TABLE OF CONTENTS 1. PRODUCT OVERVIEW 3 2. MANUFACTURING PROCESS 3 3. STABILITY AND FORMULATION PROPERTIES 3 4. PRODUCT RANGE 4 5. INCI NOMENCLATURE 4

Transcription

1

2 TABLE OF CONTENTS PAGE 1. PRODUCT OVERVIEW 3 2. MANUFACTURING PROCESS 3 3. STABILITY AND FORMULATION PROPERTIES 3 4. PRODUCT RANGE 4 5. INCI NOMENCLATURE 4 6. GUIDELINE FORMULATIONS Body and Foot Exfoliating Cream 5 Exfoliating Cream Wash 6 Exfoliating Body Wash CIREBELLE Blue 7 Exfoliating Body Wash Fruit Punch 8

3 1. PRODUCT OVERVIEW CIREBELLE Beads are effective mechanical exfoliators. The smooth, spherical beads ensure gentle exfoliation and can be used daily. Exfoliation helps the skin look smooth, even and radiant, whilst imparting a softer and supple feel. These benefits are achieved, since exfoliation removes the outer layers of dull, dead cells with a resultant increase in the desquamation (cell rejuvenation) rate. CIREBELLE Beads have the added benefit that they enhance the visual attractiveness of your product. Selecting the ideal colour(s) and size allows the opportunity to match one s formulation to a specific brand or theme. 2. MANUFACTURING PROCESS CIREBELLE Beads are manufactured with extreme care to ensure consistent quality and purity. In order to maintain the high quality standard, CIREBELLE Beads are subjected to 5 production steps before finally being packed: 2.1 Blending and Dispersion The applicable ingredients are blended together and the pigments dispersed carefully in a temperature controlled vessel. Care is excercised not to expose sensitive ingredients to conditions that could affect their stability or potency. 2.5 Sorting Each kilogram of product is hand sorted as a final check and approval step. Colour, uniformity and overall resemblance are compared to a standard. Based on the extent of deviation, products are either rejected or rerouted to one of the previous steps. 3. STABILITY AND FORMULATION PROPERTIES CIREBELLE Beads are chemically stable and are compatible with all common cosmetic raw materials and are not affected by ph extremes normally found in cosmetic formulations. Testing for robustness in various formulations has shown complete stability with regard to colourfastness and bleeding of colour. CIREBELLE Beads can be incorporated into emulsions, gels or surfactant / gel bases, provided that a rheology modifier is used to keep the particles suspended. Examples of rheology modifiers include Veegum, Bentone, Carbopol and Xanthan gum. The high melting point (100 ºC) of the beads allow for their incorporation soon after production of the emulsions. 2.2 Micronisation A technologically advanced process is used to form the spherical particles in the required particle size. 2.3 Classification This is a quality assurance step and ensures uniformity of the particles. 2.4 Air Aspiration This process was developed to remove from the bulk any particles differing in either form or density.

4 4. PRODUCT RANGE TRADE NAME PARTICLE SIZE PRODUCT CATEGORY FUNCTION % USED WHITE BEADS (CB102) CIREBELLE 102UF CIREBELLE 102F Skincare Exfoliating CIREBELLE Body & Foot care and / or 2-6 CIREBELLE 102C Toiletries Polishing CIREBELLE 102UC STANDARD COLOURED BEADS (CB104) CIREBELLE 104 White CIREBELLE 104 Black CIREBELLE 104 Brown CIREBELLE 104 Blue CIREBELLE 104 Green CIREBELLE 104 Red CIREBELLE 104 Pink CIREBELLE 104 Violet Skincare Exfoliating CIREBELLE 104 Gold CIREBELLE 104HM Summer Orange CIREBELLE 104 Saffron Sun & Body & Foot care Toiletries Polishing Striking visual effects 1-3 CIREBELLE 104 Crimson Spice CIREBELLE 104 Emerald Mint CIREBELLE 104 Grape CIREBELLE 104 Hot Chocolate CIREBELLE 104 Monarch Blue CIREBELLE 104HD Cornflower Blue

