DUPONT TYVEK ISOCLEAN GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS

Size: px

Start display at page:

Download "DUPONT TYVEK ISOCLEAN GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS"

Ashlyn Douglas
5 years ago
Views:

P. 800.616.5319 E. Sales@CleanroomConnection.

portfolio, DuPont cleanprocessed and sterile single-use garments offer an ideal balance of protection, durability and comfort.

ISO 4/5 Controlled Environments clean and sterile bouffant (IC729SWH000250CS) bulk garments are available sterile and non-sterile in a wide variety of styles, such as s, frocks, lab coats, hoods,

1 P E. DUPONT TYVEK ISOCLEAN GARMENTS FOR ISO 4/5 (CLASS 10/100) AND ISO 7/8 (CLASS 10,000/100,000) CONTROLLED ENVIRONMENTS One of the most popular products in the DuPont Controlled Environments portfolio, DuPont cleanprocessed and sterile single-use garments offer an ideal balance of protection, durability and comfort. In addition, they feature the lowest linting and particle shedding of any garments in the DuPont portfolio. ISO 4/5 Controlled Environments clean and sterile bouffant (IC729SWH000250CS) bulk garments are available sterile and non-sterile in a wide variety of styles, such as s, frocks, lab coats, hoods, gowns, bouffants, shoe and boot covers and sleeve protectors. For more information on garments, see p. 18 of this catalog. ISO 7/8 Controlled Environments bouffant (IC729SWH B) clean and sterile hood (IC668BWH000100CS) Controlled Environment sterile face mask (ML7360WH S) frock with snaps (IC270BWH##003000) or frock with zipper (IC264SWH##00300B) clean and sterile (IC253BWH##0025CS) Garments folded to facilitate aseptic donning sterile cuff tape (994790WH S) Bound seam garments offer better particle barrier than. clean and sterile boot cover (IC458BWH##0100CS) Elastic wrists and ankles are covered by garment materials so the elastic is not exposed. shoe cover with Gripper sole (IC451SWH##01000B) Gripper soles offer a higher level of slip resistance than standard PVC soles. 8

2 Properties of DuPont DuPont garments are superior in terms of all of the physical properties that contribute to the quality of cleanroom garments, as shown in Tables III and IV below. Table III. Typical Physical Properties* of DuPont IsoClean Clean-Processed Property Standard Units Clean-Processed Basis Weight ASTM D3776 oz/yd Thickness ASTM D1777 mils 5.0 Bacterial Filtration Efficiency (3.0 µm) ASTM F2101 % 98.4 Particle Filtration Efficiency (0.5 µm) ASTM F2299** % 96.0 Particle Filtration Efficiency (>0.5 µm) IEST-RP-CC003.3 % 76.7 Grab Tensile, MD ASTM D5034 lb f 19.3 Grab Tensile, CD ASTM D5034 lb f 22.0 Mullen Burst ASTM D774 psi 55.0 Hydrostatic Head AATCC TM127 cm H 2 O 82.3 Surface Resistivity (55% RH) ASTM D257 ohms 1.0 x Flammability 16 CFR 1610 Class 1 *These properties are typical for garments that have not been sterilized. Sterilization may affect strength, water barrier and static dissipation. **Particles not neutralized. MD = Machine direction CD = Cross direction Table IV. Typical Physical Properties of DuPont IsoClean Bulk Property Standard Units Bulk Basis Weight ASTM D3776 oz/yd Thickness ASTM D1777 mils 5.4 Bacterial Filtration Efficiency (3.0 µm) ASTM F2101 % 99.0 Grab Tensile, MD ASTM D5034 lb f 18.0 Grab Tensile, CD ASTM D5034 lb f 25.5 Mullen Burst ASTM D774 psi 48.0 Hydrostatic Head AATCC TM127 cm H 2 O Surface Resistivity (55% RH) ASTM D257 ohms 6.3 x 10 9 Flammability 16 CFR 1610 Class 1 MD = Machine direction CD = Cross direction 9

3 DuPont NOTE: Please substitute your size for ## when ordering. See p. 17 for full part number description. IC253BWH##00250B IC253BWH##00250S IC253BWH##00250C IC253BWH##0025CS dolman sleeve, 5X IC105SWH## IC105SWH##00250C IC105SWH##0025CS standard hood elastic hood opening set sleeve attached thumb loops attached boots with PVC soles MD, LG, XL, 2X, 3X DuPont hood: IC668B : IC181S Made from DuPont Tyvek brand flashspun polyolefin protective material Unique, patented flash-spinning process creates an excellent barrier to dry particles, microorganisms and non-hazardous liquids Comfortable, lightweight and durable Clean-processed garments offer lowest level of particle shedding within DuPont product portfolio Garments available gamma sterilized to an SAL of 10 6 Serged or with covered elastic options Bound seam garments offer highest particle barrier within DuPont product portfolio Full traceability on all sterilized apparel Gripper soles offer a higher level of slip resistance than standard PVC soles IC254BWH##0025CS dolman sleeve snaps for aseptic donning IC258SWH##00250B IC258SWH##00250C raglan sleeve IC182BWH## IC182BWH##00250C IC182BWH##0025CS raglan sleeve IC181SWH## IC181SWH##00250C standard collar set sleeve, 5X, 6X, 7X, 8X for 00 option for 0C option Choose from these options: CS = Clean and Sterile: clean-processed, individually packaged and sterilized by gamma irradiation 0S = Sterile: individually packaged and sterilized by gamma irradiation 0C = Clean: clean-processed, individually packaged 00 or 0B = Bulk packaged PI = Individually packaged in an opaque bag PART NUMBER GUIDE IC 253 B WH LG 0025 CS fabric type garment design seam type color size case count options NOTE: All sizes not available in all styles. For universal sizing use 00 in the part number. Seams and closures have less barrier than fabric. WARNING: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, shoe covers or other garment surfaces in conditions where slipping could occur. 18

DuPont clean processed garments Technical Data sheet Protection and comfort in critical environments. apparel is breathable, lightweight and durable.

