DuPont Personal Protection 2016 Product Catalog

Transcription

1 DuPont Personal Protection 2016 Product Catalog

2 DUPONT GARMENTS: LEVELS O PROTECTION TO MEET YOUR NEEDS Reflector Dual Non-hazardous particles and aerosols lame resistance Non-hazardous particles Non-hazardous particles, liquids and aerosols Light Non-hazardous particles Hazardous particles Non-hazardous light liquid splash and aerosols Chemical exposure Heavy Different jobs require different levels of protective clothing. DuPont Personal Protection offers a wide range of protective clothing to address those varying needs. Visit SafeSPEC.DuPont.com to search by industry or hazard to help you select a garment. 2 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

3 CONTENTS 4 CHOOSING A GARMENT 6 PRODUCT PART NUMBERS 8 PERMEATION DATA 10 PRODUCT LINE BY HAZARD GARMENTS ProShield ProShield 3 ProShield NexGen Tyvek Dual Tyvek Tyvek boot and shoe covers Tyvek / Tyvek Tyvek J Tychem Tychem Tychem Tychem Tychem Tychem Tychem Tychem Tychem Reflector / Tychem ensembles Accessories for Tychem garments 39 SIZING 40 DUPONT CONTROLLED ENVIRONMENTS 3 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

4 CHOOSING A GARMENT Before searching for an appropriate chemical protective garment, a detailed assessment of the nature of the hazard and the working environment is needed. There are different factors like concentration, temperature, pressure and the work environment that should be matched to the garment s fabric, design and seam construction. AIC No matter what the brand or trade name, almost all limited use protective apparel products can be classified into one of a few general fabric technologies. It is important to understand the performance attributes of the fabric being used for a given application. Why? Not all fabrics used in chemical protective garments are the same. rom exclusive DuPont technologies, such as DuPont Tychem and DuPont Tyvek to SMS and microporous film fabrics, DuPont offers a variety of fabrics with different levels of comfort, durability, breathability and protection to meet your specific needs. In order to select the appropriate protective garment, it is crucial to know how well the fabric used in the garment provides a barrier to specific hazardous materials. Testing for chemical protective fabrics can be divided into two primary categories: 1) penetration testing appropriate for particle hazards and 2) permeation testing appropriate for liquid and gaseous hazards. Penetration occurs when there is bulk movement of a material through a pore, hole, gap or defect in the fabric and is the proper method to evaluate particle barrier. Permeation, on the other hand, occurs when there is movement of the material through the barrier fabric on a molecular level. It is possible for a liquid or vapor to permeate through a fabric even when there is no observed opening in the fabric. Permeation testing is a more sensitive and representative way of characterizing the interaction of liquids and gases with the barrier fabric. Permeation testing is critical for fabrics that are exposed to hazardous liquids, vapors or gases. AIC TECHNOLOGIES TYPICALLY USED IN PROTECTIVE GARMENTS All images are magnified Increased abric Performance DuPont Tychem Chemical barrier fabrics specifically engineered for protection over a range of hazards. DuPont Tyvek Made only by DuPont, it offers superior protection and durability. Tyvek is 100% high-density polyethylene fibers entangled into a protective material with no fillers or thin films to wear away. Microporous ilms (S or M) Bi-laminate with a thin microporous film layer on a spunbonded polypropylene nonwoven, these fabrics offer limited durability barrier protection is lost when the film layer is abraded. EXCLUSIVE DUPONT TECHNOLOGIES Spunbond-Meltblown-Spunbond (SMS) SMS fabrics rely on the meltblown polypropylene layer in the middle of the open tri-laminate polypropylene structure to act as the main filter for particles limited durability and barrier performance, especially liquids. Spunbonded Polypropylene (SBPP) With their highly open structure, SBPP fabrics offer negligible barrier protection. 4 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

5 CHOOSING A GARMENT SEAM CONSTRUCTION Seams are a critical component of the overall barrier protection provided by a chemical protective garment. It is vital to select the appropriate seam configuration for your application needs and to know that the garment will be constructed with strong, tight seams. One loose thread or gap and the barrier between you and your environment unravels leaving you vulnerable. Serged or Sewn* A seam produced when multiple threads are interlocked around the raw edges of two pieces of material for a strong, stress-resistant seam. S B T T Bound* Tightly sewn with a reinforced outer binding to increase seam strength and barrier. or potential misting exposure of non-hazardous liquids or particle penetration through the seam. Taped Both sewn and taped to provide strong chemical resistance against heavy liquid splashes and tough seam stress. A sewn seam is covered with a strip of compatible material by heat-sealing. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Double Taped Sewn, then taped on the inside and the outside of the seam for a very strong chemical- and stressresistant seam. GARMENT STYLE DuPont offers a wide variety of garment styles from hoods and shoe covers to aprons, coveralls and fully encapsulated suits. ully encapsulated suits are available with front or rear entry, with a flat back for airline accommodation or an expanded back for SCBA accommodation. aceshields In addition to the standard faceshield, DuPont has several garment styles that offer a greater field of vision, enabling the wearer to see more of what they are dealing with, reducing missteps and allowing more natural movement and better eye contact. Standard Hoods In addition to our standard hood design, many of our garments offer a respirator fit hood. These hoods are designed with a longer zipper for complete coverage of the neck area. Standard Respirator fit The EX (extra-wide) faceshield options on Tychem and Tychem Level A garments feature a wrap-around design that provides ample room for a mask-mounted regulator. This faceshield is wider and longer, providing expanded peripheral and vertical viewing. EX (extra-wide) GARMENT COLOR High visibility can be either a help or a hindrance for emergency responders. or example, in hazardous situations, it is critical that emergency responders can be easily seen. In addition, hazardous material emergencies often do not occur in well-lighted environments thus the need for high visibility is obviously an important feature. The high-visibility colors chosen for DuPont Tychem fabrics were based on extensive visibility research. or example, the human eye is more sensitive to the lime yellow of Tychem and the safety yellow colors of Tychem and Tychem fabrics. On the other hand, there are instances when being visible is as dangerous as the chemical or biological agent that will be encountered. When discretion is preferred or required special low-visibility fabrics, such as Tychem, are less easy to see and blend into a variety of environments. 5 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

6 PRODUCT PART NUMBERS PRODUCT PART NUMBER ABEVIATIONS To simplify ordering and inventory management at your facility, we developed a simple, logical and intuitive product part numbering system. Using only 16 characters, each part number is comprised of abbreviations that provide all the information you need. or your convenience, here is a guide to these abbreviations. PART NUMBER GUIDE TY 120 S WH LG abric Style Seam Color Size Case count Options The first two characters are the fabric description. Abbreviations DuPont Tychem Tychem Tychem T Tychem TP Tychem C3 Tychem Tychem RC Tychem Tychem R Tychem Reflector 99 Accessories DuPont Tyvek TD Tyvek Dual TY Tyvek TJ Tyvek J C Tyvek C Seam construction Abbreviations S Serged or sewn B Bound T Taped or double taped See page 5 for details. Many DuPont garments are available in a range of sizes; refer to catalog descriptions for details. Abbreviations* SM Small MD Medium LG Large XL Extra large 2X 2 Extra large 3X 3 Extra large 4X 4 Extra large 5X 5 Extra large 6X 6 Extra large 7X 7 Extra large 00 Universal See page 39 for sizing charts. or example, TV designates Trade Agreement Act compliant. VP designates vend packed. Not all option codes are available for all products; refer to catalog descriptions for details. See page 7 for abbreviations. DuPont ProShield PB ProShield NG ProShield NexGen P3 ProShield 3 Other TM DuPont offers a wide array of garment styles from hoods to aprons and coveralls to fully encapsulated suits. Each garment style has a unique three-digit code. Several DuPont fabrics are available in color options. Abbreviations BU Blue GY Gray LY OR Orange SV Silver TN Tan Lime yellow WH White YL Yellow Provides the number of garments per case. *Not all sizes available in all styles. Stock Items versus Make to Order or the General Protection line of garments (Tyvek, ProShield, ProShield 3, ProShield NexGen and ), sizes Medium to 4X are identified as stock items. Sizes Small and 5X and above are identified as Make to Order. Certain accessory items are also identified as Make to Order. Most garments in the Chemical/HazMat line (Tychem, Tychem, Tychem, Tychem, Tychem and Tychem ) are identified as Make to Order. A small grouping is identified as stock items, following the same size guidelines as indicated above. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 6 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

