FORMOSA PLASTICS CORPORATION. PVC Specification
|
|
- Asher Randell McDaniel
- 5 years ago
- Views:
Transcription
1 PVC Specification TYPE Grade K value Polymerization Degree Bulk Density (g/c.c) Volatile Matter (%) VAC contain % +42mesh Course particles % B ~ ± ± MASS PVC B ~ ± ± S ~ ± ± S-65S 64.6~ ± ± S-65F 64.6~ ± ± Suspension PVC S-65D 65.7~ ± ± S ~ ± ± S ~ ± ± S ~ ± ± Blending Resins SPR-D 63.0~ ± ± C ~ ± ± ± Copolymer C ~ ± ± ± Mat PVC C-1250M ~70 ~ ± Microsuspension PR-F 75.5~ ± ± PR-G 77.5~ ± ± Paste Resin PR ~ ± ± PR ~ ± ± Emulsion PR ~ ± ± PR ~ ± ± Test method: 1. K Value :DIN Polymerization degree Bulk Density Volatile Matter:JIS-K mesh course particles:% course particles on 42 mesh sieve
2 Application and Properties TYPE Grade Properties Application MASS PVC Suspension PVC Blending Resins B-57 B-60 S-60 S-65S S-65F S-65D S-70 S-75 S-80 SPR-D Mass PVC with excellent gelling and flow properties. Mass PVC with excellent gelling, high bulk density, high clarity and high initial color properities. Suspension Pvc with good gelling and very high transparancy properties. Suspension Pvc with good plasticizer absorption and good heat stability. Suspension Pvc with good plasticizer absorption and good heat stability. Suspension Pvc with high bulk density, and excellent initial color properties. Used for compounding with copolymer C-8 or C-15 to manufacture rigid sheet and tiles,especially used for transparent bottles manufactured by extrusion and injection stretch or nonstretch blow molding machines. Used for calendering process of rigid film,sheet and extrusion or injection mold articles. Used for extrusion,injection blow molding articles and calendering process of rigid film,sheet.it also used for pipe fitting. Due to the excellent initial color properties, especially used for transparent and white products. This resin is intended for soft application,flexible film,and other flexible articles. It also suit for cables and wires application. This resin is intended for rigid molding articles processing, particularly for extrusion process of rigid pipe with high extrusion quantity. Suspension Pvc with high porosity, Used for extrusion,injection molding and calendering or flexible good plasticizer absorption and good products, especially for wires and cables. electrical properties. Suspension Pvc with very high porosity and good plasticizer absorption. Used for calendering process of film and sheet with excellent mechanic and physical properties, especially suitable for high insulating wires and cables. Suspension Pvc with excellent Used for versatile process of excellent mechanical and high elastic porosity and high ratio of plasticizer purpose products. absorption enhance the flexibility and elasticity of finish products. Blending PVC resin with coarse particle size approximate 50um is used as viscosity depressing. SPR-D is mixed with paste resin such as PR-415,PR-450,PR-500, PR-1069 and PR-F to make floor covering,atomobile products and molding produxts such as dolls and toys,etc. Copolymer Mat PVC C-8 C-15 C-1250M Suspension VC/VAC copolymer with low melt viscosity. Suspension VC/VAC copolymer with very low melt viscosity,excellent flow properties. Lower gloss value as well as excellent dry mat surface finish. Used for the manufacture of rigid plates,tiles,printing inks,surface treatment agent,etc. Specially suitable for protective coatings, printing inks and tiles. Used for injection,calendering and extrusion of flexible products. Microsuspension PR-F PR-G Suitable viscosity, good air release, Foam leather, foaming products, gloves, toys and dolls. good faoming,excellent strength, excellent yield value and excellent Hegman scratch. Low viscosity and high transparency. Soft toy,dipping, rotational molding,slush molding and casting molding. Paste Resin PR-500 PR-450 High viscosity and good foaming. Foam leather and foaming product. Suitable viscosity,excellent foaming. Floor covering, wall covering, foam sheet, casting leather. Emulsion PR-415 Low viscosity, easy mold release and excellent heat stability. Doll, toy, boots and automobile accessories. PR-1069 Low viscosity,excellent mechanical property, abrasion resistance, water resistance and excellent clarity. Wear layer of floor covering, casting leather,top or surface, coating and toy. Packages: 1.Jumbo Bag:1.0 or 1.1MT packed in PP jumbo bag with pallet,containerized ship kg bags:25kg PP woven bag with PE inner bag or 25kg paper bag with laminated (without pallet).
3
4 FPC Suspension PVC Grade K value Polymerization Degree Bulk Density (g/c.c) Volatile Matter (%) S ~ ± ± Characteristic Suspension PVC with high porosity, good plasticizer absorption and good electrical properties. Application Used for extrusion, injection molding and calendering or flexible products, especially for wires and cables. S ~ ± ± S ~ ± ± S ~ ± ± Suspension PVC with very high porosity and good plasticizer absorption. Suspension PVC with excellent porosity and high ratio of plasticizer absorption enhance the flexibility and elasticity of finish products. Suspension PVC with excellent porosity and high ratio of plasticizer absorption enhance the flexibility and elasticity of finish products. Used for calendering process of film and sheet with excellent mechanic and physical properties, especially suitable for high insulating wires and cables. This resin is used for versatile process of excellent mechanical and high elastic purpose products. This resin is used for versatile process of excellent mechanical and high elastic purpose products. Test method K Value DIN Polymerization degree Bulk Density Volatile Matter JIS-K6721
5 FPC Copolymer PVC Grade K value Polymerization Degree Bulk Density (g/c.c) Volatile Matter (%) VAc contain % Characteris tic Application C ~ ± ± ±1.0 Suspension Used for the VC/VAc manufacture of copolymer rigid plates, tiles, with low melt printing inks, viscosity. surface treatment agent etc. C ~ ± ± ±1.0 C-15C 58.3~ ± ± ±1.0 Suspension VC/VAc copolymer with very low melt viscosity, excellent flow properties and Suspension good VC/VAc copolymer with very low melt viscosity. Specially suitable for protective coatings, printing inks and tiles Used for credit cards application. Test method K Value DIN Polymerization degree Bulk Density Volatile Matter JIS-K6721 Grade Polymerizati on Degree K-Valu e Volatile (%) Apparent Density (g/c.c) +42mesh Coarse Particles % Properties Application s C-1250M ~1250 ~ ±0.03 <0.01 Lower gloss value as well as excellent dry mat surface finish injection, calenderi ng, and extrusion of flexible products.
6 FPC Blending Resins Grade Polymer Degree K-Value Volatile Content (%) Vac Content (%) Bulk Density (g/c.c) Characteristic Application SPR-D 1000± ~ ±0.05 Blending PVC resin with coarse particle size approximate 50um is used as viscosity depressing PR-D is mixed with paste resin such as PR-415, PR-450, PR-500, PR-1069 and PR-F to make floor covering, automobile products and molding products such as dolls and toys etc.
7 NO.100, SHUI-GUAN RD., JEN-WU SHIANG, KAOHSIUNG COUNTY, TAIWAN R. O. Report No. : KA/2009/31242 Page : 1 of 24 *KA * The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Style/Item No. : Sample Receiving Date : Testing Period : WHITE POLYVINYL CHLORIDE LIN S /03/ /03/16 TO 2009/3/24 ========================================================================================== Test Result(s) : - Please see the next page(s) -
8 Test Result(s) PART NAME NO.1 : WHITE POLYVINYL CHLORIDE Report No. : KA/2009/31242 Page : 2 of 24 *KA * Test Item (s) Cadmium (Cd) mg/kg With reference to IEC 62321:2008. Determination of Cadmium by ICP-AES. Mercury (Hg) mg/kg With reference to IEC 62321:2008. Determination of Mercury by ICP-AES. Lead (Pb) mg/kg With reference to IEC 62321:2008. Determination of Lead by ICP-AES. Hexavalent Chromium Cr(VI) by alkaline extraction Unit mg/kg Method With reference to IEC 62321:2008. Determination of Hexavalent Chromium for non-metallic samples by UV/Vis Spectrometry. Result MDL No. 1 2 n.d. 2 n.d. 2 n.d. 2 n.d. Sum of PBBs - n.d. Monobromobiphenyl 5 n.d. Dibromobiphenyl 5 n.d. Tribromobiphenyl 5 n.d. Tetrabromobiphenyl With reference to IEC 62321: n.d. mg/kg Pentabromobiphenyl Determination of PBBs and PBDEs by 5 n.d. Hexabromobiphenyl GC/MS. 5 n.d. Heptabromobiphenyl 5 n.d. Octabromobiphenyl 5 n.d. Nonabromobiphenyl 5 n.d. Decabromobiphenyl 5 n.d. Sum of PBDEs - n.d. Monobromodiphenyl ether 5 n.d. Dibromodiphenyl ether 5 n.d. Tribromodiphenyl ether 5 n.d. Tetrabromodiphenyl ether With reference to IEC 62321: n.d. mg/kg Pentabromodiphenyl ether Determination of PBBs and PBDEs by 5 n.d. Hexabromodiphenyl ether GC/MS. 5 n.d. Heptabromodiphenyl ether 5 n.d. Octabromodiphenyl ether 5 n.d. Nonabromodiphenyl ether 5 n.d. Decabromodiphenyl ether 5 n.d.