Both inventory and use costs are predictable, allowing you to predict your costs without replacement, repair or restocking fees.

4 DuPont clean processed garments Technical Data sheet Protection and comfort in critical environments. apparel is breathable, lightweight and durable. DuPont Tyvek delivers the ideal balance of protection, durability and comfort. Made using a patented flash spinning process, Tyvek features an inherent barrier. Every garment is new, clean and fresh. Both inventory and use costs are predictable, allowing you to predict your costs without replacement, repair or restocking fees. Key Benefits The ideal balance of protection, comfort and durability Excellent inherent barrier to dry particles, microorganisms and non-hazardous liquids Low linting and particle shedding Recyclable Clean processed and individually packaged in an ISO Class 4 (Fed. Std. 209E Class 10) Cleanroom Available gamma irradiated to a Sterility Assurance Level (SAL) of 10 6 and folded for aseptic donning Certificates of Sterility available for sterile garments High quality Wide Range of Applications Garments made of are used in the biotech, pharmaceutical, medical device manufacturing and electronics industries, as well as in other critical or controlled environments. With a wide range of proven, sciencebased solutions, DuPont products help ensure superior protection for your business critical systems, equipment and controlled environment production processes. Garment Styles to Meet Your Needs is available in a wide variety of garment and accessory styles, such as s, frocks, lab coats, hoods, gowns, bouffants, shoe and boot covers and sleeve protectors. The unique flash spinning process of Tyvek creates a tortuous path for particles. Image at 200x.

Typical Physical Properties of DuPont Clean Processed Property Units Tyvek IsoClean Clean Processed Standard Basis Weight oz/yd 2 1.3 ASTM D3776 Thickness mils 5.

3 Grab Tensile, MD lbf 19.3 ASTM D5034 Grab Tensile, CD lbf 22.0 ASTM D5034 Mullenburst psi 55.0 ASTM D774 Hydrostatic Head cm H 2 O 82.3 AATCC TM127 Surface Resistivity (55% RH) ohms 1.

These properties are typical for garments that have not been sterilized. Sterilization may affect strength, water barrier and static dissipation.

5 Typical Physical Properties of DuPont Clean Processed Property Units Tyvek IsoClean Clean Processed Standard Basis Weight oz/yd ASTM D3776 Thickness mils 5.0 ASTM D1777 Bacterial Filtration Efficiency (3.0 µ) % 98.4 ASTM F2101 Particle Filtration Efficiency (0.5 µ) % 96.0 ASTM F2299* Particle Filtration Efficiency (>0.5 µ) % 76.7 IEST-RP-CC003.3 Grab Tensile, MD lbf 19.3 ASTM D5034 Grab Tensile, CD lbf 22.0 ASTM D5034 Mullenburst psi 55.0 ASTM D774 Hydrostatic Head cm H 2 O 82.3 AATCC TM127 Surface Resistivity (55% RH) ohms 1.0 x ASTM D257 Flammability Class 1 16 CFR 1610 Particle Shedding (Helmke Drum) Category 1 IEST-RP-CC003.3 *Particles not neutralized. These properties are typical for garments that have not been sterilized. Sterilization may affect strength, water barrier and static dissipation. Seam Construction Even the best protective fabrics are useless without strong, tight seams. Seam construction available in serged or with covered elastic options. Bound Tightly sewn with a reinforced outer binding to increase seam strength and barrier. Serged A seam produced when three threads are interlocked around the raw edges of two pieces of material for a strong, stressresistant seam. Covered Elastic Elastic covered by garment material so elastic is not exposed. This information is based upon technical data that DuPont believes reliable. It is subject to revision as additional knowledge and experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user s responsibility to determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics, not complete garments, under controlled conditions. It is intended for information use by persons having technical skill for evaluation under the specific end-use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended use. In many cases, seams and closures may provide less barrier than the fabric. If the fabric becomes torn, abraded or punctured, end user should discontinue use of garment to avoid compromising the barrier protection. SINCE CONDITIONS OF USE ARE OUTSIDE OUR CONTROL, WE MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE AND ASSUME NO LIABILITY IN CONNECTION WITH ANY USE OF THIS INFORMATION. This information is not intended as a license to operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or others covering any material or its use. WARNINGS: 1) DuPont garments and accessories for controlled environments are not flame-resistant and should not be used around heat, flame, sparks or in potentially flammable or explosive environments. 2) Garments made of Tyvek should have slip-resistant or antislip materials on the outer surface of boots, shoe covers or other garment surfaces in conditions where slipping could occur. Copyright 2009 DuPont. The DuPont Oval Logo, DuPont, The miracles of science, Tyvek and IsoClean are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. All rights reserved. K (07/09) Printed in the U.S.A.

DuPont Controlled Environments PRODUCT CATALOG ADDENDUM ADDITIONS TO THE DUPONT PORTFOLIO

DuPont Controlled Environments PRODUCT CATALOG ADDENDUM ADDITIONS TO THE DUPONT PORTFOLIO WHY DUPONT CONTROLLED ENVIRONMENTS? BECAUSE you want to do everything you can to improve productivity and reduce