7 PRODUCT PART NUMBERS OPTION CODE ABEVIATIONS 00 Standard offering 0B Bulk pack 2K Double storm flap w/zipper & hook-and-loop closure 5C Showa Best 892 outer glove 5V Showa Best 890 7C MSA connector pass-thru CAMDS (#491335) right side 7M MSA dual purpose w/oster fitting N MSA quick fill w/schrader fitting R MSA dual purpose # Hansen fitting (left front waist) 7S Scott pass-thru # Hansen fitting (right side) 7W Interspiro pass-thru # BN Berry Amendment compliant G1 Reduced case quantity J CPE sleeve cuff and jam fit glove insert LG 8.25" high shoe cover N NATA sourced NP Respirator fit hood and storm flap NS Non-skid material PI Packaged individually RP Retail packaged SR Skid resistant TV Trade Agreement Act compliant VP Vend packed WG With gloves Retail packaged Vend packed 7 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

8 PERMEATION DATA MID LEVEL 21 Industrial Chemicals ASTM 1001 CAS # Physical Phase Tychem * Tychem * Tychem Tychem Tychem Acetone L imm. imm. >480 >480 >480 Acetonitrile L imm. 60 >480 >480 imm. Ammonia G imm imm. 1, 3-Butadiene G imm. >480 >480 >480 >480 Carbon disulfide L imm. imm. >480 > Chlorine G imm. >480 >480 >480 imm. Dichloromethane L imm. imm. imm. imm. imm. Diethylamine L imm. 15 >480 >480 >480 N, N-Dimethylformamide L imm. 90 >480 >480 >480 Ethyl acetate L imm. imm. >480 >480 >480 Ethylene oxide G imm. imm >480 n-hexane L imm. imm. >480 >480 >480 Hydrogen chloride G imm. >480 >480 >480 >480 Methanol L imm. > >480 imm. Methyl chloride G imm. >480 >480 >480 >480 Nitrobenzene L imm. 57 >480 >480 >480 Sodium hydroxide, 50% L >480 >480 >480 >480 >480 Sulfuric acid L >480 >480 > >480 1, 1, 2, 2-Tetrachloroethylene L imm. imm. >480 >480 >480 Tetrahydrofuran L imm. imm. >480 >480 >480 Toluene L imm. imm. >480 >480 >480 Chemical Warfare Agents** Lewisite (L) L nt > Mustard (HD) L nt >480 2 > Tabun (GA) L nt nt >480 4 >480 4 nt Sarin (GB) L nt >60 3 >480 4 > Soman (GD) L nt nt >480 4 >480 4 >480 3 VX Nerve Agent L nt >480 3 >480 4 >480 4 >480 3 Index of codes: >=greater than, imm. =immediate (<10 minutes), nt=not tested, L=liquid, G=gas Normalized Breakthrough Time (NBT) shown in minutes. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Actual Breakthrough Time in minutes. Permeation testing on industrial chemicals is in accordance with ASTM 739, Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. All tests are conducted at room temperature unless otherwise noted. Reported results are Normalized Breakthrough Times defined by ASTM 739 as the time (in minutes) when the permeation rate reaches 0.1 µg/cm ² /min. The product information contained is current as of the date of publication, but may be revised as new information is developed. Before relying on any performance data for the purchase or performance of products, you should check SafeSPEC.DuPont.com or contact DPP Customer Service at to determine whether there is new information that relates to your intended use or application of the product. NOTE: Numbers reported are averages of samples tested. Sample results vary. All DuPont testing is performed by a third party. **Chemical warfare agents are tested according to the following protocols: 1 Protocol DN3-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 10 g/m ². 2 Protocol DN4-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, for 12 hours at 100 g/m ² (total coverage). 3 Protocol DN5-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 10 g/m ². 4 Protocol DN6-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, for 12 hours at 100 g/m ² (total coverage). All tests are performed at 22 C and 50% R.H. Actual Breakthrough Times, in minutes, are reported. 8 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

9 PERMEATION DATA HIGH LEVEL 21 Industrial Chemicals ASTM 1001 CAS # Physical Phase Tychem Tychem Tychem Tychem Reflector Acetone L >480 >480 >480 >480 Acetonitrile L >480 >480 >480 >480 Ammonia G 133 > >480 1, 3-Butadiene G >480 >480 >480 >480 Carbon disulfide L >480 >480 >480 >480 Chlorine G >480 >480 >480 >480 Dichloromethane L >480 >480 >480 >480 Diethylamine L >480 >480 >480 >480 N, N-Dimethylformamide L >480 >480 >480 >480 Ethyl acetate L >480 >480 >480 >480 Ethylene oxide G >480 >480 >480 >480 n-hexane L >480 >480 >480 >480 Hydrogen chloride G >480 >480 >480 >480 Methanol L 185 >480 >480 >480 Methyl chloride G >480 >480 >480 >480 Nitrobenzene L >480 >480 >480 >480 Sodium hydroxide, 50% L >480 >480 >480 >480 Sulfuric acid L >480 >480 >480 >480 1, 1, 2, 2-Tetrachloroethylene L >480 >480 >480 >480 Tetrahydrofuran L >480 >480 >480 >480 Toluene L >480 >480 >480 >480 Chemical Warfare Agents** Lewisite (L) L >480 1 >480 2 >480 1 >480 1 Mustard (HD) L >480 2 >480 2 >480 2 >480 2 Tabun (GA) L >480 3 >480 4 >480 3 >480 3 Sarin (GB) L >480 4 >480 4 >480 4 >480 4 Soman (GD) L >480 3 >480 4 >480 3 >480 3 VX Nerve Agent L >480 4 >480 4 >480 4 >480 4 Index of codes: >=greater than, imm. =immediate (<10 minutes), nt=not tested, L=liquid, G=gas Normalized Breakthrough Time (NBT) shown in minutes. *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Actual Breakthrough Time in minutes. Permeation testing on industrial chemicals is in accordance with ASTM 739, Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact. All tests are conducted at room temperature unless otherwise noted. Reported results are Normalized Breakthrough Times defined by ASTM 739 as the time (in minutes) when the permeation rate reaches 0.1 µg/cm 2 /min. The product information contained is current as of the date of publication, but may be revised as new information is developed. Before relying on any performance data for the purchase or performance of products, you should check SafeSPEC.DuPont.com or contact DPP Customer Service at to determine whether there is new information that relates to your intended use or application of the product. NOTE: Numbers reported are averages of samples tested. Sample results vary. All DuPont testing is performed by a third party. **Chemical warfare agents are tested according to the following protocols: 1 Protocol DN3-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, at 10 g/m ². 2 Protocol DN4-MIL-STD-282, Method T-209 (HD) or modified for Lewisite, at 100 g/m ² (total coverage). 3 Protocol DN5-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, at 10 g/m ². 4 Protocol DN6-MIL-STD-282, Method T-208 (GB) or modified for GA, GD and VX, at 100 g/m ² (total coverage). All tests are performed at 22 C and 50% R.H. Actual Breakthrough Times, in minutes, are reported. 9 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