5 5. INCI NOMENCLATURE CIREBELLE 102 (all cutsizes) Synthetic Wax CIREBELLE 104 White Synthetic Wax (and) CI (Titanium Dioxide) CIREBELLE 104 Black Synthetic Wax (and) CI (Iron Oxide Black) CIREBELLE 104 Brown Synthetic Wax (and) CI (Iron Oxide Red) (and) CI (Iron Hydroxide Oxide Yellow) (and) CI (Iron Oxide Black) CIREBELLE 104 Blue Synthetic Wax (and) CI (Ultramarines) CIREBELLE 104 Green Synthetic Wax (and) CI (Chromium Oxide Greens) CIREBELLE 104 Red Synthetic Wax (and) Talc (and) CI (D&C Red No. 30) CIREBELLE 104 Pink Synthetic Wax (and) CI (Titanium Dioxide) (and) Talc (and) CI (D&C Red No. 30) CIREBELLE 104 Violet Synthetic Wax (and) CI (Ultramarines) (and) Talc (and) CI (D&C Red No. 30) CIREBELLE 104 Gold Synthetic Wax (and) CI (Mica) (and) CI (Titanium Dioxide) (and) CI (Iron Oxide Red) CIREBELLE 104HM Summer Orange Synthetic Wax (and) CI 47005:1 (Acid Yellow 3 Al Lake) (and) Talc (and) CI (D&C Red No. 30) CIREBELLE 104 Saffron Sun (and) CI 19140:1 (Acid Yellow 23 Aluminum Lake) CIREBELLE 104 Crimson Spice (and) CI 16255:1 (Acid Red 18 Aluminum Lake) CIREBELLE 104 Emerald Mint (and) CI 19140:1 (Acid Yellow 23 Aluminum Lake) (and) CI 42090:2 (Acid Blue 9 Aluminum Lake) CIREBELLE 104 Grape (and) CI 14720:1 (Acid Red 14 Aluminum Lake) (and) CI 42090:2 (Acid Blue 9 Aluminum Lake) CIREBELLE 104 Hot Chocolate (and) CI 15985:1 (Sunset Yellow Aluminum Lake) (and) CI 19140:1 (Acid Yellow 23 Aluminum Lake) (and) CI 14720:1 (Acid Red 14 Aluminum Lake) (and) CI 42090:1 (Acid Blue 9 Barium Lake) CIREBELLE 104 Monarch Blue (and) CI 42090:2 (Acid Blue 9 Aluminum Lake) CIREBELLE 104HD Cornflower Blue Synthetic Wax (and) CI (Mica) (and) CI (Titanium Dioxide) (and) CI (Ferric Ferrocyanide)

6 6. GUIDELINE FORMULATIONS BODY & FOOT EXFOLIATING CREAM FORM. REF. NO.: BE TRADE NAME INCI NAME % A Water (Purified) Water Veegum HV Magnesium Aluminum Silicate 0.50 B Methyl Paraben Methylparaben 0.20 Sequestrene Na 2 Disodium EDTA 0.10 Triethanolamine 99% Triethanolamine 0.70 Propylene Glycol Propylene Glycol 5.00 C Glyceryl Monostearate S/E Glyceryl Stearate 3.00 Propyl Paraben Propylparaben 0.20 CIREBELLE 303 Synthetic Wax 5.00 Petroleum Jelly Petrolatum 3.00 Stearic Acid Triple Pressed Stearic Acid 2.00 Mineral Oil Mineral Oil 4.00 D Sepigel 305 Polyacrylamide (and) C13-14 Isoparaffin & Laureth E CIREBELLE 102F Synthetic Wax 4.00 CIREBELLE 102C Synthetic Wax 3.00 F Water (Purified) Water 1.00 Germall 115 Imidazolidinyl Urea MANUFACTURING METHOD A B C D E F Heat water up to 80ºC and disperse Veegum HV using a high shear mixer. Add all ingredients and mix well. Charge all ingredients into another pot and heat up to 80ºC. Mix until all solids are melted. Add oil phase (C) at 80ºC to water phase at 80ºC (A+B). Mix with high speed for minutes. Add Sepigel 305 and Silverson for another 5 minutes. Replace high shear mixer with counter rotating mixer and cool the bulk to 35-40ºC. Add beads mixing slowly but well. Pre-dissolve Germall 115 in water (clear solution) and add to the bulk. Mix well.

7 EXFOLIATING CREAM WASH FORM. REF. NO.: BC TRADE NAME INCI NAME % A Water Purified Water Carbopol ETD 2020 polymer Acrylates/C10-30 Alkyl Acrylate Crosspolymer 0.50 B Glucam E-20 Methyl Gluceth Arlatone DUO Disodium Lauryl Sulfosuccinate (and) Sodium Cocoyl 6.00 Isethionate (and) Zea Mays (and) Cetearyl Alcohol (and) Aqua (and) Hydrogenated Castor Oil (and) Glycerine (and) Titanium Dioxide Empicol 0405 Sodium Laureth Sulfate Empigen BS-FA/AF Cocamidopropyl Betaine 5.00 C Wheat Germ Oil Triticum Vulgare (Wheat) Germ Oil 2.00 Sweet Almond Oil Prunus Amygdalus Dulcis (Sweet Almond) Oil 2.00 BHT BHT 0.10 CIREBELLE 505 Synthetic Wax 4.00 D Germaben II Propylene Glycol (and) Diazolidinyl Urea (and) 1.00 Methylparaben (and) Propylparaben CIREBELLE 102F ( ) Synthetic Wax 3.00 CIREBELLE 104 Blue ( ) Synthetic Wax (and) CI (Ultramarines) 0.40 E Triethanolamine 99% Triethanolamine A B C D E MANUFACTURING METHOD Heat the water up to 50-55ºC. Insert the Silverson and disperse Carbopol ETD 2020 polymer. Add all ingredients. Heat up to 70-75ºC and Silverson until solids have melted. In another pot add all ingredients from part C. Heat up to 70-75ºC and mix slowly until all solids have melted. Add oil phase (C) at C to water phase (A+B) at C while mixing with Silverson. Mix for 10-15min. Replace the Silverson with counter rotating mixer. Cool the batch to C. Add ingredients from part D slowly. Add TEA concentrate and mix very slowly.