9 Beryllium (Be) Cobalt dichloride*** Test Item (s) Unit Method Chlorinated Paraffin (C10~C13) (CAS NO.: ) PCBs (Polychlorinated Biphenyls) (CAS NO.: ) Polychlorinated Naphthalene PCTs (Polychlorinated Terphenyls) PERFLUOROOCTANE SULFONATES (PFOS) PFOS Acid PFOS Metal Salt PFOS Amide 2-(2-HYDROXY-3',5'-DI-T- BUTYLPHENYL)BENZOTRIAZOLE (CAS NO ) Formaldehyde (CAS NO.: ) PVC (CAS NO.: ) Asbestos Anthrophyllite (CAS NO ) Crocidolite (CAS NO ) Amosite (CAS NO ) Tremolite (CAS NO ) Chrysotile (CAS NO ) Actinolite (CAS NO ) mg/kg With reference to US EPA Analysis was performed by ICP-AES. mg/kg With reference to US EPA Analysis was performed by ICP-AES. % With reference to US EPA 3540 Analysis was performed by GC/ECD. mg/kg % % % % % % With reference to US EPA 3540 Analysis was performed by GC/ECD. mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to US EPA 3540C : 1996 method for PFOS Content. Analysis was performed by LC/MS. mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to DIN Analysis was performed by HPLC/DAD. ** Analysis was performed by FTIR and FLAME Test. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. Report No. : KA/2009/31242 Page : 3 of 24 *KA * Result MDL No. 1 2 n.d. 2 n.d n.d. 5 n.d. 0.5 n.d. 10 n.d. 10 n.d. - Positive 1 Negative 1 Negative 1 Negative 1 Negative 1 Negative 1 Negative
10 Test Item (s) Unit Method MDL Phthalates DEHP(Di-(2-ethylhexyl phthalate)) (CAS No ) DIDP(Di-isodecyl phthalate) (CAS No ) DNOP(Di-n-octyl phthalate) (CAS No ) DBP(Di-butyl phthalate) (CAS No ) BBP(Benzyl butyl phthalate) (CAS No ) DINP(Di-isononyl phthalate) (CAS No ) DHP(Di-hexyl phthalate) (CAS No ) Organic-TIN compounds Tributyl Tin(TBT) (CAS NO.: ) Triphenyl Tin(TphT) (CAS NO.: ) CHCs (Chlorinated hydrocarbon) 1,1,1,2-Tetrachloroethane (CAS NO.: ) 1,1,1-Trichloroethane (CAS NO.: ) 1,1,2,2-Tetrachloroethane (CAS NO.: ) 1,1,2-Trichloroethane (CAS NO.: ) 1,1-Dichloroethene (CAS NO.: ) 1,1-Dichloroethane (CAS NO.: ) 1,1-Dichloropropene (CAS NO.: ) 1,2,3-Trichloropropane (CAS NO.: ) 1,2-Dichloroethane (CAS NO.: ) % % % % % % % With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis mg/kg With reference to DIN Analysis was performed by GC/FPD. mg/kg With reference to DIN Analysis was performed by GC/FPD. Report No. : KA/2009/31242 Page : 4 of 24 *KA * Result No
11 Report No. : KA/2009/31242 Page : 5 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 1,2-Dichloropropane (CAS NO.: ) 1,3-Dichloropropane (CAS NO.: ) 2,2-Dichloropropane (CAS NO.: ) Chloroethane (CAS NO.: ) Chloroform (CAS NO.: ) Chloromethane (CAS NO.: ) Cis-1,2-Dichloroethene (CAS NO.: ) Cis-1,3-Dichloropropene (CAS NO.: ) Hexachlorobutadiene (CAS NO.: ) Methylene Chloride (CAS NO.: ) trans-1,2-dichloroethene (CAS NO.: ) trans-1,3-dichloropropene (CAS NO.: ) Trichloroethylene (CAS NO.: ) Carbon Tetrachloride Methyl Chloroform Hydrofluorcarbon, fluorinated hydrocarbon, fluorohydrocarbon (HFC) HFC-23 (CHF3) HFC-32 (CH2F2)
12 Report No. : KA/2009/31242 Page : 6 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HFC-41 (CH3F) HFC-43-10mee (C5H2F10) HFC-125 (C2HF5) HFC-134 (C2H2F4) HFC-134a (CH2FCF3) HFC-143 (C2H3F3) HFC-143a (C2H3F3) HFC-152a (C2H4F2) HFC-227ea (C3HF7) HFC-236cb (CH2FCF2CF3) HFC-236fa (C3H2F6) HFC-236ea (CHF2CHFCF3) HFC-245ca (C3H3F5) HFC-245fa (CHF2CH2CF3) HFC-365mfc (CF3CH2CF2CH3) PERFLUOROCARBON(PFC) F14 Fluorocarbon 116
13 Report No. : KA/2009/31242 Page : 7 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Freon 218 Decafluorobutane Freon C 318 Perfluoro-1-butene Perfluoroisobutene 1,4-Dihydrooctafluorobutane Nonafluoro-2- (trifluoromethyl)butane Perfluoro-n-pentane 2-Perfluoromethylpentane Perfluorohexane CFCs(Chlorofluorocarbons) & HALON Chlorofluorocarbon-11 (CAS NO.: ) Chlorofluorocarbon-12 (CAS NO.: ) Chlorofluorocarbon-113 (CAS NO.: ) Chlorofluorocarbon-114 (CAS NO.: ) Chlorofluorocarbon-115 (CAS NO.: ) Chlorofluorocarbon-13 (CAS NO.: ) Chlorofluorocarbon-111 (CAS NO.: ) Chlorofluorocarbon-112 (CAS NO.: )
14 Report No. : KA/2009/31242 Page : 8 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Chlorofluorocarbon-211 (CAS NO.: ) Chlorofluorocarbon-212 (CAS NO.: ) Chlorofluorocarbon-213 (CAS NO.: ) Chlorofluorocarbon-214 (CAS NO.: ) Chlorofluorocarbon-215 (CAS NO.: ) Chlorofluorocarbon-216 (CAS NO.: ) Chlorofluorocarbon-217 (CAS NO.: ) HALON-1211 HALON-1301 HALON-2402 HCFC's (Hydrogenated Hydrochlorofluorocarbon-21 (CAS NO.: ) Hydrochlorofluorocarbon-22 (CAS NO.: ) Hydrochlorofluorocarbon-31 (CAS NO.: ) Hydrochlorofluorocarbon-121 (CAS NO.: ) Hydrochlorofluorocarbon-122 (CAS NO.: ) Hydrochlorofluorocarbon-123 (CAS NO.: ) Hydrochlorofluorocarbon-124 (CAS NO.: ) Hydrochlorofluorocarbon-131 (CAS NO.: ) mg/kg With reference to US EPA Analysis
15 Report No. : KA/2009/31242 Page : 9 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Hydrochlorofluorocarbon-132 (CAS NO.: ) Hydrochlorofluorocarbon-133 (CAS NO.: ) Hydrochlorofluorocarbon-141 (CAS NO.: ) Hydrochlorofluorocarbon-141b (CAS NO.: ) Hydrochlorofluorocarbon-142 (CAS NO.: ) Hydrochlorofluorocarbon-142b (CAS NO.: ) Hydrochlorofluorocarbon-151 (CAS NO.: ) Hydrochlorofluorocarbon-221 (CAS NO.: ) Hydrochlorofluorocarbon-222 (CAS NO.: ) Hydrochlorofluorocarbon-223 (CAS NO.: ) Hydrochlorofluorocarbon-224 (CAS NO.: ) Hydrochlorofluorocarbon-225 (CAS NO.: ) Hydrochlorofluorocarbon-225ca (CAS NO.: ) Hydrochlorofluorocarbon-225cb (CAS NO.: ) Hydrochlorofluorocarbon-226 (CAS NO.: ) Hydrochlorofluorocarbon-231 (CAS NO.: ) Hydrochlorofluorocarbon-232 (CAS NO.: ) Hydrochlorofluorocarbon-233 (CAS NO.: )
16 Report No. : KA/2009/31242 Page : 10 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Hydrochlorofluorocarbon-234 (CAS NO.: ) Hydrochlorofluorocarbon-235 (CAS NO.: ) Hydrochlorofluorocarbon-241 (CAS NO.: ) Hydrochlorofluorocarbon-242 (CAS NO.: ) Hydrochlorofluorocarbon-243 (CAS NO.: ) Hydrochlorofluorocarbon-244 (CAS NO.: ) Hydrochlorofluorocarbon-251 (CAS NO.: ) Hydrochlorofluorocarbon-252 (CAS NO.: ) Hydrochlorofluorocarbon-253 (CAS NO.: ) Hydrochlorofluorocarbon-261 (CAS NO.: ) Hydrochlorofluorocarbon-262 (CAS NO.: ) Hydrochlorofluorocarbon-271 (CAS NO.: ) HBFC's (Hydrogenated bromofluorocarbons) HBFC-21B2 HBFC-22B1 HBFC-31B1 HBFC-121B4 HBFC-122B3
17 Report No. : KA/2009/31242 Page : 11 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HBFC-123B2 HBFC-124B1 HBFC-131B3 HBFC-132B2 HBFC-133B1 HBFC-141B2 HBFC-142B1 HBFC-151B1 HBFC-221B6 HBFC-222B5 HBFC-223B4 HBFC-224B3 HBFC-225B2 HBFC-226B1 HBFC-231B5 HBFC-232B4 HBFC-233B3 HBFC-234B2
18 Report No. : KA/2009/31242 Page : 12 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HBFC-235B1 HBFC-241B4 HBFC-242B3 HBFC-243B2 HBFC-244B1 HBFC-251B3 HBFC-252B2 HBFC-253B1 HBFC-261B2 HBFC-262B1 HBFC-271B1 Bromomethane AZO 1):4-AMINODIPHENYL mg/kg With reference to LMBG Analysis (CAS NO ) 2):BENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 3):4-CHLORO-O-TOLUIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 4):2-NAPHTHYLAMINE mg/kg With reference to LMBG Analysis (CAS NO ) 5):O-AMINO-AZOTOLUENE mg/kg With reference to LMBG Analysis (CAS NO ) 6):2-AMINO-4-NITROTOLUENE (CAS NO ) mg/kg With reference to LMBG Analysis