10 PRODUCT LINE BY HAZARD When it comes to addressing a broad range of hazards in the workplace, specifiers have many product options from which to select. The process to understand which option matches a given situation can be confusing and taxing. DuPont Personal Protection has tried to reduce some of that burden by providing a complete line of products with supporting information to help guide specifiers through the selection process. To get the most out of your Personal Protective Equipment (PPE), it is necessary to understand where the products are intended to be used. DuPont SafeSPEC is a sophisticated, easy-to-use interactive tool that provides suggestions for chemical protective clothing based on the user s hazard scenario. Our database includes hundreds of chemicals, including warfare agents and the ASTM 1001 standard list of challenge chemicals. This tool can be accessed on our website at SafeSPEC.DuPont.com. To provide a quicker overview of our products and where they are ideally suited for use, we developed the simple guide below. Our goal was to match the level of protection and value for a given exposure hazard. DUPONT TYVEK AND GENERAL PROTECTION PRODUCTS Typical general industrial hazards/description/examples General dirt & grime Animal waste Sanding & grinding waste Spray paint Oil & grease Aerosol Lubricants Hazardous Particles ertilizer Sewage ertilizer Pesticides Asbestos Lead Chromium Garment Tyvek Tyvek Carbon Non-hazardous Aerosol Particles Light liquid splash* Berylium Mold iberglass Radioactive containing Isocyanate particles Light liquid splash* Tyvek Tyvek J ProShield NexGen ProShield Sulfuric acid (18%) Sulfuric acid (30%) Sodium hydroxide (40%) Sodium hydroxide (50%) lame** resistance Generally preferred Acceptable for use *Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure and certain physical properties of the liquid. Tyvek, Tyvek Dual, ProShield, ProShield NexGen, Tyvek C and ProShield 3 garments are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn under the protective garment. Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Tyvek and Tyvek garments use a special type of Tyvek fabric, which has different physical properties and improved chemical resistance properties when compared to fabric used in standard Tyvek garments. Additionally, the seams used in standard Tyvek garments are different than the seams for Tyvek and Tyvek garments. Tyvek garments offer seams that are sewn and then taped, and Tyvek garments offer external sewn seams, where the seam thread is visible on the outside of the garment. Tyvek and Tyvek offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem and Tychem garments with taped seams. ** garments are flame retardant treated, not inherently flame resistant, and are intended to be worn OVER primary flame-resistant protective apparel such as Nomex IIIA. It is the user s responsibility to determine the nature and level of hazard and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under their specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures have shorter breakthrough times and higher penetration rates than the fabric. Please contact DuPont for specific data. If the garment becomes torn, abraded or punctured, end user should discontinue use of garment to avoid potential exposure. Tyvek and Tyvek contain natural rubber latex, which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at so that an investigation can be initiated. LATEX STATEMENT: As of January 1, 2006, DuPont production specifications exclude use of components containing natural rubber latex in the manufacture of DuPont Tyvek IsoClean, Sierra, and ProClean garments. WARNINGS: 1) Tyvek, ProShield NexGen, ProShield 3 and ProShield garments are not flame resistant and should not be used around heat, flame, sparks or in potentially flammable or explosive environments. 2) Garments made of Tyvek, ProShield NexGen, ProShield, ProShield and should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers or other garment surfaces in conditions where slipping may occur. 3) Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 4) Some Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 5) DuPont Tyvek coveralls can be considered for use with the appropriate respirators and other suitable PPE to minimize contact with isocyanate paint aerosols. Tyvek garments are not appropriate if they are getting wet (paint is dripping or running, or wet to the touch) or if spotting is observed on skin or garments worn under the coveralls. Tychem aprons and smocks are available for situations where prolonged liquid exposure may be limited to the front of the torso and/or arms of the wearer. These aprons and smocks can be worn with Tyvek to provide localized protection while limiting the level of thermal discomfort. 10 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

11 PRODUCT LINE BY HAZARD DUPONT TYCHEM CHEMICAL PROTECTION PRODUCTS Typical chemical hazards/examples Garment Brands Exposure Hazardous dry powders & solids Dry pharma chemicals Bloodborne pathogens & biohazards Blood, saliva, human excrement Light chemical splash & aerosols Inorganic acids and bases, salts Moderate liquid chemical splash Organics, solvents Potential flash fire exposure & liquid organic chemicals Methamphetamine Heavy liquid chemical splash (toxics & corrosives) Known carcinogens ChemBio & warfare agents Sarin, Mustard, VX nerve agent Chemical vapors & gases (toxics & corrosives) Chlorine, anhydrous ammonia 1991 lash fire option NPA Ensembles 1991 Liq. gas option Class E Cat 2 Tychem * Tychem * Tychem Tychem Tychem Tychem Tychem Tychem ** ** Tychem Reflector ** ** Generally preferred Acceptable for use *Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. **Tychem Reflector R600T and Tychem 600T/601T have NPA 1991 flash fire option. 11 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

12 Reflector DUPONT TEMPRO SECONDARY LAME-RESISTANT PROTECTION 1 TM120SBUXX SM-6X 1 TM127SBUXX Attached hood SM-6X TM127S 1 TM122SBUXX Attached hood Attached sock boots 2 SM-7X TEMPRO Lightweight, disposable overgarment designed to help protect and preserve primary flame-resistant garments Provides a barrier against non-hazardous particles and aerosols while not contributing to burn injury Won t ignite and continue to burn when exposed to a flame source is blue garments are flame retardant treated, not inherently flame resistant, and are intended to be worn over your primary flame-resistant garments. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. 1 Styles do not have storm flaps. 2 These garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Note: Not all sizes available in all styles. 12 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

13 Reflector DUPONT PROSHIELD BASIC PB120SBUXX PB120SWHXX Storm flap MD-5X PB125SBUXX PB125SWHXX Storm flap MD-5X PB125S PB127SBUXX PB127SGYXX PB127SWHXX Attached hood Storm flap MD-5X PB122SBUXX PB122SWHXX Attached hood Storm flap Attached skid-resistant boots MD-5X PROSHIELD BASIC Comfort and quality at an affordable price Spunbond-meltblown-spunbond (SMS) garments Uses include general maintenance, janitorial/cleaning and other dirty work assignments ProShield is available in blue or white, and gray in style 127 Labcoat PB212SBUXX ront snap closure Two pockets Available in blue only SM-7X Labcoat PB219SBUXX PB219SWHXX Knit collar Set sleeve Knit cuff ront snap closure (6 + 1 adjustable) Pockets (1 left chest pencil, 2 lower front) rock PB267SBUXX PB267SWHXX Mandarin collar Set sleeve Knit cuff Enclosed elastic wrist ront snap closure (6 + 1 adjustable) rock PB271SBUXX PB271SWHXX Mandarin collar MD-4X 13 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

14 DUPONT PROSHIELD 3 Shoe cover P3450SGYXX Elastic opening 5" height ProShield 3 fabric Skid resistant Shoe cover P3450SGYXX0200LG Elastic opening 8.25" height ProShield 3 fabric Skid resistant Boot cover P3452SGYXX Elastic opening 10" height ProShield 3 fabric Skid resistant Boot cover P3454SGYXX Elastic opening 18" height ProShield 3 fabric Skid resistant PROSHIELD 3 Skid-resistant material for shoe/boot covers to help prevent slipping Provides non-hazardous liquid splash protection ProShield 3 is gray LG = 8.25" high shoe cover P3452S Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. WARNING: ProShield 3 should not be used around heat, flames, sparks or in potentially flammable or explosive environments. 14 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

15 DUPONT PROSHIELD NEXGEN NG120SWHXX SM-6X NG125SWHXX SM-5X NG127S NG127SWHXX0025NP Attached hood (respirator fit) 1 Storm flap SM-7X NG122SWHXX Attached hood Attached skid-resistant boots SM-6X PROSHIELD NEXGEN Barrier against a variety of non-hazardous aerosols, liquids and dry particles Microporous film laminated to a nonwoven fabric Uses include automotive refinishing, waste cleanup and sanitation engineering ProShield NexGen is white NP = Respirator fit hood and storm flap Apron NG273BWHXX Bound seams Bound neck and ties Bib style 28" x 36" Sleeve NG500SWHXX Elastic top Elastic wrist 18" length Labcoat NG212SWHXX ront snap closure Two pockets Shoe cover NG451SWHXX Elastic opening 5" height ProShield NexGen fabric shaft PVC sole SM-XL Reflector Boot cover NG456SWHXX Elastic opening Elastic ankle 18" height ProShield NexGen fabric shaft PVC sole SM XL 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: ProShield NexGen should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of ProShield NexGen fabric should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. 15 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