8 EXFOLIATING BODY WASH - CIREBELLE BLUE FORM. REF.: BE A TRADE NAME INCI NAME % A De-ionised Water Water Carbopol ETD 2020 polymer Acrylates/C10-30 Alkyl Acrylate Crosspolymer 1.00 B Propylene Glycol Propylene Glycol 3.00 Sequestrene Na 2 Disodium EDTA 0.10 Germaben II Propylene Glycol (and) Diazolidinyl Urea (and) 0.80 Methylparaben (and) Propylparaben C Alcohol Absolute Denatured Alcohol Denat 5.00 Empicol 0405 Sodium Laureth Sulfate Lonzaine C Cocamidopropyl Betaine PEG-40 Hydrogenated Castor Oil (and) Trideceth-9 (and) D Solubiliser 2/ Propylene Glycol (and) water 1.50 Cool Rain Fragrance 0.30 E Triethanolamine 99% Triethanolamine 0.20 F CIREBELLE 104 Blue ( ) Synthetic Wax (and) CI (Ultramarines) 0.50 Triethanolamine 99% Triethanolamine MANUFACTURING METHOD A B C D E F Heat water up to 50ºC and disperse Carbopol ETD 2020 polymer using a high shear mixer. Add ingredients one by one while mixing. Cool to room temperature. Replace high shear mixer with counter rotating mixer. Add ingredients one by one while mixing well. Pre-mix ingredients from phase C and add it to the bulk. Mix well. Add TEA and mix slowly. While adding the beads, mix well but slowly. Add second part of TEA and mix very slowly.

9 EXFOLIATING BODY WASH FRUIT PUNCH FORM. REF.: CIR A 1 TRADE NAME INCI NAME % A De-ionised Water Water Carbopol ETD 2020 polymer Acrylates/C10-30 Alkyl Acrylate Crosspolymer 0.80 B Propylene Glycol Propylene Glycol 2.00 Sequestrene Na 2 Disodium EDTA 0.10 Propylene Glycol (and) Diazolidinyl Urea (and) Germaben II Methylparaben (and) Propylparaben 1.00 C Empicol 0405 Sodium Laureth Sulfate PEG-40 Hydrogenated Castor Oil (and) Trideceth-9 (and) D Solubiliser 2/ Propylene Glycol (and) Water 2.50 Perfume Fresh Burst Fragrance 0.50 E Lonzaine C Cocamidopropyl Betaine 8.00 F CIREBELLE 104 Red ( ) Synthetic Wax (and) Talc (and) CI (D&C Red No. 30) 0.30 CIREBELLE 104HM Summer Orange ( ) Synthetic Wax (and) CI 47005:1 (Acid Yellow 3 Al Lake) (and) Talc (and) CI (D&C Red No. 30) 4.00 CIREBELLE 104 Black ( ) Synthetic Wax (and) CI (Iron Oxide Black) 0.10 G Triethanolamine 99% Triethanolamine MANUFACTURING METHOD A B C D E F G Heat water up to 50ºC and disperse Carbopol ETD 2020 polymer using a high shear mixer. Add ingredients one by one while mixing. Cool to room temperature. Replace high shear mixer with counter rotating mixer. Add Empicol 0405/AF and mix slowly. Pre-mix ingredients and add it to the bulk. Mix well. Add Lonzaine C and mix well. Add beads and mix well but slowly. Add TEA concentrate and mix very slowly.

10 Technical Bulletin BEA 2005/001 - Rev 3 Copyright August 2011 Although this information is presented in good faith and is believed to be, to the best of our knowledge, true and accurate, it has been compiled for information purposes only and without any warranty whatsoever. Due to the special nature of the products and their applications, we do not accept any responsibility or liability whatsoever that may result from the use of this information. If in doubt, please contact your local Cirebelle distributor. The information contained herein is not to be construed as a license to operate under, or a recommendation to infringe upon, existing patents, nor should it be confused with any Governmental or insurance requirements or with any national or international safety codes.