19 Report No. : KA/2009/31242 Page : 13 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 7):P-CHLOROANILINE mg/kg With reference to LMBG Analysis (CAS NO ) 8):2,4-DIAMINOANISOLE mg/kg With reference to LMBG Analysis (CAS NO ) 9):4,4- mg/kg With reference to LMBG Analysis DIAMINODIPHENYLMETHANE 10):3,3-DICHLOROBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 11):3,3-DIMETHOXYBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 12):3,3-DIMETHYLBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 13):3,3-DIMETHYL- 4,4- DIAMINODIPHENYLMETHA mg/kg With reference to LMBG Analysis 14):P-CRESIDINE (2-METHOXY-5- METHYLANILINE) 15):4,4-METHYLENE-BIS- (2-CHLORANILINE) (CAS NO ) 16):4,4-OXYDIANILINE (CAS NO ) 17):4,4-THIODIANILINE (CAS NO ) 18):O-TOLUIDINE (CAS NO ) 19):2-4-TOLUYLENDIAMINE (CAS NO ) 20):2,4,5-TRIMETHYLANILINE (CAS NO ) 21):O-ANISIDINE (CAS NO ) 22):P-AMINOAZOBENZENE (CAS NO ) 23):2,4-XYLIDINE (CAS NO ) 24):2,6-XYLIDINE (CAS NO ) mg/kg mg/kg With reference to LMBG Analysis With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Z. Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis
20 Report No. : KA/2009/31242 Page : 14 of 24 *KA * Note: 1. mg/kg = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated 5. The exemption of DecaBDE in polymeric application according 2005/717/EC was overruled by the European Court of Justice by its decision of Subsequently DecaBDE will be included in the sum of PBDE after ** = Qualitative analysis (No Unit) 7. Negative = Undetectable / Positive = Detectable 8. Amending for the 22nd Council Directive 76/769/EEC notified under document 2005/84/EC, total concentration of three compounds DEHP, DBP and BBP shall not be greater than 0.1% and total concentration of three compounds DINP, DIDP and DNOP shall not be greater than 0.1%. 9. ***The substance is calculated by the test results of Cobalt. The MDL is evaluated forcobalt or Phosphorus respectively.) 10. The Asbestos test was subcontracted to other SGS Laboratory. 11. The PVC & ASBESTOS test was subcontracted to other SGS Laboratory. PFOS Reference Information : Directive 2006/122/EC (1) May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than % by mass. (2) May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m 2 of the coated material. 4. The sample(s) was/were analyzed on behalf of the applicant as mixing sample in one testing. The above result(s) was/were only given as the informality value. 15. This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 16. This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information.
21 Report No. : KA/2009/31242 Page : 15 of 24 *KA * 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr6+ test method excluded) 2) Name of the person who made measurement: Hungming Li 3) Name of the person in charge of measurement: Ray Chang Cutting / Preparation XRF Screening Sample Measurement Pb Cd Hg Microwave digestion with HNO 3 /HCl/HF Cr 6+ Add appropriate amount of digestion reagent Filtration Heat to appropriate temperature to extract Solution Residue Cool, filter digestate through filter 1) Alkali Fusion 2) HCl to dissolve Add diphenyl-carbazide for color development ICP-AES measure the absorbance at 540 nm by UV-VIS
22 Report No. : KA/2009/31242 Page : 16 of 24 *KA * PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report
23 Report No. : KA/2009/31242 Page : 17 of 24 *KA * Analysis flow chart for determination of PVC in polymer material 1) Name of the person who made measurement: Joyce Chiu 2) Name of the person in charge of measurement: Roger Lin Sample pre-treatment Flame test Sample analyzed by FTIR Check wave-number of C-Cl bond Data
24 Report No. : KA/2009/31242 Page : 18 of 24 *KA * Analytical flow chart of benzotriazole content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by soxhlet method (Reference method US EPA 3540) Concentrate/Dilute Extracted solution Analysis was performed by GC/MS Data
25 Report No. : KA/2009/31242 Page : 19 of 24 *KA * Chlorinated Flame retardant analytical flow chart 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Reference method: US EPA 8270D, US EPA 3540 Test Items: PCNs, PCTs, Mirex Sample pretreatment Sample extraction by organic solvent Concentrate/Dilute the extracted solution Analysis was performed by GC/MS Data
26 Report No. : KA/2009/31242 Page : 20 of 24 *KA * Chlorinated Flame retardant analytical flow chart 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Reference method: USEPA 3540 Test Items: PCBs, CP, MCCP Sample pretreatment Sample extraction by organic solvent Concentrate/Dilute the extracted solution Analysis was performed by GC/ECD Data
27 Report No. : KA/2009/31242 Page : 21 of 24 *KA * Analytical flow chart of PFOS content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by Soxhlet extraction (Reference method US EPA 3540) Concentrate/Dilute Extracted solution Analysis was performed by LC/MS Data
28 Report No. : KA/2009/31242 Page : 22 of 24 *KA * Analysis flow chart for determination of Asbestos 1) Name of the person who made measurement: Victor Kao 2) Name of the person in charge of measurement: James Lu Sampling Sample pretreatment / Separation Preparation of primary analytical sample X-ray diffraction qualitative analysis Diffraction peak of asbestos is present Diffraction peak of asbestos is absent Positive Negative
29 Report No. : KA/2009/31242 Page : 23 of 24 *KA * Analytical flow chart of Organic-Tin content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by organic solvent Derived by Sodium tetraethylborate Concentrate/Dilute Extracted solution Analysis was performed by GC/FPD Data
30 NO.100, SHUI-GUAN RD., JEN-WU SHIANG, KAOHSIUNG COUNTY, TAIWAN R. O. Report No. : KA/2009/31242 Page : 24 of 24 *KA * ** End of Report **
31 NO.100, SHUI-GUAN RD., JEN-WU SHIANG, KAOHSIUNG COUNTY, TAIWAN R. O. Report No. : KA/2009/31248 Page : 1 of 24 *KA * The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Style/Item No. : Sample Receiving Date : Testing Period : WHITE POLYVINYL CHLORIDE ML S /03/ /03/16 TO 2009/3/24 ========================================================================================== Test Result(s) : - Please see the next page(s) -
32 Test Result(s) PART NAME NO.1 : WHITE POLYVINYL CHLORIDE Report No. : KA/2009/31248 Page : 2 of 24 *KA * Test Item (s) Cadmium (Cd) mg/kg With reference to IEC 62321:2008. Determination of Cadmium by ICP-AES. Mercury (Hg) mg/kg With reference to IEC 62321:2008. Determination of Mercury by ICP-AES. Lead (Pb) mg/kg With reference to IEC 62321:2008. Determination of Lead by ICP-AES. Hexavalent Chromium Cr(VI) by alkaline extraction Unit mg/kg Method With reference to IEC 62321:2008. Determination of Hexavalent Chromium for non-metallic samples by UV/Vis Spectrometry. Result MDL No. 1 2 n.d. 2 n.d. 2 n.d. 2 n.d. Sum of PBBs - n.d. Monobromobiphenyl 5 n.d. Dibromobiphenyl 5 n.d. Tribromobiphenyl 5 n.d. Tetrabromobiphenyl With reference to IEC 62321: n.d. mg/kg Pentabromobiphenyl Determination of PBBs and PBDEs by 5 n.d. Hexabromobiphenyl GC/MS. 5 n.d. Heptabromobiphenyl 5 n.d. Octabromobiphenyl 5 n.d. Nonabromobiphenyl 5 n.d. Decabromobiphenyl 5 n.d. Sum of PBDEs - n.d. Monobromodiphenyl ether 5 n.d. Dibromodiphenyl ether 5 n.d. Tribromodiphenyl ether 5 n.d. Tetrabromodiphenyl ether With reference to IEC 62321: n.d. mg/kg Pentabromodiphenyl ether Determination of PBBs and PBDEs by 5 n.d. Hexabromodiphenyl ether GC/MS. 5 n.d. Heptabromodiphenyl ether 5 n.d. Octabromodiphenyl ether 5 n.d. Nonabromodiphenyl ether 5 n.d. Decabromodiphenyl ether 5 n.d.