16 DUPONT TYVEK DUAL TD127S TD125SWBXX0025CM Storm flap Thumb loops Elastic waist MD-4X Tyvek front ProShield back TD127SWBXX0025CM Attached hood (respirator fit) 1 Storm flap Thumb loops Elastic waist MD-4X TYVEK DUAL Tyvek Dual garments provide an ideal balance of comfort, durability and protection for workers Comfort fit design helps enable a greater range of movement while stretching and bending Designed for very specific applications where demanding comfort requirements are combined with limited protective requirements for frontal exposures Well suited for workers who are involved in a variety of strenuous activities that can lead to heat stress in applications that include: - Wind turbines - Utilities - Composites manufacturing - Maintenance - Boat manufacturing - Glass manufacturing - Remediation DuPont Tyvek fabric on the front Tyvek fabric is composed of flashspun high-density polyethylene, which creates a unique nonwoven material available only from DuPont Tyvek fabric provides an ideal balance of protection, durability and comfort compared to any limiteduse fabric technology Tyvek fabric s durability delivers a consistently better barrier, even after wear and abrasion Tyvek is white DuPont ProShield fabric on the back ProShield fabric has been optimized for comfort, softness and breathability ProShield fabric is designed for non-hazardous dry particle and light liquid splash applications ProShield is made from a polypropylene spunbond-meltblownspunbond (SMS) fabric ProShield is blue 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek and ProShield should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek and ProShield fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. Reflector 16 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

17 DUPONT TYVEK TY120SWHXX MD-7X TY120SWHXX0006G1 MD-4X TY120SWHXX0025N MD-7X TY120SWHXX0006RP L/XL and 2X TY120SWHXX0025VP MD-7X Storm flap Elastic waist NATA Comfort fit design TY121SWHXX0025NS Storm flap Attached skid-resistant boots MD-7X TY120S TYVEK An ideal balance of protection, durability and comfort Comfort fit design allows for a greater range of motion and fewer blowouts Breathable inherent barrier protection against hazardous dry particles, aerosols and non-hazardous light liquid splash Excellent abrasion resistance; protects against hazardous particles down to one micron in size When used with other PPE, can help reduce risk of cross-contamination in pandemic response activities One garment for many applications: - General maintenance/operations - Microcrystalline silica - Lead abatement - Environmental cleanup - Agriculture - Asbestos abatement - ood processing - Mold remediation - Spray painting - Crime scene investigation Tyvek is white G1 = Reduced case quantity NATA N = NATA/ compliant NS = Non-skid material RP = Retail packaged TY122SWHXX MD-7X TY122SWHXX0006G1 MD-4X TY122SWHXX0025N MD-7X TY122SWHXX0025VP MD-7X Attached hood (respirator fit) 1 Storm flap Elastic waist Attached skid-resistant boots Comfort fit design TY127SWHXX MD-7X TY127SWHXX0006G1 MD-4X TY127SWHXX0025N MD-7X TY127SWHXX0006RP L/XL and 2X TY127SWHXX0025VP MD-7X Attached hood (respirator fit) 1 Storm flap NATA Elastic waist Comfort fit design TY125SWHXX MD-7X TY125SWHXX0006G1 MD-4X TY125SWHXX0025VP MD-7X Storm flap Elastic waist Comfort fit design TY151SWHXX ront snap closure XL-3X Only N option codes are NATA/ compliant. 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek and ProShield should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek and ProShield fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. VP = Vend packed 17 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com Reflector

18 DUPONT TYVEK TY127S rock TY210SWHXX SM-7X TY210SWHXX0030VP MD-4X ront snap closure rock TY211SWHXX ront snap closure Knee length SM-7X rock TY216SWHXX Mandarin collar ront snap closure SM-5X Labcoat TY212SWHXX SM-7X TY212SWHXX0008G1 MD-4X TY212SWHXX0030VP MD-4X TY212SWHXX0030N SM-7X ront snap closure Two pockets NATA Shirt TY303SWHXX SM-7X TY303SWHXX0012G1 MD-4X TY303SWHXX0050VP MD-3X ront snap closure Long sleeve Pants TY350SWHXX SM-7X TY350SWHXX0012G1 MD-4X TY350SWHXX0050VP MD-3X Elastic waist Apron TY273BWHXX TY273BWHXX0100VP Bound seams Bound neck & ties Bib style 28" x 36" Sleeve TY500SWHXX TY500SWHXX0200N Elastic top Elastic wrist 18" length Hood TY657SWHXX Pullover Elastic face Shoulder length NATA Only N option codes are NATA/ compliant. 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Reflector Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 18 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

19 DUPONT TYVEK BOOT AND SHOE COVERS Shoe cover TY450SWHXX Tyvek fabric Elastic opening 5" height Shoe cover TY450SWHXX0200LG Tyvek fabric Elastic opening 8.25" height Shoe Cover TY451SWHXX0024RP Serged seam Gripper skid-resistant sole 5 high Elastic opening Retail packaged Boot cover TY452SWHXX Tyvek fabric Elastic opening 10 height C454S TYVEK C Skid-resistant materials for shoe/ boot covers to prevent slipping Tyvek with riction Coating Tyvek C is gray LG = 8.25" high shoe cover N = NATA/ Compliant RP = Retail packaged SR = Skid resistant Boot cover TY454SWHXX Tyvek fabric Elastic opening 18 height Shoe cover Tyvek C C450SGYXX C450SGYXX0200N Tyvek C fabric Elastic opening Elastic toe, sole and heel seam 5 height Skid resistant NATA Boot cover TY454SWHXX0100SR Tyvek fabric Tyvek C sole Elastic opening Elastic ankle 18 height Skid resistant LG-XL Boot cover Tyvek C C454SGYXX Tyvek C fabric Elastic opening 18" height Skid resistant Only N option codes are NATA/ compliant. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Reflector Tyvek with riction Coating (C) has been specially treated to promote ink/coating adhesion. This treatment lowers the typical bulk liquid holdout values for Tyvek fabric. Products with this treatment offer limited bulk liquid holdout. If barrier protection from liquid splash is required, please consider a non-treated Tyvek style or other substrate. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 19 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

20 DUPONT TYVEK XPERT / TYVEK PLUS TY198SWHXX External serged seam Attached hood Storm flap CE certified Category III Type 5-B and 6-B SM-7X TY198S TY198T TY198TWHXX Taped seam Attached hood (respirator fit) 1 Storm flap CE certified Category III Type 4-B, 5-B and 6-B SM-7X TYVEK XPERT Tyvek garments are composed of flashspun high-density polyethylene, which creates a unique, nonwoven material available only from DuPont Suitable for applications such as pharmaceutical handling, chemical processing, automatic spray painting, maintenance and many others Chemical protective clothing, Category III Type 5-B and 6-B Tyvek is white TYVEK PLUS Tyvek garments are composed of flashspun high-density polyethylene, which creates a unique, nonwoven material available only from DuPont Tyvek Type 4/5/6 coveralls offer the following safety and comfort benefits: - Chemical protective clothing, Category III Type 4-B, 5-B and 6-B - Protection against infective agents (EN 14126), including resistance to penetration by blood and body fluids using synthetic blood (ISO 16603) - abric and seams offer chemical permeation barrier to low concentration water-based inorganic chemicals Tyvek is white RP = Retail packaged Reflector 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 20 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

