold WM W/B AP 874 Gold WM W/B AP 875 Gold WM W/B AP 876 Gold WM WM 871 Gold WM WM 872 Gold WM WM 873 Gold WM WM 874 Gold WM WM 875 Gold WM WM 876 Bronze WM WM Bright Silver 40# ph Range: Plates: This ink Series is compatible with most WB Flexo plates on the market. Printing: This ink series is formulated to be press ready. Thoroughly mix the ink prior to printing. Use NWC10 EZ Cleaner Storage: Store tightly covered at temperatures between F (18-32 C). Ink taken from the press should not be returned to the original container; store separately to avoid contaminating unused ink. Ink Handling: Safety glasses and gloves are suggested in areas where product may be splashed. If product does come in contact with skin, wipe ink off with a clean, dry cloth (do not use solvent or reducer). Wash the affected area with soap and water. Consult the Ink Series Material Safety Data Sheet for further instructions and warnings. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance and gloss. These tests should be performed prior to beginning the full production run WM NWC10 Extenders & Cleaners WM Metallic Extender EZ Cleaner U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 43

44 Water Based - Coatings/Adhesives WV1000 WB GP Gloss Coating WV1000 is a general purpose high gloss water based coating formulated for application via flexo presses. Paper and board stocks and some Films. Target Viscocity: sec. /#3 25 C Gloss: ~70 (60 ) Rub: 500 Sutherland Rubs (4lb weight, face to face) ph: VOC: 0.7% Solids: 33-37% Other: FDA: Dry Film-21 CFR: , (with Limits), and Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV1100 WB Heat Resistant Lidding Coating WV1100 WB HR Lidding Coating is formulated for heat seal applications for Tag and Label printing. This coating is ideal where high heat resistance is needed. This ink is a water based flexo ink designed specifically for lids. This product has excellent rheology characteristics making it ideal for most printing equipment, and product applications. Paper, paperboard and foil stocks. Target Viscocity: sec. /#3 25 C Gloss: ~63 (60 ) Rub: 250 Sutherland Rubs (4lb weight, face to face) ph: Other: Heat Resistance: 70psi for 1.5 sec Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV Series WV1105 W/B ROP-DE CTG WV1105 ROP-DE Coating was developed for Moisture Res, Thermal Transfer Ribbons (Wax/Resin), Direct Thermal, and High Rub properties. Paper stock and Films Target Viscocity: sec/#2 70 F Resistance: Water and Alkali ph: VOC: <0.05 Solids: 37% ±1% Other: FDA: Dry Film-21 CFR: , (with Limits), and Drying: Sufficient volumes of warm air, medium or short wave I.R. It is recommended that you use an Anilox that will apply a wet ink film weight of lbs/msf to optimize coating performance. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. 44 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

45 stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV1106 WB Toy Spec Coating WV1106 W/B Toy Spec coating was formulated to pass the Toy manufacturing toxicity guidelines. Paper stock and Films. Target Viscocity: sec/# 3 70 F Rub: 600 rubs with 4lb weight Slide: COF: degrees on paper ph: VOC: 0.05 lb/gallon Drying: Sufficient volumes of warm air, medium or short wave I.R. It is recommended that you use an Anilox that will apply a wet ink film weight of lbs/msf to optimize coating performance. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. Drying: Sufficient volumes of warm air, medium or short wave I.R. It is recommended that you use an Anilox that will apply a dry coating weight 2-7 lbs 3000 sq. ft. to optimize coating performance. This product is formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV1111 W/B Primer WV1111 WB Primer is formulated for application via Flexo presses. When fully dried this primer exhibits good imprintability with good rub resistance. Paper and Paperboards. Target Viscocity: sec/#3 72 F Drying: Sufficient volumes of warm air, medium or short wave I.R. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV1107 WB Shrink Sleeve Adhesive Coating WV1107 is a Water based dispersion of high molecular polymers. WV1107 has a medium viscosity. WV1107 is suggested for use as a heat seal coating for bonding films, aluminum foil and paper to various substrates. The WV1107 is also used as a spot adhesive in Shrink Sleeve applications. FDA Status: This product meets the requirements of 21CFR Paper stock and Films. Target Viscocity: oF (only add water to reduce viscosity) ph: (do not adjust ph) Solids: 37% Other: Minimum heat activation range is F formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 45