33 Beryllium (Be) Cobalt dichloride*** Test Item (s) Unit Method Chlorinated Paraffin (C10~C13) (CAS NO.: ) PCBs (Polychlorinated Biphenyls) (CAS NO.: ) Polychlorinated Naphthalene PCTs (Polychlorinated Terphenyls) PERFLUOROOCTANE SULFONATES (PFOS) PFOS Acid PFOS Metal Salt PFOS Amide 2-(2-HYDROXY-3',5'-DI-T- BUTYLPHENYL)BENZOTRIAZOLE (CAS NO ) Formaldehyde (CAS NO.: ) PVC (CAS NO.: ) Asbestos Anthrophyllite (CAS NO ) Crocidolite (CAS NO ) Amosite (CAS NO ) Tremolite (CAS NO ) Chrysotile (CAS NO ) Actinolite (CAS NO ) mg/kg With reference to US EPA Analysis was performed by ICP-AES. mg/kg With reference to US EPA Analysis was performed by ICP-AES. % With reference to US EPA 3540 Analysis was performed by GC/ECD. mg/kg % % % % % % With reference to US EPA 3540 Analysis was performed by GC/ECD. mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to US EPA 3540C : 1996 method for PFOS Content. Analysis was performed by LC/MS. mg/kg With reference to US EPA 3540 Analysis mg/kg With reference to DIN Analysis was performed by HPLC/DAD. ** Analysis was performed by FTIR and FLAME Test. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. As per NIOSH 9000 method. Analysis was performed by XRD. Report No. : KA/2009/31248 Page : 3 of 24 *KA * Result MDL No. 1 2 n.d. 2 n.d n.d. 5 n.d. 0.5 n.d. 10 n.d. 10 n.d. - Positive 1 Negative 1 Negative 1 Negative 1 Negative 1 Negative 1 Negative
34 Test Item (s) Unit Method MDL Phthalates DEHP(Di-(2-ethylhexyl phthalate)) (CAS No ) DIDP(Di-isodecyl phthalate) (CAS No ) DNOP(Di-n-octyl phthalate) (CAS No ) DBP(Di-butyl phthalate) (CAS No ) BBP(Benzyl butyl phthalate) (CAS No ) DINP(Di-isononyl phthalate) (CAS No ) DHP(Di-hexyl phthalate) (CAS No ) Organic-TIN compounds Tributyl Tin(TBT) (CAS NO.: ) Triphenyl Tin(TphT) (CAS NO.: ) CHCs (Chlorinated hydrocarbon) 1,1,1,2-Tetrachloroethane (CAS NO.: ) 1,1,1-Trichloroethane (CAS NO.: ) 1,1,2,2-Tetrachloroethane (CAS NO.: ) 1,1,2-Trichloroethane (CAS NO.: ) 1,1-Dichloroethene (CAS NO.: ) 1,1-Dichloroethane (CAS NO.: ) 1,1-Dichloropropene (CAS NO.: ) 1,2,3-Trichloropropane (CAS NO.: ) 1,2-Dichloroethane (CAS NO.: ) % % % % % % % With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis With reference to EN : 2004 method. Analysis mg/kg With reference to DIN Analysis was performed by GC/FPD. mg/kg With reference to DIN Analysis was performed by GC/FPD. Report No. : KA/2009/31248 Page : 4 of 24 *KA * Result No
35 Report No. : KA/2009/31248 Page : 5 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 1,2-Dichloropropane (CAS NO.: ) 1,3-Dichloropropane (CAS NO.: ) 2,2-Dichloropropane (CAS NO.: ) Chloroethane (CAS NO.: ) Chloroform (CAS NO.: ) Chloromethane (CAS NO.: ) Cis-1,2-Dichloroethene (CAS NO.: ) Cis-1,3-Dichloropropene (CAS NO.: ) Hexachlorobutadiene (CAS NO.: ) Methylene Chloride (CAS NO.: ) trans-1,2-dichloroethene (CAS NO.: ) trans-1,3-dichloropropene (CAS NO.: ) Trichloroethylene (CAS NO.: ) Carbon Tetrachloride Methyl Chloroform Hydrofluorcarbon, fluorinated hydrocarbon, fluorohydrocarbon (HFC) HFC-23 (CHF3) HFC-32 (CH2F2)
36 Report No. : KA/2009/31248 Page : 6 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HFC-41 (CH3F) HFC-43-10mee (C5H2F10) HFC-125 (C2HF5) HFC-134 (C2H2F4) HFC-134a (CH2FCF3) HFC-143 (C2H3F3) HFC-143a (C2H3F3) HFC-152a (C2H4F2) HFC-227ea (C3HF7) HFC-236cb (CH2FCF2CF3) HFC-236fa (C3H2F6) HFC-236ea (CHF2CHFCF3) HFC-245ca (C3H3F5) HFC-245fa (CHF2CH2CF3) HFC-365mfc (CF3CH2CF2CH3) PERFLUOROCARBON(PFC) F14 Fluorocarbon 116
37 Report No. : KA/2009/31248 Page : 7 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Freon 218 Decafluorobutane Freon C 318 Perfluoro-1-butene Perfluoroisobutene 1,4-Dihydrooctafluorobutane Nonafluoro-2- (trifluoromethyl)butane Perfluoro-n-pentane 2-Perfluoromethylpentane Perfluorohexane CFCs(Chlorofluorocarbons) & HALON Chlorofluorocarbon-11 (CAS NO.: ) Chlorofluorocarbon-12 (CAS NO.: ) Chlorofluorocarbon-113 (CAS NO.: ) Chlorofluorocarbon-114 (CAS NO.: ) Chlorofluorocarbon-115 (CAS NO.: ) Chlorofluorocarbon-13 (CAS NO.: ) Chlorofluorocarbon-111 (CAS NO.: ) Chlorofluorocarbon-112 (CAS NO.: )
38 Report No. : KA/2009/31248 Page : 8 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Chlorofluorocarbon-211 (CAS NO.: ) Chlorofluorocarbon-212 (CAS NO.: ) Chlorofluorocarbon-213 (CAS NO.: ) Chlorofluorocarbon-214 (CAS NO.: ) Chlorofluorocarbon-215 (CAS NO.: ) Chlorofluorocarbon-216 (CAS NO.: ) Chlorofluorocarbon-217 (CAS NO.: ) HALON-1211 HALON-1301 HALON-2402 HCFC's (Hydrogenated Hydrochlorofluorocarbon-21 (CAS NO.: ) Hydrochlorofluorocarbon-22 (CAS NO.: ) Hydrochlorofluorocarbon-31 (CAS NO.: ) Hydrochlorofluorocarbon-121 (CAS NO.: ) Hydrochlorofluorocarbon-122 (CAS NO.: ) Hydrochlorofluorocarbon-123 (CAS NO.: ) Hydrochlorofluorocarbon-124 (CAS NO.: ) Hydrochlorofluorocarbon-131 (CAS NO.: ) mg/kg With reference to US EPA Analysis
39 Report No. : KA/2009/31248 Page : 9 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Hydrochlorofluorocarbon-132 (CAS NO.: ) Hydrochlorofluorocarbon-133 (CAS NO.: ) Hydrochlorofluorocarbon-141 (CAS NO.: ) Hydrochlorofluorocarbon-141b (CAS NO.: ) Hydrochlorofluorocarbon-142 (CAS NO.: ) Hydrochlorofluorocarbon-142b (CAS NO.: ) Hydrochlorofluorocarbon-151 (CAS NO.: ) Hydrochlorofluorocarbon-221 (CAS NO.: ) Hydrochlorofluorocarbon-222 (CAS NO.: ) Hydrochlorofluorocarbon-223 (CAS NO.: ) Hydrochlorofluorocarbon-224 (CAS NO.: ) Hydrochlorofluorocarbon-225 (CAS NO.: ) Hydrochlorofluorocarbon-225ca (CAS NO.: ) Hydrochlorofluorocarbon-225cb (CAS NO.: ) Hydrochlorofluorocarbon-226 (CAS NO.: ) Hydrochlorofluorocarbon-231 (CAS NO.: ) Hydrochlorofluorocarbon-232 (CAS NO.: ) Hydrochlorofluorocarbon-233 (CAS NO.: )
40 Report No. : KA/2009/31248 Page : 10 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 Hydrochlorofluorocarbon-234 (CAS NO.: ) Hydrochlorofluorocarbon-235 (CAS NO.: ) Hydrochlorofluorocarbon-241 (CAS NO.: ) Hydrochlorofluorocarbon-242 (CAS NO.: ) Hydrochlorofluorocarbon-243 (CAS NO.: ) Hydrochlorofluorocarbon-244 (CAS NO.: ) Hydrochlorofluorocarbon-251 (CAS NO.: ) Hydrochlorofluorocarbon-252 (CAS NO.: ) Hydrochlorofluorocarbon-253 (CAS NO.: ) Hydrochlorofluorocarbon-261 (CAS NO.: ) Hydrochlorofluorocarbon-262 (CAS NO.: ) Hydrochlorofluorocarbon-271 (CAS NO.: ) HBFC's (Hydrogenated bromofluorocarbons) HBFC-21B2 HBFC-22B1 HBFC-31B1 HBFC-121B4 HBFC-122B3
41 Report No. : KA/2009/31248 Page : 11 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HBFC-123B2 HBFC-124B1 HBFC-131B3 HBFC-132B2 HBFC-133B1 HBFC-141B2 HBFC-142B1 HBFC-151B1 HBFC-221B6 HBFC-222B5 HBFC-223B4 HBFC-224B3 HBFC-225B2 HBFC-226B1 HBFC-231B5 HBFC-232B4 HBFC-233B3 HBFC-234B2
42 Report No. : KA/2009/31248 Page : 12 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 HBFC-235B1 HBFC-241B4 HBFC-242B3 HBFC-243B2 HBFC-244B1 HBFC-251B3 HBFC-252B2 HBFC-253B1 HBFC-261B2 HBFC-262B1 HBFC-271B1 Bromomethane AZO 1):4-AMINODIPHENYL mg/kg With reference to LMBG Analysis (CAS NO ) 2):BENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 3):4-CHLORO-O-TOLUIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 4):2-NAPHTHYLAMINE mg/kg With reference to LMBG Analysis (CAS NO ) 5):O-AMINO-AZOTOLUENE mg/kg With reference to LMBG Analysis (CAS NO ) 6):2-AMINO-4-NITROTOLUENE (CAS NO ) mg/kg With reference to LMBG Analysis