21 DUPONT TYVEK J TJCHA5TWHXX000 Taped seam Attached hood (respirator fit) 1 Storm flap CE certified Category III Type 3-B, 4-B, 5-B and 6-B SM-3X TJCHA5T TYVEK J Tyvek J garments combine resistance to low-concentration, water-based, inorganic chemicals (even under pressure) with the durability of Tyvek thanks to their innovative fabric technology and enhanced garment design Chemical protective clothing, Category III Type 3-B, 4-B, 5-B and 6-B Suitable for applications such as industrial cleaning; chemical packaging and redistribution; waste treatment and disposal; environmental remediation and many others Tyvek is white 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Reflector Bound and sewn seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tyvek should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Garments made of Tyvek fabrics should have slip-resistant or anti-slip materials on the outer surface of boots, shoe covers, or other garment surfaces in conditions where slipping could occur. Certain accessory items are also identified as Make to Order. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 21 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

22 DUPONT TYCHEM 120S 120SYLXX SM-7X 120BYLXX Bound seams Storm flap with tape closure MD-7X 125SYLXX MD-7X 125SYLXX0006RP L/XL and 2X Storm flap 125BYLXX Bound seams, MD-6X 125TYLXX000400, MD-7X Storm flap with tape closure TYCHEM Light liquid splash protection Used extensively in the petroleum; pulp and paper; food and chemical processing; and pharmaceutical industries Tychem is polyethylene-coated Tyvek fabric lexible, durable and lightweight Tychem provides at least 30 minutes of protection against >40 chemical challenges When used with other PPE, can help reduce the risk of cross-contamination in pandemic preparedness activities Meets ASTM 1670 and ASTM 1671 tests, offering bloodborne pathogen protection Tychem is yellow for high visibility BN = Berry Amendment compliant BERRY RP = Retail packaged 122SYLXX Attached hood Storm flap MD-7X Reflector Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Serged seam coveralls do not have a storm flap. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 22 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

23 DUPONT TYCHEM 122BYLXX Bound seams, MD-6X 122BYLXX0012BN Bound seams, MD-6X 122TYLXX000400, MD-6X Attached hood Storm flap with tape closure BERRY 127BYLXX Bound seams 127TYLXX Attached hood Storm flap MD-7X 122BYL 127SYLXX MD-7X 127SYLXX0006RP L/XL and 2X Attached hood Apron 273BYLXX Bound neck & ties Bib style 36" long Apron 275BYLXX Bound seams Raw edge neck with snaps Attached long sleeves Waist ties 44" long Apron 278BYLXX Bound seams Attached long sleeves Bound yoke neck without snaps Waist ties 52" long Sleeve 500BYLXX Bound seam Elastic top Elastic wrist 18" length Only BN option codes are Berry Amendment compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Serged seam coveralls do not have a storm flap. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. Reflector 23 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

24 DUPONT TYCHEM 120BWHXX Bound seams, SM-6X 120TWHXX000400, MD-4X Storm flap with tape closure 120T 122T 125BWHXX Bound seams, SM-6X 125TWHXX000600, MD-5X Storm flap with tape closure TYCHEM Effective protection against a range of chemicals Uses include waste management, hazardous response and nuclear environments Tychem is Saranex 23-P film laminated to Tyvek fabric Rugged and durable Tychem is white for high visibility Tychem provides at least 30 minutes of protection against >120 chemical challenges When used with other PPE, can help reduce the risk of cross-contamination in pandemic preparedness activities Meets ASTM 1670 and ASTM 1671 tests, offering bloodborne pathogen protection BN = Berry Amendment compliant BERRY 121BWHXX Bound seams, MD-6X 121TWHXX000400, MD-5X Storm flap with tape closure 122BWHXX0012BN Bound seams 122TWHXX0006BN Attached hood Storm flap with tape closure MD-7X BERRY Reflector 122BWHXX Bound seams, MD-7X 122TWHXX000600, MD-6X Attached hood Storm flap with tape closure Only BN option codes are Berry Amendment compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 24 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

25 DUPONT TYCHEM 127B 127BWHXX Bound seams 127TWHXX Attached hood Storm flap with tape closure MD-7X 128TWHXX Attached hood (respirator fit) 2 Storm flap with tape closure Outer boot flaps with elastic SM-5X Apron 274BWHXX Bound neck & ties Bib style 36" long Apron 275TWHXX Raw edge neck with snaps Attached long sleeves Waist ties 44" long Apron 278BWHXX Bound seams Bound yoke neck without snaps Attached long sleeves Waist ties 52" long Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All standard bound and taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Reflector Serged and/or bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 25 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

26 DUPONT TYCHEM C3122TTNXX0006BN SM-5X C3122TTNXX SM-7X Attached hood Storm flap with tape closure C3125TTNXX Storm flap with tape closure SM-5X BERRY TYCHEM Strong and durable garments with broad chemical barrier Tychem is a multi-layer barrier film laminated to a durable polypropylene fabric Tychem provides at least 30 minutes of protection against >145 chemical challenges Uses include chemical and petrochemical handling, hazardous materials/waste cleanup, industrial HazMat teams, utilities and domestic preparedness Tychem is tan for discretionary purposes Tychem 198T/199T are certified to NPA K = Double storm flap w/zipper & hook-and-loop closure BN = Berry Amendment compliant BERRY J = CPE sleeve cuff and jam fit glove insert Hood C3651TTNXX EX (extra wide) faceshield (20 mil PVC) Pullover Hook-and-loop waist closure C3127T C3127TTNXX Attached hood Storm flap with tape closure SM-7X Apron C3275TTNXX Bound snap neck Attached long sleeves Waist ties 44" long Encapsulated Level B C3526TTNXX Rear entry Standard faceshield (20 mil PVC) Zipper closure Double storm flaps with hook-and-loop closure One exhaust vent lat back (airline access) Outer boot flaps Bib overall C3360TTNXX Adjustable webbing straps with closure Rear entry C3128TTNXX C3128TTNXX0006BN C3128TTNXX00062K Attached hood (respirator fit) 2 Storm flap with tape closure Outer boot flaps with elastic SM-5X Encapsulated Level B C3525TTNXX ront entry Standard faceshield (20 mil PVC) Zipper closure Double storm flaps with hook-and-loop closure One exhaust vent flat back Air access left side Encapsulated Level B C3528TTNXX Rear entry Standard faceshield (20 mil PVC) Zipper closure Double storm flaps with hook-and-loop closure Two exhaust vents Expanded back Outer boot flaps BERRY ront entry Rear entry Reflector 26 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

27 DUPONT TYCHEM C3122T Jacket C3670TTNXX C3670TTNXX0006J Mandarin collar Double storm flaps with hook-and-loop closure Combo suit (jacket and bib overall) C3750TTNXX JACKET Mandarin collar Jam fit cuff Double storm flaps + BIB OVERALL Adjustable webbing straps with closure TYCHEM HD DESIGN Tychem HD garments are intended for use by law enforcement, HazMat and hospital personnel Offered in respirator fit hood or collar style for use with a PAPR; ideal for hospital first receiver applications Tychem HD garments may include integrated gloves and improved closures to reduce response time; deliver a high level of dexterity and tactility; and improve protection BN = Berry Amendment compliant BERRY WG = With gloves Reflector HD design C3184TTNXX Double storm flaps with hook-and-loop closure Attached jam fit removable/ field replaceable neoprene outer/ multi-layer laminate inner gloves Outer boot flaps HD design Certified to NPA 1992 C3198TTNXX C3198TTNXX0006BN Attached hood (respirator fit) 2 Double storm flaps with hook-and-loop closure SM-5X HD design Certified to NPA 1992 C3199TTNXX C3199TTNXX0006BN Attached hood (respirator fit) 2 Double storm flaps with hook-and-loop closure Outer boot flaps SM-5X BERRY BERRY HD design Certified to NPA 1992 C3199TTNXX0006WG Attached hood (respirator fit) 2 Double storm flaps with hook-and-loop closure Attached Guardian butyl outer/ multi-layer laminate inner gloves Outer boot flaps BERRY SM-5X HD design C3185TTNXX Attached hood (respirator fit) 2 Double storm flaps with hook-and-loop closure Attached jam fit removable/ field replaceable neoprene outer/ multi-layer laminate inner gloves Outer boot flaps HD design Certified to NPA 1992 C3198TTNXX0006WG Attached hood (respirator fit) 2 Double storm flaps with hook-and-loop closure Attached Guardian butyl outer/ multi-layer laminate inner gloves SM-5X BERRY Only BN and WG option codes are Berry Amendment compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a storm flap or double storm flap, see product description for details. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 27 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