46 Water Based - Coatings/Adhesives WV1113 WB HR Coating WV1113 WB HR Coating is formulated for flexo applications where a Heat Resistant, gloss, fast drying and block resistant coating is needed. Paper, Board and some flexible films. Target Viscocity: sec/#3 72 F Gloss: 64±3(60 ) Rub: 250 cycles face to face with 4# weight Resistance: Heat Resistant - 40psi / 400 F VOC: 0.18 (lb/gal) Solids: 37%±1% Other: Block Resistance face to face 2psi / 120 F. Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. are required when handling this material. Please consult MSDS for details on proper handling of this material. This product should be stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV Series WV1114 WB FDA Gloss Coating WV1114 is formulated for flexo applications where good gloss, fast drying, block resistance, low odor, water resistance is needed. This product is cleared for use in accordance with 21 C.F.R and And under certain conditions with Please contact Nazdar for specifics Plastic, Paper and Paperboard. Target Viscocity: sec/#2 76 F Gloss: 71±2(60 ) Rub: 500 cycles face to face with 4# weight VOC: 1.8% Solids: 37% ±1% Other: Block Resistance face to face F. Complete release Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV Series WV2002 WB Matte Imprintable Coating WV2002 is a water based imprintable matte coating formulated for application via flexo presses. Pressure sensitive vinyl, top coated and print treated polyester, BOPP films, polyethylene, polystyrene, paper and board. Target Viscocity: sec/#3 76 F Gloss: ~9 (60 ) Rub: 100 rubs with 4lb weight Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. friction. These tests should be performed prior to beginning the full production run. 46 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

47 stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. WV Series WV3000 WB Heat Seal Adhesive WV3000 is a heat sealable coating for blister pack applications. This adhesive has a sealing range of F. It features fast drying, good gloss and wetting over other inks. PVC and PETG films, paper and board stocks. Target Viscocity: sec/#3 76 F ph: ~ VOC: 13.3% Drying: Sufficient volumes of warm air, medium or short wave I.R. formulated to be press ready and can be printed over Nazdar Rotary Screen, UV Flexo and Water Base Flexo inks. printed web for all applicable and specified properties. These properties include but are not limited to: cure, adhesion, mar and rub resistance, product resistance, gloss, and coefficient of friction. These tests should be performed prior to beginning the full production run. Use NWC10 EZ Cleaner. stored tightly covered at temperatures between F (18-32 C). The product should be mixed prior to use. U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance InkAnswers@Nazdar.com 47