43 Report No. : KA/2009/31248 Page : 13 of 24 *KA * Test Item (s) Unit Method MDL Result No. 1 7):P-CHLOROANILINE mg/kg With reference to LMBG Analysis (CAS NO ) 8):2,4-DIAMINOANISOLE mg/kg With reference to LMBG Analysis (CAS NO ) 9):4,4- mg/kg With reference to LMBG Analysis DIAMINODIPHENYLMETHANE 10):3,3-DICHLOROBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 11):3,3-DIMETHOXYBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 12):3,3-DIMETHYLBENZIDINE mg/kg With reference to LMBG Analysis (CAS NO ) 13):3,3-DIMETHYL- 4,4- DIAMINODIPHENYLMETHA mg/kg With reference to LMBG Analysis 14):P-CRESIDINE (2-METHOXY-5- METHYLANILINE) 15):4,4-METHYLENE-BIS- (2-CHLORANILINE) (CAS NO ) 16):4,4-OXYDIANILINE (CAS NO ) 17):4,4-THIODIANILINE (CAS NO ) 18):O-TOLUIDINE (CAS NO ) 19):2-4-TOLUYLENDIAMINE (CAS NO ) 20):2,4,5-TRIMETHYLANILINE (CAS NO ) 21):O-ANISIDINE (CAS NO ) 22):P-AMINOAZOBENZENE (CAS NO ) 23):2,4-XYLIDINE (CAS NO ) 24):2,6-XYLIDINE (CAS NO ) mg/kg mg/kg With reference to LMBG Analysis With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Z. Analysis mg/kg With reference to LMBG Analysis mg/kg With reference to LMBG Analysis
44 Report No. : KA/2009/31248 Page : 14 of 24 *KA * Note: 1. mg/kg = ppm;0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated 5. The exemption of DecaBDE in polymeric application according 2005/717/EC was overruled by the European Court of Justice by its decision of Subsequently DecaBDE will be included in the sum of PBDE after ** = Qualitative analysis (No Unit) 7. Negative = Undetectable / Positive = Detectable 8. Amending for the 22nd Council Directive 76/769/EEC notified under document 2005/84/EC, total concentration of three compounds DEHP, DBP and BBP shall not be greater than 0.1% and total concentration of three compounds DINP, DIDP and DNOP shall not be greater than 0.1%. 9. ***The substance is calculated by the test results of Cobalt. The MDL is evaluated forcobalt or Phosphorus respectively.) 10. The Asbestos test was subcontracted to other SGS Laboratory. 11. The PVC & ASBESTOS test was subcontracted to other SGS Laboratory. PFOS Reference Information : Directive 2006/122/EC (1) May not be placed on the market or used as a substance or constituent of preparations in a concentration equal to or higher than % by mass. (2) May not be placed on the market in semi-finished products or articles, or parts thereof, if the concentration of PFOS is equal to or higher than 0.1 % by mass calculated with reference to the mass of structurally or microstructurally distinct parts that contain PFOS or, for textiles or other coated materials, if the amount of PFOS is equal to or higher than 1µg/m 2 of the coated material. 4. The sample(s) was/were analyzed on behalf of the applicant as mixing sample in one testing. The above result(s) was/were only given as the informality value. 15. This report supersedes all pervious documents bearing the test report number KA/200X/XXXXX. 16. This is the additional test report of KA/200X/XXXXX which was issued on yyyy/mm/dd. Please refer to KA/200X/XXXXX for original information.
45 Report No. : KA/2009/31248 Page : 15 of 24 *KA * 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. (Cr6+ test method excluded) 2) Name of the person who made measurement: Hungming Li 3) Name of the person in charge of measurement: Ray Chang Cutting / Preparation XRF Screening Sample Measurement Pb Cd Hg Microwave digestion with HNO 3 /HCl/HF Cr 6+ Add appropriate amount of digestion reagent Filtration Heat to appropriate temperature to extract Solution Residue Cool, filter digestate through filter 1) Alkali Fusion 2) HCl to dissolve Add diphenyl-carbazide for color development ICP-AES measure the absorbance at 540 nm by UV-VIS
46 Report No. : KA/2009/31248 Page : 16 of 24 *KA * PBB/PBDE analytical FLOW CHART 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang First testing process Optional screen process Confirmation process Sample Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report
47 Report No. : KA/2009/31248 Page : 17 of 24 *KA * Analysis flow chart for determination of PVC in polymer material 1) Name of the person who made measurement: Joyce Chiu 2) Name of the person in charge of measurement: Roger Lin Sample pre-treatment Flame test Sample analyzed by FTIR Check wave-number of C-Cl bond Data
48 Report No. : KA/2009/31248 Page : 18 of 24 *KA * Analytical flow chart of benzotriazole content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by soxhlet method (Reference method US EPA 3540) Concentrate/Dilute Extracted solution Analysis was performed by GC/MS Data
49 Report No. : KA/2009/31248 Page : 19 of 24 *KA * Chlorinated Flame retardant analytical flow chart 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Reference method: US EPA 8270D, US EPA 3540 Test Items: PCNs, PCTs, Mirex Sample pretreatment Sample extraction by organic solvent Concentrate/Dilute the extracted solution Analysis was performed by GC/MS Data
50 Report No. : KA/2009/31248 Page : 20 of 24 *KA * Chlorinated Flame retardant analytical flow chart 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Reference method: USEPA 3540 Test Items: PCBs, CP, MCCP Sample pretreatment Sample extraction by organic solvent Concentrate/Dilute the extracted solution Analysis was performed by GC/ECD Data
51 Report No. : KA/2009/31248 Page : 21 of 24 *KA * Analytical flow chart of PFOS content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by Soxhlet extraction (Reference method US EPA 3540) Concentrate/Dilute Extracted solution Analysis was performed by LC/MS Data
52 Report No. : KA/2009/31248 Page : 22 of 24 *KA * Analysis flow chart for determination of Asbestos 1) Name of the person who made measurement: Victor Kao 2) Name of the person in charge of measurement: James Lu Sampling Sample pretreatment / Separation Preparation of primary analytical sample X-ray diffraction qualitative analysis Diffraction peak of asbestos is present Diffraction peak of asbestos is absent Positive Negative
53 Report No. : KA/2009/31248 Page : 23 of 24 *KA * Analytical flow chart of Organic-Tin content 1) Name of the person who made measurement: Anson Tsao 2) Name of the person in charge of measurement: Ray Chang Sample pretreatment Sample extraction by organic solvent Derived by Sodium tetraethylborate Concentrate/Dilute Extracted solution Analysis was performed by GC/FPD Data
54 NO.100, SHUI-GUAN RD., JEN-WU SHIANG, KAOHSIUNG COUNTY, TAIWAN R. O. Report No. : KA/2009/31248 Page : 24 of 24 *KA * ** End of Report **
The following merchandise was (were) submitted and identified by the client as :
Page : 1 of 13 The following merchandise was (were) submitted and identified by the client as : Type of Product : Style/Item No : Sample Received : Testing Date : RESISTOR PRODUCTS RESISTOR ARRAY & NETWORK
More informationPage : 2 of 26 Test Result(s) PART NAME No.1 : YELLOW SHEET Cadmium (Cd) Lead (Pb) Mercury (Hg) Antimony (Sb) Test Item(s) Hexavalent Chromium Cr(VI)
Page : 1 of 26 The following samples was/were submitted and identified by/on behalf of the applicant as : Sample Submitted By Sample Description Style/Item No. Sample Receiving Date Testing Period : :
More informationTest Report No. : KC/2012/C0051 Date : 2012/12/12 Page : 2 of 7 Test Result(s) PART NAME NO.1 : WHITE PAPER BOARD Test Item (s): Unit Method Perfluoro
Test Report No. : KC/2012/C0051 Date : 2012/12/12 Page : 1 of 7 The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Part No. : Job No. : ID No.