28 DUPONT TYCHEM T169T T145TGYXX0006TV T145TGYXX Attached hood (respirator fit) 2 Storm flap with tape closure SM-5X T145T T169TGYXX0006TV T169TGYXX Attached hood (respirator fit) 2 Storm flap with tape closure SM-5X TYCHEM Widely used by military personnel and first responders for chemical warfare situations Strong and durable garments with broad chemical barrier or use when potential exposure to industrial chemicals and chemical warfare agents exists Successfully tested by Soldier and Biological Chemical Command (SBCCOM) in Aberdeen, MD Tychem is a barrier film laminated to Tyvek Tychem provides at least 30 minutes of protection against >180 chemical challenges Tychem is available in orange for high visibility and gray for discretionary purposes TV = compliant PI = Packaged individually Reflector T186TGYXX0006PI Attached hood (respirator fit) 2 Storm flap with tape closure Attached butyl gloves Outer boot flaps MD-5X Only TV option codes are compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 28 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

29 DUPONT TYCHEM TYCHA5T TYCHA5TORXX Attached hood (respirator fit) 1 Self-adhesive double zipper Storm flap closure Thumb loops Chin flap MD-2X Gown TYPL50SGYXX Wrap-over rear closure with tie Partial body chemical protective clothing Category III Type PB[3] Shin length SM and L/2X Apron TYPA30SGYXX No seams Neck and waist ties Shin length Sleeve TYPS32SGYXX Taped seam Elastic top Elastic wrist 18" length Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. Reflector 29 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

30 DUPONT TYCHEM THERMOPRO TP198T Certified to NPA 1992, NPA 2112 and Meets NPA 70E Category 2 TP198TGYXX TP198TGYXX0002BN TP198TORXX TP198TORXX0002BN Attached hood with drawstring (respirator fit) 2 Double storm flaps with hook-and-loop closure Hemmed ankles SM-5X BERRY Certified to NPA 1992, NPA 2112 and Meets NPA 70E Category 2 TP199TGYXX TP199TGYXX0002BN TP199TORXX TP199TORXX0002BN Attached hood with drawstring (respirator fit) 2 Double storm flaps with hook-and-loop closure Outer boot flaps SM-5X BERRY TYCHEM THERMOPRO Provides triple hazard protection from chemicals, flash fire and electric arc, combining the trusted chemical protection of DuPont Tychem with the flame and arc flash protection of DuPont Nomex into a single garment Tychem 198T/199T meet the requirements of NPA 1992 Standard on Liquid-Splash Protective Ensembles and Clothing for Hazardous Materials Emergencies and NPA 2112, Standard on lame-resistant Garments for Protection of Industrial Personnel Against lash ire Tychem 198T/199T exceed the Hazard Risk Category 2 requirement of 8 cal/cm2 outlined in NPA 70E, Standard for Electrical Safety in the Workplace Constructed for heavy use, yet lightweight and easy to wear Tychem provides at least 30 minutes of protection against >180 chemical challenges Tychem has an arc rating of 15.2 cal/cm2 Ebt Tychem is available in orange for high visibility and gray for discretionary purposes BN = Berry Amendment BERRY compliant Only BN option codes are Berry Amendment compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 30 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com Reflector

31 DUPONT TYCHEM THERMOPRO Backless coverall TPTORXX Open back coverall Buckle closure around waist Snap closure around neck LG-5X Sleeved apron TP275TGYXX TP275TORXX Two buckle closure system 45" long TP750T Combo suit (jacket and bib overall) TP750TGYXX TP750TORXX JACKET Mandarin collar Double storm flaps BIB OVERALL + Adjustable webbing straps with closure Apron TP284TGYXX TP284TORXX Sleeveless apron Waist strap Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Reflector Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 31 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

32 DUPONT TYCHEM 611T Certified to NPA 1994 Class 2 and NPA TYLXX SCBA face piece interface hood Rear zipper closure Triple storm flap with hook-and-loop closure Attached jam fit removable/ field replaceable neoprene outer/ multi-layer laminate inner gloves Outer boot flaps MD-4X Encapsulated Level A 557TYLXX00017R Rear entry EX (extra wide) three-layer faceshield (PVC 40 mil / Teflon 5 mil / PVC 20 mil) Gas-tight PVC zipper closure Double storm flaps with hook-and-loop closure Two exhaust valves lat back Internal adjustment belt Attached internal multi-layer laminate gloves Attached butyl gloves Outer boot flaps with elastic XL-4X Rear entry TYCHEM Broad protection for hazardous material handlers Uses include chemical handling and petrochemical manufacturing Multi-layer composite barrier laminated to a strong, nonwoven substrate Tear-, puncture- and abrasionresistant for lasting, consistent protection Tychem provides at least 30 minutes of protection against >280 chemical challenges Tychem 611T is certified to NPA 1994 Class 2 and NPA 1992 Tychem 611T is designed to be used with specific NIOSH approved CN SCBAs Tychem is yellow for high visibility 7R = MSA dual purpose # Hansen fitting (left front waist) BN = Berry Amendment compliant BERRY Encapsulated Level B 528TYLXX Rear entry Standard faceshield (20 mil PVC) Zipper closure Double storm flaps with hook-and-loop closure Two exhaust vents Expanded back Outer boot flaps with elastic MD-4X Rear entry Reflector Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Storm flaps: All taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Option 2K garments have a hook-and-loop storm flap closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 32 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

33 DUPONT TYCHEM 128T 125TYLXX Double storm flaps with tape closure SM-5X 127TYLXX SM-6X 127TYLXX0002BN SM-5X Attached hood (respirator fit) 2 Double storm flaps with tape closure BERRY 128TYLXX SM-7X 128TYLXX0002BN SM-5X Attached hood (respirator fit) 2 Double storm flaps with tape closure BERRY Outer boot flaps with elastic Hood 651TYLXX Standard faceshield (20 mil PVC) Pullover Hook-and-loop waist closure Combo suit jacket and bib overall 753TYLXX JACKET Mandarin collar Jam cuff Double storm flaps + BIB OVERALL Adjustable webbing straps with closure Packaged individually Only BN option codes are Berry Amendment compliant. Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a single storm flap with a pressure-sensitive tape closure. Option 2K garments have a hook-and-loop storm flap closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. Reflector 33 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

34 DUPONT TYCHEM 555T HazMat Encapsulated Level A 554TLYXX MD-4X 554TLYXX00015C MD-4X 554TLYXX00017S call for sizing ront entry Double taped seams EX (extra wide) three-layer faceshield (PVC 40 mil/teflon 5 mil/pvc 20 mil) Gas-tight PVC zipper closure Double storm flaps with hook-and-loop closure Two exhaust valves Expanded back Internal adjustment belt Attached internal multi-layer laminate gloves Attached outer butyl or Viton gloves Knee wear pads Outer boot flaps with elastic NATA ront entry TYCHEM Premium protection against toxic and corrosive gaseous, liquid and solid chemicals Leading garment chosen by HazMat responders worldwide Extremely durable, punctureand tear-resistant fabric Wide range of garment styles, including totally encapsulated, vapor protective Level A and liquid-splash protective Level B suits Tychem provides at least 30 minutes of protection against >320 chemical challenges Tychem 612T/613T certified to NPA 1994 Class 2 Tychem is high-visibility lime yellow All Tychem NATA encapsulated suits are NATA/ compliant 5C = Showa Best 892 outer glove 7R = MSA dual purpose # Hansen fitting (left front waist) 7S = Scott pass-thru # Hansen fitting (right side) HazMat Encapsulated Level A 555TLYXX MD-4X 555TLYXX00015C MD-4X 555TLYXX00017S call for sizing Rear entry Double taped seams EX (extra wide) three-layer faceshield (PVC 40 mil/teflon 5 mil/pvc 20 mil) Gas-tight PVC zipper closure Double storm flaps with hook-and-loop closure Two exhaust valves Expanded back Internal adjustment belt Attached internal multi-layer laminate gloves Attached outer butyl or Viton gloves Knee wear pads Outer boot flaps with elastic Encapsulated Level A Certified to NPA 1994 Class 2 612TLYXX ront entry, MD-4X 613TLYXX Rear entry, call for sizing Double taped seams EX (extra wide) three-layer faceshield (PVC 40 mil/teflon 5 mil/pvc 20 mil) Gas-tight zipper closure Double storm flap Two exhaust valves Expanded back Attached two-layer gloves (multi-layer laminate/neoprene) Outer boot flaps with elastic NATA NATA 612T ront entry Reflector Rear entry 613T Rear entry 34 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