48 Index 6400 Series UV Flexo Ink Series UV LED Flexo Ink Series UV LED Flexo Metallic Ink NC Series Nestlé Compliant UV LED Flexo Ink Series UV Flexo Ink Series UV Rotary Screen Ink Series UV LED Rotary Screen Ink NCF Series UV Flexo Ink Series UV Flexo Ink Series UV Flexo Ink...17 F Flexo - UV Inks...14 Flexo - UV LED Inks... 6 Flexo - Water Based Inks...38 I Ink Answers... 4 L Letterpress UV Inks...21 O Offset UV Inks...21 OP1001 UV Flexo GP Varnish AF...23 OP1003 UV GP Varnish AF...23 OP1005 UV GP Gloss Varnish...23 OP1007 UV Gloss Resist Varnish...24 OP1008 UV Gloss Resist II Varnish...24 OP1009 UV Gloss Resist Varnish...24 OP1010 UV Gloss Flexo Varnish...25 OP1011 UV Gloss Flexo Varnish OP1012 UV Gloss M Varnish...26 OP1013 Combo Screen/Coater TC...26 OP1015 Gloss Roller Coat Clear...26 OP1016 UV GP Gloss OPV...27 OP1017 UV Gloss IMP Varnish...27 OP1019 UV Hot Stampable Primer...28 OP1021 UV Flexo DT OPV...28 OP1027 Premium Gloss OPV...29 OP1028 Premium Gloss HS OPV...29 OP1030 UV Gloss IMP Varnish II...29 OP1031 UV Gloss TT Imprintable Coating...29 OP1032 UV Scuff Resistant Gloss BPF...30 OP1103 UV Gloss Imprintable Varnish...30 OP1107 UV Flexo HP Digital Resistance OP Varnish...31 OP2001 UV Matte Varnish...31 OP2014 UV Matte Imprintable OPV...31 OP2015 UV Matte Varnish...32 OP2017 UV Scuff Resistant Matte BPF...32 OP2018 UV Matte Imprintable Varnish...32 OP3000 UV Laminating Adhesive...33 OP3003 UV Release Coating...33 OP3015 Laminating Adhesive...33 OP3016 Cold Foil Adhesive...34 OP3017 Peel & Release Adhesive...34 OP3018 Dry Peel Adhesive...34 OP3019 Laminating Adhesive...35 OP3020 Laminating Adhesive...35 OP61002 UV LED Gloss Imprintable Varnish...10 OP61003 UV LED Gloss Varnish...10 OP62001 UV LED Matte Varnish...10 OP63000 UV LED Laminating Adhesive...11 OP63016 UV LED Cold Foil Adhesive...11 OP69001 UV LED Release Varnish...12 OP8003 R/S Gloss Varnish...36 OPF1032 Scuff Resistant Gloss BP Free...36 OPF2017 Scuff Resistant Matte BPF...36 R Rotary Screen - UV Inks...15 Rotary Screen - UV LED Inks... 9 U UV Flexo Polar White Ink...16 UV Flexo Metallic Ink...18 UV Inks...13 UV Rotary Screen...19 UV Varnishes & Adhesives...23 UV LED Inks... 5 UV LED Varnishes & Adhesives...10 UV Letterpress...21 W W100 Series Water Based Flexo Paper Ink...38 W300 Series Water Based Flexo Ink...38 W510 Series Water Based Flexo Ink...40 W700 Series Water Based Brewery Ink...41 W750 Series Water Based Polycoated Board Ink...42 Water Based inks...37 Water Based Coatings & Adhesives...44 WM Series Water Based Metallic Inks...43 WV1000 WB GP Gloss Coating...44 WV1100 WB Heat Resistant Lidding Coating...44 WV Series WV1105 W/B ROP-DE CTG...44 WV1106 WB Toy Spec Coating...45 WV1107 WB Shrink Sleeve Adhesive Coating...45 WV1111 W/B Primer...45 WV1113 WB HR Coating...46 WV Series WV1114 WB FDA Gloss Coating...46 WV Series WV2002 WB Matte Imprintable Coating...46 WV Series WV3000 WB Heat Seal Adhesive An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

49 Notes: U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance 49

50 Notes: 50 An Ink That s Right For Every Job. Customer Service NazdarOrders@Nazdar.com U.S.A. Phone:

51 Notes: U.S. Phone: U.K. Phone: Mexico Phone: +52 (55) Technical Assistance 51

52 Distributor: Nazdar Ink Technologies - World Headquarters 8501 Hedge Lane Terrace Shawnee, KS USA Toll Free US: Tel: NazdarOrders@Nazdar.com Technical Support InkAnswers@Nazdar.com Nazdar EMEA Nazdar House, Battersea Road Heaton Mersey Industrial Estate Stockport, Chesire SK4 3EA United Kingdom Tel: + 44 (0) EMEA Technical Service TechnicalServiceUK@Nazdar.com Nazdar Asia Pacific 11, Changi North Street 1 #03-03/04 Singapore Tel: aspac@nazdar.com Nazdar Tlalnepantla Gustavo Baz 180 D-4 San Jeronimo Tepetlacalco Tlalnepantla, Edo. de Mexico Mexico Tel: +52 (55) Fax: +52 (55) Got ink questions We have ink answers. LIT Customer Service InkAnswers@Nadar.com NazdarOrders@Nazdar.com today Nazdar.com