More informationFORMOSA PLASTICS CORPORATION. PVC Specification
PVC Specification TYPE Grade K value Polymerization Degree Bulk Density (g/c.c) Volatile Matter (%) VAC contain % +42mesh Course particles % B-57 54.1~56.0 620±30 0.60±0.02 0.3-0.01 MASS PVC B-60 57.8~59.4
More informationNo. : KE/2009/32541 Date : 2009/03/25 Page : 2 of 13 Test Sample: PART NAME NO.1 : Description Metal Plastic / Rubber PCB / Composite Material Non-Met
No. : KE/2009/32541 Date : 2009/03/25 Page : 1 of 13 The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Style/Item No. : Color : Material Component
More informationChemical Laboratory - Kao., Test Report No. : KE/2018/12118 Date : 2018/02/01 Page : 2 of 6 Test Result(s) PART NAME NO.1 : WHITE PVC POWDER Test Item
Chemical Laboratory - Kao., Test Report No. : KE/2018/12118 Date : 2018/02/01 Page : 1 of 6 The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description
More informationTest Report Test Result(s) PART NAME NO.1 : No. : KE/2018/12644 Date : 2018/2/5 Page : 2 of 6 CLEAR POLYPROPYLENE HOMOPOLYMER Test Item (s): MBP (Mono
Test Report No. : KE/2018/12644 Date : 2018/2/5 Page : 1 of 6 The following sample(s) was/were submitted and identified by/on behalf of the client as : Sample Description : Style/Item No. : Material Component
More informationTest Report No.: CY/2012/42033 Date : 2012/05/03 Page : 1 of 5 FOLDNFOLD ENGREENEERING 4FL., NO. 3, LANE 278, KANG-TING RD., TAIPEI, TAIWAN *CY/2012/4
Test Report No. CY/2012/42033 Date 2012/05/03 Page 1 of 5 The following sample(s) was/were submitted and identified by/on behalf of the client as Product Description Style/Item No. Sample Material Manufacturer/Vendor
More informationTEST REPORT. Serie : Receiving Date: 06/07/2017 Test Start Date: 08/07/2017 Test End Date: *SUMMARY OF TEST CONCLUSIONS
Address: Attn: Tel: Client: e-mail: Code: The following sample was (were) submitted and identified by the client as: Sample description: RAW MATERIAL Batch No.: Job no Report No.: 17-010610 Reference No.:
More informationTEST REPORT. Serie : Receiving Date: 06/07/2017 Test Start Date: 08/07/2017 Test End Date: *SUMMARY OF TEST CONCLUSIONS
Address: Attn: Client: Tel:+ Fax: + e-mail: Code: The following sample was (were) submitted and identified by the client as: Sample description: RAW MATERIAL Batch No.: Job no Report No.: 17-010611 Reference
More informationPASS TEST REPORT OVERALL RESULT: At the request of the client, the following tests were conducted:
Recipient Email: roz@peerlessumbrella.com Pages: Page 1 of 6 SAMPLE INFORMATION: Description: The Winchester 48" Fashion Umbrella Assortment: - Purchase Order Number: Roz SKU/style No.: 2610SO Toy Co./Agency:
More informationAll recipients are advised to seek legal advice on their specific obligations under the described regulations and any future amendments.
The restrictions on the marketing and use of azo colourants according to the European legislation following the Directive 2002/61/EC (19 th Amendment of Council Directive 76/769/EEC) ETAD Information Notice
More informationInk mixing Instructions:
Ink mixing Instructions: Pad printing Inks are mixed by weight not volume. (A digital scale measuring in grams is recommended.) - Open the Ink Container and mix thoroughly. - Place an appropriate container
More informationSAFETY MADE EASY. The Importance of Hand Protection in the Workplace. FT Work Safety Awareness
The Importance of Hand Protection TM If a workplace hazard assessment reveals that employees face potential injury to hands and arms that cannot be eliminated through engineering and work practice controls,
More information[Date of order] [Date of delivery] [Date]
CTL GmbH ChemicalTechnological Laboratory Krackser Straße 12 33659 Germany Killer Ink Limited Mr Safar Units 24 Parliament Business Centre Commerce Way, Liverpool, L8 7BA UNITED KINGDOM Marion Heyde [fon]
More informationTÜRKAK TÜRK AKREDITASYON KURUMU TURKISH ACCREDITATION AGENCY. TÜV Rheinland. Tel: Fax: Deney Raporu Test report
TÜRKAK TÜRK AKREDITASYON KURUMU TURKISH ACCREDITATION AGENCY tarafından akredıte edilmiştır. TÜV Rheinland Uluslararası Standartlar Sertıfıkasyon ve Denetım A.Ş. Saniye Ermutlu Sokak Çolakoğlu Plaza B
More informationPhase Separation Science, Inc.
Phase Separation Science, Inc. Environmental Sampling Guide 6630 Baltimore National Pike Baltimore, Maryland 21228 PADEP # 68-03330 VELAP # 460156 www.phaseonline.com 410-747-8770 / 800-932-9047 FAX 410-788-8723
More informationSuper Cyanoacrylate Adhesive Gel 8334
Super Cyanoacrylate Adhesive Gel 8334 Super Cyanoacrylate Adhesive has been formulated to quickly bond plastics, metal, and ceramics. It offers excellent strength characteristics. Also available in display
More informationInk mixing Instructions:
Ink mixing Instructions: Pad printing Inks are mixed by weight not volume. (A digital scale measuring in grams is recommended.) - Open the Ink Container and mix thoroughly. - Place an appropriate container
More informationPVC: how innovation can ensure a bright future in cable applications
PVC: how innovation can ensure a bright future in cable applications Daniel Ortiz Martinz Technical Marketing & Development Manager INOVYN an platform CONTENT Who we are: INOVYN key dimensions To start
More informationTest Report No. BLR/R(Re)/12/ Dated
Dated 24.07.2012 Applicant : Eastman Industries Ltd., C-87, Focal Point, Phase 5, Ludhiana, (PB.) - 141010 Attention India : Mr. Arun Kumar Tested Sample : Received on 16.07.2012 Test Period : 16.07.2012
More informationAIHA Laboratory Accreditation Programs, LLC
AIHA Laboratory Accreditation Programs, LLC acknowledges that Maxxam Analytics 22345 Roethel Drive, Novi, MI 48375 Laboratory ID: 100967 along with all premises from which key activities are performed,
More informationEURAPID O3 Conventional printing inks for metal decoration
EURAPID O3 Conventional printing inks for metal decoration Characteristics EURAPID O3 inks are new high concentrated offset and dry offset printing inks designed for printing on boards and containers on
More informationActive Beauty Raw Material Information Profile
Trade name: PRIMALHYAL 1000 Commercial reference: SO_PRIM Harmonized tariff code: 3913900088 Supplier name: Soliance Country of origin: France Product category: Active cosmetic ingredient 1. Regulatory
More informationActive Beauty Raw Material Information Profile
Trade name: UNIPEARLS LBE Commercial reference: 41112 Harmonized tariff code: 3824.999390 Supplier name: INDUCHEM AG Country of origin: Switzerland Product category: Visual Carrier 1. Regulatory status
More informationCreative Colors SOLUTIONS FOR COLORING YOUR WORK ENVIRONMENT
Creative Colors SOLUTIONS FOR COLORING YOUR WORK ENVIRONMENT Creative Colors SOLUTIONS FOR COLORING YOUR WORK ENVIRONMENT Clariant is a global leader in the field of specialty chemicals. Strong business
More informationAIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION
AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION SGS Galson Laboratories, Inc. Laboratory ID: 100324 6601 Kirkville Road, East Syracuse, NY 13057 Issue Date: 12/19/2017 The laboratory
More informationSafe Durable Recyclable Sustainable. The first PVC pipes were installed over 80 years ago, most of which are still in service today.
The first PVC pipes were installed over 80 years ago, most of which are still in service today. PVC4Pipes is the ECVM s platform to communicate about the use of PVC in pipe systems in the global market.
More informationOfficial Journal of the European Union
L 36/12 EN COMMISSION REGULATION (EU) 2017/237 of 10 February 2017 amending Annex III to Regulation (EC) No 1223/2009 of the European Parliament and of the Council on cosmetic products (Text with EEA relevance)
More informationIndustrial Hygiene Laboratory Accreditation Program (IHLAP) Initial Accreditation Date: 01/01/1979
AIHA Laboratory Accreditation Programs, LLC SCOPE OF ACCREDITATION SGS Galson, a division of SGS North America, Inc. Laboratory ID: 100324 6601 Kirkville Road, East Syracuse, NY 13057 Issue Date: 03/05/2018
More informationSAKATA INX ... CONCEPT OF INK KITCHEN IN CONVERTING INDUSTRIES
CONCEPT OF INK KITCHEN IN CONVERTING INDUSTRIES Presenter: R. S. Prasad. Sakata Inx (India) Ltd Venue: PackAge Conference, Hall No.-8, Pragati Maidan, New Delhi Date /Time: 2nd December 2010 14:25 hrs
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationWorléeAqua Nail - The simple Way to create outstanding water-based Nail Polishes
- The simple Way to create outstanding water-based Nail Polishes Product Range Product INCI Characteristics 100 200 Base Coat Top Coat Natural Remover Aqua, Polyacrylate-42, Dibutyl Sebacate, PPG-2 Methyl
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationMaterial Safety Data Sheet HAYNES ANTI-SEIZE
1. Product and Company Identification Product Name: Haynes Anti-Seize Chemical Name: N/A Chemical Family: Petroleum Based Grease Formulations Manufacturer: Haynes Manufacturing Co. 24142 Detroit Road Westlake,
More informationEDELSTEIN Topaz Orange Superior Chromatic Effects
- What is it? The new is a highly chromatic effect pigment that offers new styling opportunities for exciting shades. provides exceptional optical appearance: a highly chromatic color combined with intense
More informationTest standard: European Standard on Safety of toys EN71-1 : 2014
1 Mechanical and Physical Test Test standard: European Standard on Safety of toys EN71-1 : 2014 Clause Testing items Assessment 4 General requirements 4.1 Material P 4.2 Assembly NA 4.3 Flexible plastic
More informationActive Beauty Raw Material Information Profile
Trade name: AZELIANCE Commercial reference: DI_AZLV Harmonized tariff code: 3824909299 Supplier name: Givaudan Active Beauty Country of origin: France Product category: Cosmetic Ingredient 1. Regulatory
More informationSafe Durable Recyclable Sustainable. The first PVC pipes were installed over 80 years ago, most of which are still in service today.