35 DUPONT TYCHEM 554T HazMat Encapsulated Level A 552TLYXX00017R ront entry Double taped seams Standard three-layer faceshield (PVC 40 mil/teflon 5 mil/ PVC 20 mil) Gas-tight PVC zipper closure Double storm flap with hook-and-loop closure ront Two exhaust valves entry Internal adjustable belt lat back Attached Guardian butyl outer/ multi-layer laminate internal gloves Outer boot flaps with elastic LG-2X NATA Encapsulated Level B 527TLYXX ront entry Standard faceshield (40 mil PVC) Zipper closure Double storm flaps with hook-and-loop closure Two exhaust vents Expanded back Outer boot flaps with elastic ront entry NATA 527T 128TLYXX Attached hood (respirator fit) 2 Double storm flaps with tape closure Outer boot flaps with elastic SM-6X NATA Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a storm flap or double storm flap, see product description for details. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. Reflector 35 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

36 DUPONT TYCHEM RESPONDER RC550T Encapsulated Level A RC550TTNXX MD-4X RC550TTNXX00017C call for sizing RC550TTNXX00017S call for sizing RC550TTNXX00017W call for sizing ront entry Double taped seams Two-layer faceshield (Teflon 5 mil / PVC 40 mil) Gas-tight zipper closure Double storm flap with hook-and-loop closure Two Pirelli exhaust valves Expanded back Attached butyl gloves (mil. spec. glove) Outer boot flaps ront entry NATA TYCHEM RESPONDER High-level protection against toxic and corrosive gaseous, liquid and solid chemicals Used for military weapon demilitarization Suited for HazMat and domestic preparedness situations Lightweight fabric of multiple film barriers laminated to both sides of a polypropylene fabric Tychem Responder provides at least 30 minutes of protection against >320 chemical challenges Tychem Responder is tan for discretionary purposes All Tychem Responder suits are NATA/ compliant 7C = MSA connector pass-thru CAMDS (#491335) right side 7S = Scott pass-thru # Hansen fitting (right side) 7W = Interspiro pass-thru # NATA RC128TTNXX Double taped seams Attached hood (respirator fit) 2 Double storm flap with hook-and-loop closure Attached butyl gloves (mil. spec. glove) with attached conical cuff for jam fit Outer boot flaps Reflector NATA Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. 2 Respirator fit hoods are designed with a longer zipper, extending to the chin for complete coverage of the neck area. Standard hoods only extend to the neck. See page 5 for photos. Storm flaps: All taped seam coveralls have a double storm flap with a hook-and-loop closure. Seams and closures have less barrier than fabric. Note: Not all sizes available in all styles. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 36 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

37 DUPONT TYCHEM RELECTOR DUPONT TYCHEM 600/601 R600T 600T ully Encapsulated Level A Tychem Reflector Certified to NPA 1991 R600TSVXX R600TSVXX00017M R600TSVXX00017N ront entry NATA Single skin multi-layer construction Triple taped seams Three-layer faceshield (PVC 40 mil/teflon 5 mil/pvc 20 mil) Gas-tight zipper closure Double storm flaps with hook-and-loop closure Two Pirelli exhaust valves Expanded back Glove liners Multi-layer attached gloves (multi-layer laminate/neoprene/ Kevlar knit) Outer boot flaps ront entry TYCHEM RELECTOR Single skin garment offers broad chemical holdout Ideally suited for industrial and HazMat situations Chemical protection in one garment that is easy to don and doff Tychem Reflector provides at least 30 minutes of protection against >290 chemical challenges Certified to NPA 1991, with flash fire escape and liquefied gas options Tychem Reflector is high-visibility silver All Tychem Reflector suits are NATA/ NATA compliant 7M = MSA dual purpose w/oster fitting N = MSA quick fill w/schrader fitting Please note that Tychem fabrics have different permeation performance. Please check SafeSPEC on our website for permeation data that meets your specific needs. Stock/Make to Order designations are based on sales volume and production efficiencies. Therefore, designations are subject to change without notice. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. Tychem ensembles are certified to NPA 1991, assuming both the aluminized fiberglass overcover and chemical protective inner suit are worn, as well as any other necessary protection such as respirators, boots, etc. Seams and closures have less barrier than fabric. TYCHEM 600/601 ENSEMBLES Suits provide excellent chemical holdout Ideally suited for industrial and HazMat situations Tychem suit with aluminized fiberglass overcover Certified to NPA 1991, with flash fire escape and liquefied gas options Outer shell is high-visibility silver All Tychem ensembles are NATA/ compliant 7S = Scott pass-thru # Hansen fitting (right side) WARNINGS: 1) Suits do not provide thermal skin protection for direct contact with hot solids or liquids. They do not provide protection from continuous radiant heat sources such as furnaces or smelters. 2) Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem, Tychem Reflector and Tychem styles 600T/601T (with aluminized outer suit) garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. ully Encapsulated Level A Tychem ensembles Certified to NPA TLYXX ront entry, MD-4X 601TLYXX Rear entry, call for sizing 601TLYXX00017S Rear entry, call for sizing INNER SUIT Double taped seams EX (extra wide) three-layer faceshield (PVC 40 mil/teflon 5 mil/ Inner PVC 20 mil) suit Gas-tight zipper closure Double storm flap our exhaust valves Expanded back Attached three-layer gloves (multi-layer laminate/ neoprene/kevlar knit) Outer boot flaps with elastic OUTER SUIT Aluminized fiberglass Sewn Nomex seams EX (extra wide) faceshield (Lexan 20 mil) Storm flap with hook-and-loop closure our exhaust vents Expanded back 37 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com NATA Reflector Inner suit NATA Outer suit 600T ront entry Outer suit 601T Rear entry

38 ACCESSORIES OR TYCHEM GARMENTS Air relief valve Pirelli exhaust valve Air relief valve Exhaust valve Exhaust diaphragm /cs /cs /cs Pirelli Exhaust diaphragm /cs /cs /cs Glove ring assembly Level B Butyl o-rings PVC glove rings Glove ring assembly Male glove insert Cool-Guard vest BU Personal cooling product that works to reduce body heat BU Vest only Spare set (4) Cool-Guard refills Universal pressure test kit UV The universal pressure test kit is designed for periodic air pressure testing on all Level A fully encapsulated suits. This compact, lightweight kit is completely selfcontained, requiring no external air supply. Adapters for test kits Pirelli Two adapters for DuPont kit to test Tychem suits Tychem fully encapsulated training suit 586YXX ront entry, MD-4X 586YXX00017W ront entry, MD-4X 586TLYXX ront entry, MD-6X 587YXX Rear entry, MD-4X EX (extra-wide) faceshield (20 mil PVC) Zipper closure Storm flap over zipper Internal waist belt Expanded back Attached butyl gloves Outer boot flaps Clearly labeled as a training suit NATA Additional components available, please call Customer Service. or a complete list of pass-thru option codes, please see page 7. or more detailed information regarding pass-thrus, please call Customer Service. 1 These Tychem garments have attached socks made of the garment material. These attached socks must be worn inside protective outer footwear and are not suitable as outer footwear. These attached socks do not have adequate durability or slip resistance to be worn as the outer foot covering. WARNING: Tychem should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Only Tychem garments are designed and tested to help reduce injury during escape from a flash fire. Users of Tychem garments should not knowingly enter an explosive environment. Consult the Tychem user manual, located on our website, for instructions on proper use, care and maintenance of your Tychem garments. 38 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