The first PVC pipes were installed over 80 years ago, most of which are still in service today. PVC4Pipes is the ECVM s platform to communicate about the use of PVC in pipe systems in the global market.
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Revision Date January 13, 2009 Prepared by Patti Rogers Head Office 9347-193 Street, Surrey, B.C., Canada V4N 4E7 Technical Information 1-800-201-8822 or support@mgchemicals.com
More informationMaterial Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION Product Name: for advertising Product Code: CGPSF-P & CGPSF-PG Supplier Information Company Name: CGATE GROUP CO., LTD Address: 7F B1, Junyao International Plaza,
More informationWhy is pretreatment needed
Pretreatments Why is pretreatment needed As a whole this process consist of desizing process, scouring and bleaching. Pretreatment process basically aim to removal all impurities found on fiber ( especially
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationtech 66 General Statements Regarding the Chemical Resistance of nora Floor Coverings
This document is written as a general statement to address nora s stain resistance to chemical contamination however facilities must realize that it does not address all the chemicals and chemical compounds
More informationMATERIAL SAFETY or (651) (24 hours)
MATERIAL SAFETY DATA SHEET (Experimental) 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 1999, Minnesota Mining and Manufacturing Company. All rights
More informationCOMMISSION DIRECTIVE 2009/36/EC
17.4.2009 Official Journal of the European Union L 98/31 DIRECTIVES COMMISSION DIRECTIVE 2009/36/EC of 16 April 2009 amending Council Directive 76/768/EEC, concerning cosmetic, for the purpose of adapting
More informationH&M GROUP CHEMICAL RESTRICTIONS 2019
H&M GROUP CHEMICAL RESTRICTIONS 2019 RESTRICTED SUBSTANCES LIST (RSL) Toys Global Product Compliance Department Valid for all brands in the H&M Group. Contents General... 3 Commitment... 3 Examples...
More informationApplicant: NEAT-OH! INTERNATIONAL, LLC Date: Dec 20, FRONTAGE ROAD SUITE 303 NORTHFIELD IL USA Attn: ELAN FELDMAN
Applicant: NEAT-OH! INTERNATIONAL, LLC Date: Dec 20, 2013 790 FRONTAGE ROAD SUITE 303 NORTHFIELD IL 60093 USA Attn: ELAN FELDMAN Sample Description: Five (5) sets of submitted sample said to be : Item
More informationBaseline document for Suspension PVC powder manufacturing. Quality Engineering
Baseline document for Suspension PVC powder manufacturing Summary: Quality Engineering This proposal documents the baseline of a PVC 1 powders manufacturing process and its recommendations on how to improve
More informationChemical products 2006
The Swedish Society for Nature Conservation Application licence Bra Miljöval Chemical products 2006 NOTE: This document is a translation. The original Swedish version always prevails. A INFORMATION ON
More informationProcedure: Hazardous Substances and Dangerous Goods Storage and Safe Use
Procedure: Hazardous Substances and Dangerous Goods Storage and Safe Use Date Description of Original Document/Amendments Prepared/Edited By 09/04/14 Initial Draft Jasmina Lozanovska 30/04/14 Released
More informationMATERIAL SAFETY DATA SHEET SECTION 1 - PRODUCT INFORMATION SUPERPLASTICIZER SECTION 2 - HAZARD IDENTIFICATION
MATERIAL SAFETY DATA SHEET SUPERPLASTICIZER SECTION 1 - PRODUCT INFORMATION PRODUCT NAME: SUPERPLASTICIZER CHEMICAL NAME: Sodium salt Naphthalene sulfonate formaldehyde condensate CAS NUMBER: 9084-06-4
More informationAvery Dennison SW 900 Supreme Wrapping Film
Uses: Avery Dennison SW 900 Easy Apply Cast Vinyl Film is a premium quality cast film designed for use in vehicle and graphics markets where high quality film finish and cost effective full color wrapping
More information... Issuing Laboratory:
The submitted sample was tested under the following requirements requested by the applicant, subject to the information stated in the remark and attached page(s) for details : Requirement (1) U.S. ASTM
More information!!! CCS LAVENDER SPIKE OIL ESSENCE!!!!!! ! SAFETY DATA SHEET (SDS)! Page 1 of 5. MSDS for # CLSCL STDIO OILS MED
Page 1 of 5 SAFETY DATA SHEET (SDS) CCS LAVENDER SPIKE OIL ESSENCE Identification Name: CCS LAVENDER SPIKE OIL ESSENCE Relevant identified uses of the substance Use of the substance/mixture: For oil painting
More informationH&M GROUP CHEMICAL RESTRICTIONS 2018
H&M GROUP CHEMICAL RESTRICTIONS 2018 RESTRICTED SUBSTANCES LIST (RSL) Toys Global Product Compliance Department Valid for all brands in the H&M Group. Table of Contents General... 3 Commitment... 3 Examples...
More informationWater Based & UV Flexo Range. Flexo Inks, Coatings, Adhesives & Chemistry
Water Based & UV Flexo Range Flexo Inks, Coatings, Adhesives & Chemistry Flexo Inks, Coatings and Washes Ultrachem is one of the UK s largest independent manufacturers and suppliers of inks, coatings and
More informationDMPA Dimethylolpropionic Acid in Air Dry Water Soluble Alkyd Resins
DMPA Dimethylolpropionic Acid in Air Dry Water Soluble Alkyd Resins DMPA Dimethylolpropionic Acid TECHNICAL BULLETIN #1 North America 300 Brookside Avenue Building #23, Suite 100 Ambler, PA 19002 USA DMPA
More information*HJ * Test Report H (HKGH ) Number:
Applicant: HASBRO S.A. / HASBRO INTERNATIONAL Date: May 17, 2016 TRADING B.V. RM 1308 WORLD COMMERCE CTR HARBOUR CITY 11 CANTON RD TSIM SHA TSUI KLN HK Attn: ROBIN ZHU Submitted samples said to be : Item
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationACGIH TLV mg/m3. OSHA PEL mg/m3
Material Safety Data Sheet Product No. 19223 Vinylec E (Formvar ) Resin Issue Date (06-01-03) Review Date (06-01-12) Section 1: Product and Company Identification Product Name: Vinylec E (Formvar ) Resin
More informationGLOVES. International Quality System Certificate Awarded
GLOVES International Quality System Certificate Awarded Glove VINYL GLOVE... 3 LATEX GLOVE... 4 CAST POLYETHYLENE (CPE) GLOVE... 6 THERMOPLASTIC ELASTOMER (TPE) GLOVE... 8 NITRILE GLOVE... 9 NITRILE SURGICAL
More informationPetroleum Jelly / Vaseline General information and synonyms
Petroleum Jelly / Vaseline General information and synonyms COLOUR: Colour ranges from White to Yellow COMMON NAMES: Petrolatum, Petroleum Jelly, Vaseline, Soft Paraffin, Paraffin Jelly, Petroleum Vaseline
More informationEvoMEDICO INTERIOR MATT
TDS0049 Established: 20 Mar 2013 Updated: 04 Jul 2017 TECHNICAL DATA SHEET FOR EvoMEDICO INTERIOR MATT DESCRIPTION An environmentally friendly, anti-bacteria coating for interior use which is washable,
More informationSAFETY DATA SHEET. SECTION 1: Product Name: SNIPER PRODUCT AND COMPANY INFORMATION SECTION 2 - HAZARD(S) IDENTIFICATION. SNiPER Hospital Disinfectant
SAFETY DATA SHEET IDENTIFICATION SNiPER Hospital Disinfectant June 2018 SECTION 1: Product Name: SNIPER MANUFACTURER / DISTRIBUTOR: PRODUCT AND COMPANY INFORMATION GLOBAL ENVIRONMENTAL RESTORATION, INC
More information2016 RAPEX TOTAL RECALLS AND FOCUS ON CPCH* PRODUCTS
2016 RAPEX TOTAL RECALLS AND FOCUS ON CPCH* PRODUCTS *Cosmetics, Personal Care and Household I TOTAL RECALLS 2016 RAPEX 2016 - TOTAL RECALLS BY PRODUCT CATEGORY 500 450 400 350 300 250 200 150 100 50 0
More informationWhy Memjet for food labeling?
Why Memjet for food labeling? Safe. Fast. Effective. GOOD CHEMISTRY: Memjet s solutions use water-based inks which are 100% free of reactive chemistries making them safer to use and better for the environment.