39 SIZING PROTECTIVE GARMENT SIZING CHART 7'6" 229 cm 7'4" 224 cm 7'2" 218 cm 7X 7'0" 213 cm 6'10" 208 cm 6'8" 203 cm 5X 6X 6'6" 198 cm 4X Height 6'4" 193 cm 6'2" 188 cm 2X 3X 6'0" 183 cm 5'10" 178 cm XL 5'8" 173 cm 5'6" 168 cm LG 5'4" 163 cm SM MD 5'2" 157 cm 5'0" 152 cm 90 lb 41 kg 110 lb 50 kg 130 lb 59 kg 150 lb 68 kg 170 lb 77 kg 190 lb 86 kg 210 lb 95 kg 230 lb 104 kg 250 lb 113 kg 270 lb 122 kg 290 lb 132 kg 310 lb 141 kg 330 lb 150 kg 350 lb 159 kg 370 lb 168 kg Weight PROTECTIVE GARMENT SIZING CHART OR ULLY ENCAPSULATED SUITS 39 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

40 DUPONT CONTROLLED ENVIRONMENTS DUPONT QUALITY SYSTEMS OR CLEANROOM GARMENTS DuPont single-use garments for controlled environments offer the following standards of quality: The DuPont Controlled Environments quality management system is ISO 9001:2008 registered DuPont Tyvek IsoClean sterile garments have a sterility assurance level of Irradiation doses are validated in accordance with ANSI/AAMI/ISO through bioburden and dose verification testing DuPont Tyvek IsoClean sterile garments are gamma irradiated in a facility that is registered by ISO quality standard and adheres to the requirements of ANSI/AAMI/ISO A Certificate of Sterility and a Certificate of Compliance come with every shipment of sterile Tyvek IsoClean single-use garments Dose audits are conducted quarterly to maintain dose validation Customers are invited to audit our manufacturing and sterilization facilities Quality documentation is readily available and accurate when requested to help meet customer requirements Lot traceability is maintained through garment manufacturing, processing and sterilization THE SUPERIORITY O SINGLE-USE GARMENTS ROM DUPONT DuPont sterile cleanroom garments, designed for single use, offer meaningful advantages in today s challenging cleanroom environments, including: Quality single-use garments are not subjected to multiple cycles of wearing, laundering and sterilization, so fabric barrier and strength are consistent and predictable. Also, DuPont Controlled Environments garments help minimize cross-contamination risk because clean-processing and packaging are done in a facility that only handles new garments lexibility the DuPont single-use apparel program allows you to order only the quantities that you plan to use, which offers flexibility as your needs change Cost Control single-use garments help eliminate budget uncertainties associated with garment repair, damage and loss, helping you to better predict expenditures Among the most popular products in the DuPont Controlled Environments portfolio, DuPont Tyvek IsoClean clean-processed and sterile single-use garments offer an ideal balance of protection, durability and comfort. In addition, they feature the lowest linting and particle shedding of any garments in the DuPont portfolio. CHOOSE ROM THESE OPTIONS: CS = Clean and Sterile: clean-processed, individually packaged and sterilized by gamma irradiation 0S = Sterile: individually packaged and sterilized by gamma irradiation 0C = Clean: clean-processed, individually packaged 00 or 0B = Bulk packaged PI = Individually packaged in an opaque bag 40 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

41 DUPONT CONTROLLED ENVIRONMENTS DUPONT CONTROLLED ENVIRONMENTS GARMENTS DUPONT TYVEK ISOCLEAN, TYVEK MICRO-CLEAN 2-1-2, DUPONT PROCLEAN Environments/ Hazards Clean- Processed Sterile DuPont Tyvek DuPont Tyvek IsoClean Micro-Clean Sterile Clean- Processed Non-Sterile Bulk Non-Sterile DuPont ProClean * Sterile Non-Sterile** Non-Sterile Considerations ISO Class 5 Aseptic Cleanrooms (ormer ED-STD- 209E; Class 100) Tyvek IsoClean sterile garments offer excellent cleanliness, barrier and sterility assurance level. Environments ISO Class 6, 7, and 8 Bioburden Control Areas (ormer ED-STD- 209E; Class 1000, 10,000 and 100,000) ISO Class 6, 7, and 8 Cleanrooms (ormer ED-STD-209E; Class 1000, 10,000 and 100,000) Tyvek IsoClean sterile garments offer excellent cleanliness, barrier and sterility assurance level. Tyvek provides an inherent particle barrier and durability, and is low linting. Clean processing and bound seams should be considered for more critical environments. Non-hazardous, dry particles * Tyvek provides an inherent barrier against small particles. Bound seam garments offer a higher level of protection than serged seam garments. Non-hazardous, light liquid splash * ProClean provides an effective barrier against a variety of common non-hazardous liquids. Hazards Hazardous powders Notice: DuPont Controlled Environments garments should not be used in potentially explosive or flammable environments. Use bound seamed garments when working with hazardous powders. Hazardous liquid splash Examples: organic solvents, caustics Please refer to our Tychem product line for liquid and vapor chemical protection. Electric arc, industrial fire hazard, welding Do Not Use Please refer to Nomex for flame-resistant apparel. Controlled Environment garments are not suitable for firefighting activities, nor for protection from hot liquids, steam, molten metals, welding, electric arc or thermal radiation. Comparison within the DuPont portfolio: Best Better (Blank) Not recommended *Barrier properties may be compromised through use. **Packaged individually. 41 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com

42 DUPONT CONTROLLED ENVIRONMENTS IC253BWHXX00250B SM-5X IC253BWHXX00250S SM-5X IC253BWHXX00250C SM-5X IC253BWHXX0025CS SM-7X Bound seams Bound neck Dolman sleeve Covered elastic wrists Covered elastic ankles IC105SWHXX IC105SWHXX00250C IC105SWHXX0025CS Standard hood Elastic hood opening Set sleeve Attached thumb loops Attached boots with PVC soles MD-3X IC254BWHXX0025CS Bound seams Bound neck Dolman sleeve Covered elastic wrists Covered elastic ankles Snaps for aseptic donning IC181SWHXX SM-8X IC181SWHXX00250C Standard collar Set sleeve Zipper closure DUPONT TYVEK ISOCLEAN Made from DuPont Tyvek brand flashspun polyolefin protective material Unique, patented flash-spinning process creates a barrier to dry particles, microorganisms and non-hazardous liquids Comfortable, lightweight and durable Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio Garments available gamma sterilized to an SAL of 10 6 Serged or bound seams with covered elastic options Bound seam garments offer highest particle barrier within IsoClean product portfolio Traceability on all sterilized apparel Gripper soles offer a higher level of slip resistance than standard PVC soles Tyvek IsoClean is white Boot cover IC447SWHXX01000B MD-XL IC447SWHXX01000C MD-XL IC447SWHXX0100CS MD-2X Elastic opening Elastic ankle Gripper sole 18" high Boot cover IC457SWHXX01000B IC457SWHXX01000S Covered elastic opening Ties at ankle PVC sole 18" high SM-XL rock IC270BWHXX IC270BWHXX00300C IC270BWHXX0030CS Bound seams Bound neck Set sleeve Covered elastic wrist ront snap closure (6 + 1 adjustable) Boot cover IC458BWHXX01000B IC458BWHXX01000C IC458BWHXX0100CS Bound seams Covered elastic opening Ties at ankle Gripper sole 18" high MD-XL Shoe cover IC461SWHXX03000B Elastic opening PVC sole Elastic toe 5" high SM-XL rock IC264SWHXX00300B IC264SWHXX00300C IC264SWHXX0030CS Bound neck Raglan sleeve A-line 42 Customer Service SafeSPEC.DuPont.com PersonalProtection.DuPont.com