More information3M Adhesive Remover 6040, 6.25 fl oz, 6 per case, Restricted
Products & Services Brands Technologies Our Company Partners & Suppliers Product Catalog for OH&ES > Cleaning Products and Lubricants > 3M Chemical Cleaners, Disinfectants and Deodorizers > Industrial
More information3D-Beauty International Red Hill Avenue, Suite F Tustin, CA USA Tel: ** MATERIAL SAFETY DATA SHEET Finished Product**
Express Cleanser SECTION 1 SUBSTANCE & PRODUCT IDENTIFICATION TRADE NAME: Express Cleanser CODE: Cleanser; Liquid Makeup Remover FINISHED PRODUCT NAME: Express Cleanser EFFECTIVE DATE: May-2012 DESCRIPTION
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product identifier: AlbaChem Dri-Web Foam Adhesive Spray Product Number: 1075 Date Prepared: April 9, 2009 Revision Date:
More informationBaltic info campaign on hazardous substances (BaltInfoHaz) - the first international LIFE+ Information and Campaign project in the Baltic States
THINK BEFORE YOU BUY WWW.THINKBEFORE.EU Baltic info campaign on hazardous substances (BaltInfoHaz) - the first international LIFE+ Information and Campaign project in the Baltic States Think before you
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationSilicone Ingredients for Personal Care
Silicone Ingredients for Personal Care SF-600 SF-600B SF-600D SF-602A SF-607 SF-609 SF-6212 SF-6212N SF-606 Powder SF-6061 Powder SF-6081 Suspension SF-6082 Silicone Resin Elastomer Suspension (and) /Vinyldimethicone
More informationCOMMISSION REGULATION (EU)
EN L 315/34 Official Journal of the European Union 26.11.2013 COMMISSION REGULATION (EU) No 1197/2013 of 25 November 2013 amending Annex III to Regulation (EC) No 1223/2009 of the European Parliament and
More informationChevron Material Safety Data Sheet
Chevron Material Safety Data Sheet DISCONTINUED - See Section 16. CHEVRON NL Gear Compound 150 CPS255053 Page 1 of 6 This Material Safety Data Sheet contains environmental, health and toxicology information
More informationLEXCOR MATERIAL SAFETY DATA SHEET
LEXCOR MATERIAL SAFETY DATA SHEET DATE PREPARED: 08/03/2012 SECTION 1 CHEMICAL PRODUCT & COMPANY IDENTIFICATION PRODUCT NAME LEXBOARD SUPPLIER NAME AND ADDRESS Lexsuco 2010 Corporation 3275 Orlando Dr.
More informationCHEMICALS IN PRODUCTS ECOLOGY S DATA AND POLICY EFFORTS
Joshua Grice Research Analyst Reducing Toxic Threats Washington State Department of Ecology (360) 407-6786 joshua.grice@ecy.wa.gov CHEMICALS IN PRODUCTS ECOLOGY S DATA AND POLICY EFFORTS January 2014 Prevention
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationMATERIAL SAFETY DATA SHEET
MSDS : 1399-2 NAME OF PRODUCT : Acetic acid glacial PRODUCT IDENTIFICATION AND USE USE OF PRODUCT : Acetates manufacture TRANSPORTATION OF DANGEROUS GOODS SHIPPING NAME : Acetic acid glacial WHMIS: B3,
More informationThe text for GHS Hazard Statements shown above (if any) is given in the "Other information" Section.
P305+P351+P338 P308+P313 P312 P332+P313 P337+P313 P362+P364 P403+P233 P405 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
More informationMATERIAL SAFETY DATA SHEET Revision Date: 16 MAR 2015
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product Name: Synonyms: Manufacturer: Address: WizKid Antimicrobial Mat Urinal Mat SANASTAR, INC 5079 NORTH DIXIE HIGHWAY #303 OAKLAND PARK, FL 33334 Emergency
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product Name: Product Number: 91298, 91328, 91331, 93069 Date Prepared: 3/7/2002 Manufacturer: Telephone: MEDICAL EMERGENCY TRANSPORTATION
More informationColour Toner - Conventional or Chemical
Colour Toner - Conventional or Chemical The Practical Issues Topics Conventional Toner Spheridising Chemical Toner Manufacture Alternative Processes Performance Comparisons Image Quality Cost Reliability
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 1999, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationChapters 18, 22 & 30 Viscosity-inducing Agents, Ointment Bases and Ointments, Creams, Gels, and Pastes
Chapters 18, 22 & 30 Viscosity-inducing Agents, Ointment Bases and Ointments, Creams, Gels, and Pastes Chapter 18 (Viscosity-inducing Agents) 1. What is Carbomer NF? 2. Carbomer is commonly referred to
More informationMIGLYOL 840. Excellent light emollient. Alternative to IPM. INCI: Propylene Glycol Dicaprylate/Dicaprate. Excellent light and dry emollient
Excellent light emollient Excellent light and dry emollient Alternative to IPM 1. Description: MIGLYOL 840 is a propylene glycol diester of saturated plant fatty acids with chain lengths of C 8 and C 10.
More informationTender Notice No. DGVCL/SP/10048/Ind. Safety Shoes, PVC Boot & Rain Coat. Item No. 1 : Specifications of Industrial Safety Shoes
Sr. Item 1 : s of Industrial Safety Shoes Certification IS 15298 PART ( II ) 1 Upper leather Full Grain Barton Non Din leather. 2 Upper leather thickness 1.8 mm- 2.20 mm +/- 0.2 mm 3 Toe Composite toe
More informationElastomeric Fibers. Most elastomeric fibers stretch over 400% and return back to their original size. Rubber o Natural rubber o Synthetic rubber
Elastomeric Fibers Most elastomeric fibers stretch over 400% and return back to their original size Rubber o Natural rubber o Synthetic rubber Spandex o Most commonly used elastomer o Elastane - ISO equivalent
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product Name: Product Number: 91298, 93069 Date Prepared: 10/4/2013 Manufacturer: Telephone: MEDICAL EMERGENCY TRANSPORTATION
More informationMATERIAL SAFETY. St. Paul, Minnesota or (651) (24 hours)
MATERIAL SAFETY DATA SHEET 3M 3M Center St. Paul, Minnesota 55144-1000 1-800-364-3577 or (651) 737-6501 (24 hours) Copyright, 2001, Minnesota Mining and Manufacturing Company. All rights reserved. Copying
More informationPREPARE DATE : 09/24/2001 GENERAL INFORMATION: REVISION NO. : 0 DAP INC. : DAP-TIPS ( ) REVISION DATE: 09/24/2001
------------------------------------------------------- M A T E R I A L S A F E T Y D A T A S H E E T ------------------------------------------------------- SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
More informationType Capacity Litres Litres Litres Litres Litres Litres ASPIRATOR, P. P. (EC )
Beakers & Bottles ASPIRATOR, POLYTHENE (EC.102.03) Rigid polyethene, Heavy duty, with plastic screw cap, stopcock, jerry can type..01 2.5 Litres..02 5 Litres.03 10 Litres.04 20 Litres..05 35 Litres.06
More informationTailored solutions for all textiles, apparel and garments. Weaving quality into your clothing, textiles and footwear
Tailored solutions for all textiles, apparel and garments Weaving quality into your clothing, textiles and footwear Why do your textile and apparel products need testing? Compliance Requirements In every
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 5 E - Epoxyacrylat sds no. : 226839 Revision: 25.05.2010 printing date: 04.08.2010 1. Identification of the substance/preparation
More informationDoNuts Collection - Content
DoNuts Collection DoNuts Collection - Content General specifications page 3-4 DoNuts Original - tube cover specifications page 5-6 DoNuts Solids - tube cover specifications page 7-10 DoNuts Leather-Look
More informationMake the Switch! Your guide to product replacement: Choosing greener, healthier, and safer products
Make the Switch! Your guide to product replacement: Choosing greener, healthier, and safer products Green & Clean Program Boston Public Health Commission Why Should You Choose Green Products? 1. Protect
More informationSafety Data Sheet according to (EC) No 1907/ ISO
Safety Data Sheet according to (EC) No 1907/2006 - ISO 11014-1 Page 1 of 1 LOCTITE 415 20g GB sds no. : 153533 Revision: 17.05.2010 printing date: 27.01.2011 1. Identification of the substance/preparation
More informationSona Plastic Industries
+91-8048079200 Sona Plastic Industries https://www.sonaplastic.com/ An ISO 9001:2008 Certified Company, Engaged In Manufacturing And Exports Of Prime Quality Plastic Tubing, Sleeves, Hoses and Profiles.
More informationBIODEGRADABLE SCREEN PREPARATION CHEMICALS
BIODEGRADABLE SCREEN PREPARATION CHEMICALS 160 Fenmar Drive, Weston, Ontario, Canada, M9L 1M6, Tel: 877-465-6362, Fax: 416-743-1511 12180 Boul.Industriel, Montreal, Quebec, H1B 5R7, Tel: 514-644-4404,
More informationSAFETY DATA SHEET. Date Issued: 2/23/15 Page 1 of 5
Date Issued: 2/23/15 Page 1 of 5 SECTION 1 COMPANY and PRODUCT IDENTIFICATION MANUFACTURER GARDNER-GIBSON CORPORATION 4161 East 7 th Avenue Tampa, FL 33605 EMERGENCY TELEPHONE NUMBER 1-800-424-9300 CHEMTREC
More information